Home inspection means the on-site, physical review of the home of an applicant to assure the applicant and the home meets all health and safety requirements within these rules.
Processes with Significant Environmental Aspects means the Equipment which, during regular operation or if not properly operated or maintained, may cause or are likely to cause an adverse effect.
Construction and demolition waste means the waste building materials, packaging, and rubble resulting from construction, remodeling, repair, and demolition operations on pavements, houses, commercial buildings and other structures.
Initial Environmental Examination or “IEE” means the initial environmental examination for the Project, including any update thereto, prepared and submitted by the Borrower and cleared by ADB;
Natural environment means the air, land and water, or any combination or part thereof, of the Province of Ontario; (“environnement naturel”)
Demolition waste means that solid waste that is produced by the destruction of structures, or their foundations, or both, and includes the same materials as construction waste.
Structural Engineer means the Engineer appointed or to be appointed from time to time by Promoter for the preparation of the structural design and drawings of the buildings .
Adverse Environmental Condition means (i) the existence or the continuation of the existence, of an Environmental Contamination (including, without limitation, a sudden or non-sudden accidental or non-accidental Environmental Contamination), of, or exposure to, any substance, chemical, material, pollutant, Hazardous Substance, odor or audible noise or other release or emission in, into or onto the environment (including without limitation, the air, ground, water or any surface) at, in, by, from or related to any Equipment, (ii) the environmental aspect of the transportation, storage, treatment or disposal of materials in connection with the operation of any Equipment, or (iii) the violation, or alleged violation, of any Environmental Law, permits or licenses of, by or from any governmental authority, agency or court relating to environmental matters connected with any of the Equipment.
Construction and demolition debris means and includes:
Final Inspection means the process and procedure described in UGC Section 12.1.
Remediation waste management site means a facility where an owner or operator is or will be treating, storing or disposing of hazardous remediation wastes. A remediation waste management site is not a facility that is subject to corrective action under § 264.101 of this regulation, but is subject to corrective action requirements if the site is located in such a facility.
Construction waste means solid waste which is produced or generated during construction, remodeling, or repair of pavements, houses, commercial buildings, and other structures. Construction wastes include, but are not limited to lumber, wire, sheetrock, broken brick, shingles, glass, pipes, concrete, paving materials, and metal and plastics if the metal or plastics are a part of the materials of construction or empty containers for such materials. Paints, coatings, solvents, asbestos, any liquid, compressed gases or semi-liquids and garbage are not construction wastes.
Yard waste means leaves, grass clippings, yard and garden debris and brush, including clean woody vegetative material no greater than 6 inches in diameter. This term does not include stumps, roots or shrubs with intact root balls.
Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.
Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.
Solid waste facility means a site, location, tract of land, installation, or building used for incineration, composting, sanitary landfilling, or other methods of disposal of solid wastes or, if the solid wastes consist of scrap tires, for collection, storage, or processing of the solid wastes; or for the transfer of solid wastes.
Operating Environment means, collectively, the platform, environment and conditions on, in or under which the Software is intended to be installed and operate, as set forth in the Statement of Work, including such structural, functional and other features, conditions and components as hardware, operating software and system architecture and configuration.
Phase I Environmental Site Assessment means a Phase I environmental property assessment of the Assets that satisfies the basic assessment requirements set forth under the current ASTM International Standard Practice for Environmental Site Assessments (Designation E1527-13) or any other visual site assessment or review of records, reports or documents.
Stormwater management BMP means an excavation or embankment and related areas designed to retain stormwater runoff. A stormwater management BMP may either be normally dry (that is, a detention basin or infiltration system), retain water in a permanent pool (a retention basin), or be planted mainly with wetland vegetation (most constructed stormwater wetlands).
Materials of Environmental Concern any gasoline or petroleum (including crude oil or any fraction thereof) or petroleum products or any hazardous or toxic substances, materials or wastes, defined or regulated as such in or under any Environmental Law, including asbestos, polychlorinated biphenyls and urea-formaldehyde insulation.
Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;
Phase I Environmental Assessment A “Phase I assessment” as described in, and meeting the criteria of, the ASTM, plus a radon and asbestos inspection.
Internal inspection means as complete an examination as can be reasonably made of the internal and external surfaces of a boiler or pressure vessel while it is shut down and while manhole plates, handhole plates or other inspection opening closures are removed as required by the inspector.
Remediation waste means all solid and hazardous wastes, and all media (including groundwater, surface water, soils, and sediments) and debris that are managed for implementing cleanup.
Environmental pollution means the contaminating or rendering unclean or impure the air, land or waters of the state, or making the same injurious to public health, harmful for commer- cial or recreational use, or deleterious to fish, bird, animal or plant life.
Onsite means within the Prescribed Premises boundary.