Element 2 definition

Element 2. The Knowledge Novice Educator Developing Educator Proficient Educator Distinguished Educator
Sample 1Sample 2Sample 3
Element 2. (additional needs funding) is the funding provided to a School or College which allows the School or college to meet the costs of providing additional support to Learners with special educational needs up to a fixed amount.
Sample 1
Element 2. Increases appropriate, accessible care from community-based providers, e.g., TBAs; and • Element 3: Integrates promotion of key family practices, e.g., Ten Commandments for Good Health The project objective is to have at least 60 % of households informed and sensitized on key practices for child survival. Comments on past quarter and year 2 activities:
Sample 1

Examples of Element 2 in a sentence

  • The purpose of this change was to remove all features that were able to be funded at the full 70% cost share from Element 2 so that as a whole, all costs in Element 2 are funded at 50% and all costs in Element 3 are funded at 70% by the State.

  • Sewage sludge shall be tested at the frequency show below in Element 2, Section I.D. for PCBs. Any sludge exceeding a concentration of 50 mg/Kg shall not be surface disposed.

  • Element 2 — Billing Provider’s Provider IDEnter the Provider ID of the billing provider.

  • Element 2 — Process TypeEnter process type "131" for enteral nutrition products.

  • If Date of Latest Removal From Home (Element 21) is greater than nine months from Report Date (Element 2) then the Date of Most Recent Periodic Review (Element 5) must not be more than nine months prior to the Report Date (Element 2).

  • Element 2 Features 2.3, 2.4 and 2.5 (Preliminary Design, Preliminary Permitting and Preliminary Right of Way Support) have been moved to Element 3.

  • Work Element 2 - Technical Support & Data CollectionThis element outlines specific activities to be conducted in support of transportation planning tasks described in other UPWP elements.

  • Element 2 (Design) cannot commence until the training solution has been endorsed.

  • The CBA will likely be further refined during the Method & Media selection process in Element 2 (Design, Stage 2, 2.5).

  • This strategy was originally adopted by the WQCC in 1989 in the WQMP’s Work Element 6 and retained in the 2002 WQMP update in Work Element 2.


More Definitions of Element 2

Element 2. PROVIDE SECTION B POPULATED WITH ALL CLIN/SLIN UNIT PRICES. Provide a copy of Section B populated with the following CLIN/SLINs unit prices 0001, 0002, 0003, 0004, 0005, 0006, 0007, 0008, 0009, 0010, 0011, 0012, 0013, 0014, 0015, 0016, 0017, 0018, 0019, 0020, and 0021
Sample 1

Related to Element 2

  • Element means any electrical device with terminals that may be connected to other electrical devices such as a generator, transformer, circuit breaker, bus section, or transmission line. An Element may be comprised of one or more components.**

  • Specified anatomical areas means and includes:

  • Smart Meter means a meter which tells us how much Energy you are using without us having to visit your home and which enables you to see how much Energy you are using;

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Indicator means a quantitative or qualitative factor or variable that contributes to better understanding progress in implementing;

  • Enclosure means the part enclosing the internal units and providing protection against any direct contact.

  • Direction-indicator lamp means the lamp used to indicate to other road-users that the driver intends to change direction to the right or to the left;

  • Compression Ignition Engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Impact surface means an interior or exterior surface that is subject to damage by repeated sudden force such as certain parts of door frames.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • Area network means a type of electric distribution system served by multiple transformers interconnected in an electrical network circuit, which is generally used in large metropolitan areas that are densely populated, in order to provide highly reliable service. Area network has the same meaning as the term "distribution secondary grid network" found in institute of electrical and electronics engineers (IEEE) standard 1547 sub clause 4.1.4.

  • Cluster means the Group of exchanges/ cluster of contiguous exchanges.

  • Side Yard means a yard extending from the front yard to the rear yard between the side boundary of the parcel and the wall of main building thereon [see sketch in Schedule B];

  • Runtime Product means the version specific files and application program interfaces (APIs) specified in the RUNTIME.TXT file provided with SAP Crystal Reports 2008, SAP Crystal Reports for Eclipse 2.0, and SAP Crystal Reports for Visual Studio 2010.

  • Local Area Network or “LAN” means the infrastructure that enables the ability to transfer IP services within Sites (including data, voice and video conferencing services).

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Monitoring Indicator means a measure of HSP performance that may be monitored against provincial results or provincial targets, but for which no Performance Target is set;

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • SPID is the number that identifies a service provider to the relevant NPAC. The SPID may be a state-specific number. "Serving Wire Center" denotes the CenturyLink building from which dial tone for local Exchange Service would normally be provided to a particular End User Customer premises. "Signaling System 7" or "SS7" is an out-of-band signaling protocol consisting of four basic sub- protocols:

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Suction outlet means the opening or fitting through which the water under negative pressure is drawn from the pool or spa.

  • Attachment Facilities means the facilities necessary to physically connect a Customer Facility to the Transmission System or interconnected distribution facilities.