Electrical Installation Regulations definition

Electrical Installation Regulations means the Electrical Installation Regulations of 1992 promulgated under section 35 of the Machinery and Occupational Safety Act of 1983 (Act No. 6 of 1983);
Sample 1Sample 2Sample 3
Electrical Installation Regulations means the Electrical Installation Regulations, 2009 promulgated in terms of the Occupational Health & Safety Act No. 85 of 1993.
Sample 1Sample 2Sample 3
Electrical Installation Regulations. ’ means Electrical Installation Regulations made in terms of the Occupational Health and Safety Act, 1993 (Act 85 of 1993), as amended;
Sample 1Sample 2

Examples of Electrical Installation Regulations in a sentence

  • Electrical Distribution Boards shall comply with OHSA as referred to in the Electrical Installation Regulations and the Electrical Machinery Regulations.

  • The Seller shall at the Seller's own expense furnish a certificate of compliance from an accredited person in respect of all electrical installations in the Property in accordance with the requirements of the Electrical Installation Regulations made under the Occupational, Health and Safety Act No. 85 of 1983.

  • The PURCHASER hereby undertakes to furnish the SELLER's Attorneys, prior to occupation or transfer by the PURCHASER, whichever is the earlier, with a Certificate of Compliance in respect of the PROPERTY, in terms of the Electrical Installation Regulations of 2009 under the Occupational Health and Safety Act (Act No. 85 of 1993, as amended), issued by an electrical contractor who is registered in terms of the Regulations.

  • The SELLER hereby undertakes to furnish the SELLER's Attorneys, prior to occupation or transfer by the PURCHASER, whichever is the earlier, with a Certificate of Compliance in respect of the PROPERTY, in terms of the Electrical Installation Regulations of 2009 under the Occupational Health and Safety Act (Act No. 85 of 1993, as amended), issued by an electrical contractor who is registered in terms of the Regulations.

  • Prior to the Transfer Date the Seller at its expense shall provide the Purchaser with a certificate of compliance issued by a registered person as defined in the Electrical Installation Regulations in accordance with the provisions of Regulation 7(1) to the effect that the electrical installations in the Unit are deemed to be reasonably safe when properly used.

  • The Seller hereby undertakes to furnish the Seller‘s Attorneys, prior to transfer to the Purchaser, with a Certificate of Compliance in respect of the Property, in terms of the Electrical Installation Regulations of 2009 under the Occupational Health and Safety Act (Act No. 85 of 1993, as amended), issued by an electrical contractor who is registered in terms of the Regulations.

  • The Seller hereby undertakes to furnish the Seller‘s Attorneys, prior to transfer of the Sale Object to the Purchaser, with a Certificate of Compliance in respect of the Sale Object, in terms of the Electrical Installation Regulations of 2009 under the Occupational Health and Safety Act (Act No. 85 of 1993, as amended), issued by an electrical contractor who is registered in terms of the Regulations.

  • Certificate Comment [SF16]: optional Within thirty (30) days of the Date of Signature, the Seller at the Seller’s expense shall provide the Purchaser with a Certificate of Compliance issued by an authorised electrician who is an accredited person in terms of the Electrical Installation Regulations to the effect that the electrical installations in the Property comply with the provisions of Regulation 4 (1) or that the installations are reasonably safe, as the case may be.

  • The Parties record that the Property comprises vacant land and accordingly an Electrical Compliance Certificate in terms of the Electrical Installation Regulations, 2003 (issued in terms of the Occupational Health and Safety Act, 1993) (the “ECC”) is not required.

  • The Seller further undertakes to furnish the Purchaser, prior to transfer, with a certificate of compliance issued by an accredited person, declaring that the electrical installation in the Property (up to and including the distribution board) complies with the provisions of Regulation 4(1) of the Electrical Installation Regulations of the Machinery and Occupational Safety Act.

Related to Electrical Installation Regulations

  • electrical installation means an electrical installation as defined in the Regulations;

  • Installations means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Internal Installation or “Internally Install” means installing into production Client Applications and/or Server Applications on one or more computers within Licensee’s company or organization only in connection with Licensee’s internal business purposes.

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Installation Works means, as the context so requires,

  • Type 3 Installation means any Technical Installation upon which none of the SW, or only a portion of the SW, deployed is licensed for Use with such TPD, and therefore a TPD is not deployed or running.

  • Utility system means a water system, solid waste

  • Interconnection Regulations means the Telecommunication (Broadcasting and Cable) Services Interconnection (Addressable Systems) Regulations, 2017 (as amended).

  • Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Electrical Inspector means a person appointed as such by the Appropriate Government under sub-section (1) of Section 162 of the Electricity Xxx 0000 and also includes Chief Electrical Inspector;

  • Utility Installation means carpeting, window and wall coverings, power panels, electrical distribution systems, lighting fixtures, air conditioning, plumbing, and telephone and telecommunication wiring and equipment. At the expiration of the term, Lessor may require the removal of any or all of said alterations, improvements, additions or Utility Installations, and the restoration of the Premises and the Office Building Project to their prior condition, at Lessee's expense. Should Lessor permit Lessee to make its own alterations, improvements, additions or Utility Installations, Lessee shall use only such contractor as has been expressly approved by Lessor, and Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, or use a contractor not expressly approved by Lessor, Lessor may, at any time during the term of this Lease, require that Lessee remove any part or all of the same.

  • Installation Site means the site at which the Product is originally installed.

  • collision regulations means the regulations made under section 285 for the prevention of collisions at sea;

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Type 1 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, and is running on, such TPD;

  • Telecommunications Equipment means equipment, other than Customer Premises Equipment, used by a Carrier to provide Telecommunications Services, and include software integral to such equipment, including upgrades.

  • Sewage system means the entire sewage treatment and subsurface disposal system;

  • Alterations means all changes, additions, improvements or repairs to, all alterations, reconstructions, renewals, replacements or removals of and all substitutions or replacements for any of the Improvements or Equipment, both interior and exterior, structural and non-structural, and ordinary and extraordinary.

  • Electrical work Concealed and fire resistant wiring of “ISI” Copper Wire, Distribution board with “MCB”. “ISI” xxxx modular electrical accessories, Landline phone conduit, Cable TV wiring conduit, Separate line for inverter connection, Air-conditioner power point. Painting : Long Lasting and weather resistant acrylic paint to all external walls, All internal walls with white cement based putty finish with OBD. Plumbing & Sanitation : Sanitary xxxx for toilets, plumbing fixtures, CPVC/UPVC pipe and fitting(ISI make), SWR drainage system. Kitchen: Granite platform, ceramic tiles dado upto 2’ height, Stainless Steel sink in Kitchen, Aquaguard point, Connection for washing machine in wash area.

  • drainage installation means a system situated on any premises and vested in the owner thereof and is used for or intended to be used for or in connection with the reception, storage, treatment or conveyance of sewage on that premises to the connecting point and includes drains, fittings, appliances, septic tanks, conservancy tanks, pit latrines and private pumping installations forming part of or ancillary to such systems;

  • Loss Absorption Regulations means, at any time, the laws, regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities and/or loss absorbing capacity instruments of the United Kingdom, the PRA, the United Kingdom resolution authority, the Financial Stability Board and/or of the European Parliament or of the Council of the European Union then in effect in the United Kingdom including, without limitation to the generality of the foregoing, any delegated or implementing acts (such as regulatory technical standards) adopted by the European Commission and any regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities and/or loss absorbing capacity instruments adopted by the PRA and/or the United Kingdom resolution authority from time to time (whether or not such regulations, requirements, guidelines, rules, standards or policies are applied generally or specifically to the Company or to the Regulatory Group).

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Drainage system means one or more artificial ditches, tile drains or similar devices which collect surface runoff or groundwater and convey it to a point of discharge.

  • Appliances means and include electrical, mechanical and electronic appliances such as refrigerator, television, DVD player, videocassette recorder/player, washing machine, microwave oven, music system, personal computer, laptops and air-conditioner contained or fixed in the Insured’s home for domestic use.

  • Electricity Act means the Electricity Act, 1998, S.O. 1998, c. 15, Schedule A;