Dosing system definition

Dosing system means the system of tanks, pumps or syphons, and piping located between the septic tank and soil absorption system which is intended to apply a large quantity of settled wastewater to the absorption system in a short period of time.
Sample 1Sample 2Sample 3

Examples of Dosing system in a sentence

  • Symbols denote the flight module types level leg (LL), sawtooth pattern (SAW) and vertical profiles (PRF).

  • Dosing system comprising of an electronic metering pump with, 100 lit capacity uPVC/HDPE solution tank with level gauge and lid on top.

  • Dosing system having trip interlocks with HP feed pump to RO membrane to get ripped if the HP pump trips.

  • The subdivision complies with all other requirements of the Carlton County Zoning Ordinance.

  • The Dosing system shall include Polymer / Polyelectrolyte dosing system.

  • The turbine auxiliaries shall comprise of the following:- • Turbine Seal steam system • Turbine lube oil systems • Turbine Control system (Control Fluid System) • Feed pumps • HP/LP Heaters and deaerator • Surface Condenser • Condensate Extraction Pumps • LP Dosing system • Vacuum Raising System • Central lube oil storage & Purification system • HP/LP bypass system • Protection and interlock systems.

  • Seepage Pit Cross Section31ExamplesPageExample 1: Calculating Percolation Rates6Example 2: Size of a Septic Tank14Example 3: Size of an Absorption Field 16Example 4: Size a Pressure Distribution Network 22Example 5: Size of a Seepage Pit 32Appendix Appendix A - Example Gravity Sewer Calculation Appendix B – Drawing DetailsSeptic Tank Details Absorption Bed and Trench Details Dosing system LayoutLeaching Chambers Option 1A and 1B (Traffic Loading) Leaching Chambers Option 2 1.

  • Supervisory control panel for Dosing system for 2X500MW(SGP) Vindhyachal super thermal power project of M/s.NTPC.

  • Backwash of Filters and shall be done intermittently as per requirements The filtered water being stored in the filtered water tank shall again be dosed with chlorine by a suitable chlorinator Dosing system and a residual Chlorine level of 1 PPM shall be maintained.

  • The Dosing system shall be packaged plant type with Tanks (PP-FRP), Agitators, Dosing Pumps, Level Transmitter, polymer educator with hoper etc.

Related to Dosing system

  • Monitoring System means a system established by BNY to fulfill the Responsibilities specified in clauses (d) and (e) of Section 1 of Article III of this Agreement.

  • smart metering system means an electronic system that can measure energy consumption, providing more information than a conventional meter, and can transmit and receive data for information, monitoring and control purposes, using a form of electronic communication;

  • Plumbing system means water supply distribution and disposal piping on the premises, including appliances and equipment attached thereto, between their connection points to a public or private system.

  • Net metering system means a facility for the production of electrical energy that does all of the following:

  • Grid System means STU / MSEDCL power transmission system / distribution system through which Delivered Energy is evacuated and distributed.

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Automated driving system means the same as that term is defined in Section 41-26-102.1.

  • Operating System refers to the software that manages Hardware for Programs and other software.

  • Primary dose monitoring system means a system which will monitor the useful beam during irradiation and which will terminate irradiation when a preselected number of dose monitor units have been delivered.

  • Performance Monitoring System has the meaning given to it in paragraph 1.1.2 in Part B of Schedule 6 (Service Levels, Service Credits and Performance Monitoring);

  • System Impact Study means an assessment by the Transmission Provider of (i) the adequacy of the Transmission System to accommodate a Completed Application, an Interconnection Request or an Upgrade Request, (ii) whether any additional costs may be incurred in order to provide such transmission service or to accommodate an Interconnection Request, and (iii) with respect to an Interconnection Request, an estimated date that an Interconnection Customer’s Customer Facility can be interconnected with the Transmission System and an estimate of the Interconnection Customer’s cost responsibility for the interconnection; and (iv) with respect to an Upgrade Request, the estimated cost of the requested system upgrades or expansion, or of the cost of the system upgrades or expansion, necessary to provide the requested incremental rights. System Protection Facilities: “System Protection Facilities” shall refer to the equipment required to protect (i) the Transmission System, other delivery systems and/or other generating systems connected to the Transmission System from faults or other electrical disturbance occurring at or on the Customer Facility, and (ii) the Customer Facility from faults or other electrical system disturbance occurring on the Transmission System or on other delivery systems and/or other generating systems to which the Transmission System is directly or indirectly connected. System Protection Facilities shall include such protective and regulating devices as are identified in the Applicable Technical Requirements and Standards or that are required by Applicable Laws and Regulations or other Applicable Standards, or as are otherwise necessary to protect personnel and equipment and to minimize deleterious effects to the Transmission System arising from the Customer Facility. Transmission Facilities:

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this article, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Fraud Monitoring System means an off-line administration system that monitors suspected occurrences of ABT- related fraud.

  • Continuous monitoring system means the total equipment, required under the emission monitoring section in applicable subsections used to sample and condition (if applicable), to analyze, and to provide a permanent record of emissions or process parameters.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.