Design Record definition

Design Record means the compilation of the Owner’s Project requirements, Owner objectives, design narrative, design basis and performance metrics.
Sample 1Sample 2Sample 3
Design Record means the compilation of the Owner’s Project requirements, Owner objectives, design narrative, design intent documentation, design basis, and performance metrics.
Sample 1Sample 2

Examples of Design Record in a sentence

  • Notice shall include at a minimum: the CTS Circuit Design Record number; Site name; Site address (A-LOC and Z-LOC); Carrier Billing Telephone Number; and carrier circuit ID number.

  • Provided, however, that where such laws or regulations establish only a minimum quality, accuracy, strength, capacity, or safety or health standard, which may be below or less stringent than those required under either the Design Record (E(2)I(C)(2) and (3)) or under V(A)(1)(a) and (b), Commissioning Agent’s Services will conform to the higher or more stringent standard.

  • Confirmation that the required documentation for the system has been produced in accordance with the requirements for Integrated Logistic Support including Ship Design Record & Configuration Management refer to 0660 C 405.

  • These documents, together with the Owner’s Project Requirements, will be the Design Record for the project.

  • Notice shall include at a minimum: the CTS Circuit Design Record number;Site name; Site address (A-LOC and Z-LOC); and carrier circuit ID number.

  • Notice shall include at a minimum: the CTS Circuit Design Record number; Site name; Site address (A-LOC and Z-LOC); and carrier circuit ID number.

  • The Design Record will change over the course of the project and will be updated into a final document that reflects the as-built condition of the project.

Related to Design Record

  • Design flow means the average annual flow or average daily flow specified in an approved facilities plan or approved plans and specifications, the flow specified in a WPDES permit, or the flow required to meet performance standards.

  • Project Record means the separate set of Drawings and Specifications as further set forth in paragraph 4.02A.

  • Research record means any data, document, computer file, computer diskette, or any other written or non-written account or object that reasonably may be expected to provide evidence or information regarding the proposed, conducted, or reported research that constitutes the subject of an allegation of research misconduct. A research record includes, but is not limited to, grant or contract applications, whether funded or unfunded; grant or contract progress and other reports; laboratory notebooks; notes; correspondence; videos; photographs; X-ray film; slides; biological materials; computer files and printouts; manuscripts and publications; equipment use logs; laboratory procurement records; animal facility records; human and animal subject protocols; consent forms; medical charts; and patient research files.

  • Clinical record means a legible electronic or hard-copy history that documents the criteria established for medical records as set forth in rule 441—79.3(249A). A claim form or billing statement does not constitute a clinical record.

  • Technical Report means a report prepared and filed in accordance with this Instrument and Form 43-101F1 Technical Report that includes, in summary form, all material scientific and technical information in respect of the subject property as of the effective date of the technical report; and

  • Design Manual means the MOHLTC design manual or manuals in effect and applicable to the development, upgrade, retrofit, renovation or redevelopment of the Home or Beds subject to this Agreement.

  • Design-build means a project delivery method in which the detailed design and subsequent construction is provided through a single contract with a Design-Build firm; a team, partnership, or legal entity that includes design professionals and a builder. The Design-Build Project delivery shall be implemented in accordance with Tex. Gov’t Code § 2166.2531.2

  • Design Phase means the period during which the Transporter shall prepare a draft project proposal for publication in accordance with section 4.3;

  • Design Documentation means all schematics and test, assembly and package documentation relating to the Product, including all design, specification and assembly documentation and data files for Materials, which is necessary for the production, manufacture, qualification, testing and delivery of the Product to be attached as Exhibit A.

  • Open record means a record other than a confidential record.

  • Batch Record means the production record pertaining to a Batch.

  • Design Documents means, collectively and as applicable, the Conceptual Design Documents, Schematic Design Documents, the Design Development Documents and the Construction Documents prepared by the Trade Contractor.

  • Design-Builder means the Person selected pursuant to the RFP that enters into the Contract with the Department to design and construct the Project (also referred to as the “Design-Build Team”).

  • Schematic Design Documents means drawings prepared by the Trade Contractor that illustrate the scale and relationship of the various Trade Contractor Work components and which also contain square footage and volume calculations for the building interior spaces, building exterior spaces, and major architectural and interior finishes.

  • Application Software means Software formulated to perform specific business or technical functions and interface with the business or technical users of the System and is identified as such in Appendix4 of the Contract Agreement and such other Software as the parties may agree in writing to be Application Software.

  • technical specification means, with respect to any Software, the document setting forth the technical specifications for such Software and included in the Statement of Work.

  • Design torso angle means the angle measures between a vertical line through the "R" point and the torso line in a position which corresponds to the design position of the seat-back established by the vehicle manufacturer;

  • Client Application means an application developed by Customer that a) utilizes the Runtime Product, b) is installed fully on an end user’s machine, with all report processing local to that machine, and c) adds significant and primary functionality to the Runtime Product.

  • Design-build entity means a corporation, limited liability company, partnership, joint venture, or other legal entity that is able to provide appropriately licensed contracting, architectural, and engineering services as needed pursuant to a design-build contract.

  • Medical record means any document or combination of documents, except births, deaths, and the fact of admission to or discharge from a hospital, that pertains to the medical history, diagnosis, prognosis, or medical condition of a patient and that is generated and maintained in the process of medical treatment.

  • Geotechnical report or "geotechnical analysis" means a scientific study or evaluation conducted by a qualified expert that includes a description of the ground and surface hydrology and geology, the affected land form and its susceptibility to mass wasting, erosion, and other geologic hazards or processes, conclusions and recommendations regarding the effect of the proposed development on geologic conditions, the adequacy of the site to be developed, the impacts of the proposed development, alternative approaches to the proposed development, and measures to mitigate potential site-specific and cumulative geological and hydrological impacts of the proposed development, including the potential adverse impacts to adjacent and down-current properties. Geotechnical reports shall conform to accepted technical standards and must be prepared by qualified professional engineers or geologists who have professional expertise about the regional and local shoreline geology and processes.

  • Contractor Software means software which is proprietary to the Contractor, including software which is or will be used by the Contractor for the purposes of providing the Services.

  • Routine maintenance means activities to keep an impervious surface as near as possible to its constructed condition. This includes ordinary maintenance activities, resurfacing paved areas, and exterior building changes or improvements which do not materially increase or concentrate stormwater runoff, or cause additional nonpoint source pollution.

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Design-build team means an entity that consists of:

  • Mechanical Completion means that (a) all components and systems of the Project have been properly constructed, installed and functionally tested according to EPC Contract requirements in a safe and prudent manner that does not void any equipment or system warranties or violate any permits, approvals or Laws; (b) the Project is ready for testing and commissioning, as applicable; (c) Seller has provided written acceptance to the EPC Contractor of mechanical completion as that term is specifically defined in the EPC Contract.