Delay time definition

Delay time means the difference in time between the change of the component to be measured at the reference point and a system response of 10 per cent of the final reading (t10) with the sampling probe being defined as the reference point.
Sample 1Sample 2Sample 3
Delay time means the difference in time between the change of the component to be measured at the reference point and a system response of 10 per cent of the final reading (t10) with the sampling probe being defined as the reference point. For gaseous components, this is the transport time of the measured component from the sampling probe to the detector.
Sample 1Sample 2Sample 3
Delay time means the time between the change of the component to be measured at the reference point and a system response of 10 % of the final reading (t10). For the gaseous components, this is basically the transport time of the measured component from the sampling probe to the detector. For the delay time, the sampling probe is defined as the reference point;
Sample 1Sample 2Sample 3

Examples of Delay time in a sentence

  • In the event of any such Excusable Delay, time for performance shall be extended for a period of time as may be reasonably necessary to compensate for such delay.

  • Delay time will be paid if the driver is instructed to be at work at a specific hour and no equipment is available at the start of the shift.

  • Delay time due to running out of fuel resulting from proven mechanical failure, or when driver complies with Employer fueling procedure, shall be paid at the appropriate hourly rate.

  • Subject to any extensions expressly provided in this Lease and Unavoidable Delay, time is of the essence as to the performance of the provisions of this Lease by Landlord and Tenant.

  • Delay time shall be treated as hours worked and paid at the straight time rate.

  • In the event of any such Excusable Delay, time for performance shall be extended for a period as may be reasonably necessary to compensate for such delay.

  • Delay time in return of approved drawings will extend the proposed date(s).

  • The Delay time has a resolution of 8 minutes - 32 seconds (512seconds) and a maximum value of 582 hours.

  • The Contractor's right to proceed shall not be so terminated nor shall the Contractor be charged with resulting damage ifthe delay in the completion of the work was not the fault of the Contractor as in section 5., "Delay; time extensions." (HAR 3-125-18] (02/09) GCDB -61.

  • Packet Delay (PD) Y.1540: IPTD Packet Delay may affect the feasibility of interactive services and remote productions since these services are sensitive to the Round Trip Delay time.


More Definitions of Delay time

Delay time means the time from the gas flow switching (t0) until the response reaches 10 per cent (t10) of the final reading.
Sample 1Sample 2Sample 3
Delay time means the time from first ring until xxxxxx speaks with CSR. Minimum delay time: 180 seconds quarterly average. $5,000 per quarter if > 180 second avg. per quarter. List of Liquidated Damages: Service Delivery (Applies to Each Service District)
Sample 1
Delay time means the time from the gas flow switching...
Sample 1
Delay time means the difference in time between the change of the component to Deleted: <#>"Conversion efficiency
Sample 1

Related to Delay time

  • Minimum Run Time For all generating units that are not combined cycle units, “Minimum Run Time” shall mean the minimum number of hours a unit must run, in real-time operations, from the time after generator breaker closure, which is typically indicated by telemetered or aggregated State Estimator megawatts greater than zero, to the time of generator breaker opening, as measured by PJM's State Estimator. For combined cycle units, “Minimum Run Time” shall mean the time period after the first combustion turbine generator breaker closure, which is typically indicated by telemetered or aggregated State Estimator megawatts greater than zero, and the last generator breaker opening as measured by PJM’s State Estimator.

  • Real-time means the actual time in which an event takes place, with the reporting on or the recording of the event simultaneous with its occurrence.

  • Maximum Run Time means the maximum number of hours a generating unit can run over the course of an Operating Day, as measured by PJM’s State Estimator.

  • Date The Effective Date (as defined in the Funding Agreement) Acknowledged and Agreed: THE PRINCIPAL LIFE INCOME FUNDINGS TRUST DESIGNATED IN THIS GUARANTEE By: U.S. Bank Trust National Association, not in its individual capacity, but solely in its capacity as trustee By: Bankers Trust Company, N.A., under Limited Power of Attorney, dated February 16, 2006 By: /s/ Dxxxx X. Xxxx Name: Dxxxx X. Xxxx Title: Vice President Date: The Effective Date (as defined in the Funding Agreement)

  • Real-time Energy Market means the purchase or sale of energy and payment of Transmission Congestion Charges for quantity deviations from the Day-ahead Energy Market in the Operating Day.

  • Trading Day means a day on which the principal Trading Market is open for trading.