Degree Days definition

Degree Days means a measure of coldness based on the extent to which the daily mean temperature falls below 65 degrees F. For example, on a day when the average temperature is 35 degrees F, there would be 30 degree days experienced.
Sample 1Sample 2Sample 3
Degree Days represent the difference between sixty-five degrees Fahrenheit and the mean temperature on a given day, provided that the mean temperature on such day is less than sixty-five degrees Fahrenheit.
Sample 1Sample 2
Degree Days are a means of expressing weather temperature deviation from base level, usually calculated by adding a particular day’s high and low temperatures, dividing by two, and subtracting from a base level (the National Weather service uses 65 degrees for heating). Example: The high and low for a certain day are 46 and 12 degrees. The sum of 58 is divided by two to yield an average temperature of 29 degrees. This is subtracted from 65 to yield 36 heating degree days. High degree days (for either cooling or heating) reflect higher energy usage. Glossary of Energy & Utility Terms, McGuireWoods LLP, (1993) at 15-16.
Sample 1

Examples of Degree Days in a sentence

  • The Company will determine on a monthly basis, Degree Days, Cumulative Degree Days, Normal Degree Days, Cumulative Normal Degree Days, Deadband Degree Days and Cumulative Deadband Degree Days for each month during the Base Year.

  • Cumulative Deadband Degree Days will be added to or subtracted from Cumulative Normal Degree Days to yield an Upper Level or Lower Level Degree Day Threshold.

  • It shall be utilized to adjust the Company’s revenues in cases wherein temperatures experienced during a Base Year yield more or less degree days than were experienced on a twenty-year normal basis, plus or minus one-half (1/2%) percent of the sum of the Cumulative Normal Degree Days, for the twenty-year period utilized in the Company's then most recent base rate case.

  • If the experienced cumulative Degree Days at the end of a Base Year month is higher than the Upper Level of the Degree Day Threshold, or lower than the Lower Level, a Degree Day Adjustment will be made.

  • The factors for the TAC are as follows:Normal Degree DaysCumulativeNormal Degree Days Deadband Degree DaysCumulativeDeadband Degree Days Oct.

  • To the extent Actual Calendar Month Degree Days were less than Normal Calendar Month Degree Days as adjusted for the Degree Day Dead Band, a deficiency of marginal revenue exists.

  • This calculation is made by multiplying the monthly Degree Day Consumption Factor by the difference between Normal Calendar Month Degree Days as adjusted for the Degree Day Dead Band, and Actual Calendar Month Degree Days and, in turn, multiplying the result by the Margin Revenue Factor.

  • To the extent the Actual Calendar Month Degree Days exceeds Normal Calendar Month Degree Days as adjusted for the Degree Day Dead Band, an excess of margin revenues exist.

  • The CME Degree Days Indexes and Listing CitiesEach particular CME Degree Days index, is the accumulation of like Degree Days over a calendar month.

  • Actual Degree Days shall be based on National Weather Service published average daily temperatures for Washington National Airport Station.

Related to Degree Days

  • Billing Month is defined in Section 9.1(b).

  • Day/Days means calendar days, inclusive of Saturdays, Sundays and public holidays.

  • Average Daily Flow means the cumulative total sewage flow to the sewage works during a calendar year divided by the number of days during which sewage was flowing to the sewage works that year;

  • Work Days means judicial days (or a day when the court is open).

  • Free look period means the period of time during which a borrower may cancel a guaranteed asset protection waiver without penalty, fees, or costs to the borrower. A free look period must begin on the effective date of the guaranteed asset protection waiver, and the term of a free look period must be at least 30 days.

  • Average value means the value which best represents the amount of the nutrient which a given food contains, and reflects allowances for seasonal variability, patterns of consumption and other factors which may cause the actual value to vary.

  • Free period means any Period other than the Prohibited Period.

  • Averaging Period means the time over which a limit is measured or a monitoring result is obtained;

  • Peak Hours or “Peak Period” means the period with the highest ridership during the entire transit service day as determined by the transit operator. Must include at least one hour during the morning commute hours and one during evening commute hours, Monday through Friday. Each Peak Period cannot be longer than three hours.

  • Core Hours means the period beginning at 8am and ending at 6.30pm on any day from Monday to Friday except Good Friday, Christmas Day or bank holidays;

  • Billing cycle or billing period means the period for which regular electricity bills as specified by the Commission, are prepared for different categories of consumers by the licensee;

  • Days means calendar days.

  • Production Period is the period that for winter cereal advances commences October 1, 2021 and terminates September 30, 2023; for advances on all other field crops, honey, hogs, goats, sheep and lambs commences April 1, 2022 and terminates September 30, 2023; and for advances on cattle, continuous flow cattle, and bison commences on April 1, 2022 and terminates on March 31, 2024.

  • Completion Period means the period starting from the date of issue of "Order" and required to complete the work in all respect.

  • Working Days means any day other than a Saturday, Sunday or public holiday in England and Wales; and

  • STIPULATED HOURS OF SERVICE PER DAY means hours of duty per day, normal hours/timings of duty whereof shall be determined by the Company's Engineer for which fixed charge shall be payable.

  • Per day means per calendar day or part thereof.

  • Week means seven consecutive days.

  • Billing Period means (subject to Article 6.1 of the Agreement) the calendar month ending with the Metering Date. The first Billing Period shall commence from the Commercial Operation Date and end with the Metering Date corresponding to the month in which the Commercial Operation Date occurs.

  • Teaching days means days on which classes were engaged. Examination days are not to be included)

  • Relapse means the process which may result in the return to the use of substances after a period of abstinence.

  • Period shall have the meaning ascribed to it in Schedule 8;

  • Program Period means the period of time which the department intends to support the program without requiring the recompetition for funds. The program period is specified within the grant application.

  • Peak Period means the time between 6 a.m. and 10 p.m. (April through September) or between 7 a.m. and 11 p.m. (October through March) on all days except Saturdays and Sundays, which daily time period will be subject to change from time to time at the Company's option. This change would occur after no less than ten (10) days notice has been given to all Customers who would be affected, and to the Commission.

  • Programme Date means the date of this Base Prospectus.

  • Downtime means the Total Minutes in the Month during which the Cloud Service (or Servers for Server Provisioning) does not respond to a request from SAP’s Point of Demarcation for the data center providing the Cloud Service (or Server for Server Provisioning), excluding Excluded Downtime.