Customer Installation definition

Customer Installation means any structures, equipment, lines, appliances or devices used or to be used by a Customer and connected or to be connected directly or indirectly to the Distribution System.
Customer Installation means, in general, all wiring, appliances and apparatus of any kind or nature on customer’s side of the point of delivery (except Company’s meter installation) used or useful in connection with the customer’s ability to take electric service.
Customer Installation or “customer facility” means a facility that is connected to a system operator's grid, owned by a party entitled to system access and used to produce (feed in) or consume (take off) gas;

Examples of Customer Installation in a sentence

  • Customer Installation does not include third party installation services purchased from Dell.

  • The Customer is fully responsible for the back-up of any Customer Installation Information.

  • The Customer must not use or exploit the Intellectual Property Rights (including the moral rights) of the author of the Customer Installation Information.

  • Upon Neuronetics completing the physical installation of the System, Neuronetics and Customer Installation Personnel shall inspect the System for damage and for its operation in accordance with Neuronetics’ then-current installation criteria using such checklists as Neuronetics may provide for this purpose.

  • Komatsu will take security measures required for protection of the Customer Installation Information according to industry standards.

  • If the Customer Installation Information provided by the Customer contains the information of a third party other than the Customer (including subcontractors of the Customer), the Customer warrants that it will acquire the consent of the third party regarding the information captured by clause 4.1 in advance of providing the information to SMART CONSTRUCTION (including when the information is input into the Application).

  • A - This guide, entitled “Natural Gas Service Customer Installation Guide”, is issued as a means of exchanging pertinent information between Consolidated Edison Co. of NY, Inc.

  • A memorandum of appeal shall not seek relief or reliefs based on more than a single cause of action in one single memorandum of appeal unless the reliefs prayed for are consequential to one another.

  • In the case where the Customer provides the Application with the Customer Installation Information via the data collaboration provider, the Customer will observe the terms and conditions of the data collaboration provider.

  • POST Telecom is not responsible for ensuring that a Customer Installation is suitable or compliant.


More Definitions of Customer Installation

Customer Installation means the installation program of the Deputy Application made available by Deputy to its Customers which may vary from time to time through a nominated URL published or provided by Deputy to its Customers.
Customer Installation any physical element, other than Infrastructure elements, under the physical control of the Customer and capable of interacting with a Service (including computer, television via decoder, telephone equipment, etc.) or necessary for the provision thereof (including any Product, wiring inside buildings, ducting and housings);
Customer Installation. This means equipment that has been purchased and is owned by you (the Customer) and is installed by you (the Customer) into racks and/or cabinets in data centres that Exigent Australia occupy.
Customer Installation any physical element, other than Infrastructure elements, under the physical control of the Customer and capable of interacting with a Service (including Sector, and all codes and rules, laws and regulations, statements and requirements applicable under these laws or drawn up or imposed by any authoritative regulator. For the sake of clarity, the Regulatory Requirements also include all legal and/or regulatory provisions applicable to the fight against corruption, market abuse and xxxxxxx xxxxxxx, fraud and money laundering;
Customer Installation means all pipes, shut-offs, valves, fixtures, appliances and/or apparatus of every kind and nature located (or to be located) on a Developer’s or Customer’s side of the Point of Connection necessary for District to deliver water and/or

Related to Customer Installation

  • water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;

  • meter installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;

  • Customer’s Installation means an Electrical Installation and includes Distributed Generation, if Distributed Generation is connected to a Customer's Installation; "Customer’s Premises" means the land and buildings owned or occupied by a Customer, and any land over which the Customer has an easement or right to pass electricity, including:

  • Installation Works means, as the context so requires,

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Type 2 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, but is not running on, such TPD; and,

  • Type 3 Installation means any Technical Installation upon which none of the SW, or only a portion of the SW, deployed is licensed for Use with such TPD, and therefore a TPD is not deployed or running.

  • Type 1 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, and is running on, such TPD;

  • Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:

  • Installation Site means the site at which the Product is originally installed.

  • Customer Equipment means hardware, software, systems, cabling and facilities provided by you and used in conjunction with the Equipment that we supply to you in order to receive the Services;

  • Existing installation means an installation, construction of which began prior to the effective date of any regulation having application to it.

  • Utility Installation means carpeting, window and wall coverings, power panels, electrical distribution systems, lighting fixtures, air conditioning, plumbing, and telephone and telecommunication wiring and equipment. At the expiration of the term, Lessor may require the removal of any or all of said alterations, improvements, additions or Utility Installations, and the restoration of the Premises and the Office Building Project to their prior condition, at Lessee's expense. Should Lessor permit Lessee to make its own alterations, improvements, additions or Utility Installations, Lessee shall use only such contractor as has been expressly approved by Lessor, and Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, or use a contractor not expressly approved by Lessor, Lessor may, at any time during the term of this Lease, require that Lessee remove any part or all of the same.

  • Installation Date means the date specified in the Statement of Work by which the Contractor must have the ordered Equipment ready (certified) for use by the State.

  • Customer Premises Equipment or "CPE" means equipment employed on the premises of a Person other than a Carrier to originate, route or terminate Telecommunications (e.g., a telephone, PBX, modem pool, etc.).

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Your Equipment means all equipment located after (downstream of) the point that electricity leaves the Meter at the premises which is used to take supply of or consume electricity except any Electricity Supply Equipment.

  • Military installation means: a base, camp, post, station, yard, center, homeport facility for any ship, or other activity under the jurisdiction of the Department of Defense, including any leased facility, which is located within any of the several States, the District of Columbia, the Commonwealth of Puerto Rico, the U.S. Virgin Islands, Guam, American Samoa, the Northern Marianas Islands and any other U.S. Territory. Such term does not include any facility used primarily for civil works, rivers and harbors projects, or flood control projects.

  • Standard Installation means the installation of drop cable to a customer’s premise where the distance from the point of entry into the building being served is less than 150 feet from the active cable television system plant.

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • Installation Services means all those services ancillary to the supply of the Plant and Equipment for the Facilities, to be provided by the Contractor under the Contract; e.g., transportation and provision of marine or other similar insurance, inspection, expediting, site preparation works (including the provision and use of Contractor’s Equipment and the supply of all construction materials required), installation, testing, pre-commissioning, commissioning, operations, maintenance, the provision of operations and maintenance manuals, training, etc.

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Communications Equipment means the communications equipment of the Licensee and its affiliates, including, without limitation, cabinets, racks, electronic equipment and other similar equipment.

  • New installation means an installation, construction of which began after the effective date of any regulation having application to it.

  • Contractor Equipment means all appliances and things of whatsoever nature (other than temporary works) required for execution and completion of works and remedying of any defects, therein. But does not include plant, materials or other things intended to form or forming part of the permanent works.

  • Permanent radiographic installation means an enclosed shielded room, cell, or vault, not located at a temporary jobsite, in which radiography is performed.