Crisis standards of care definition

Crisis standards of care means standards of care for non-conventional conditions (i.e., contingent or crisis conditions) as established in Oregon’s Crisis Care Guidance.
Sample 1Sample 2Sample 3
Crisis standards of care. At the request of the U.S. Department of Health and Human Services’ Office of the Assistant Secretary for Preparedness and Response, the Institute of Medicine convened the Committee on Guidance for Establishing Standards of Care for Use in Disaster Situations to develop guidance that State and local public health officials can use to establish and implement standards of care that should apply in disaster situations—both naturally occurring and man‐made—under scarce resource conditions. The resulting guidance is referred to as ‘Crisis Standards of Care. Responder Safety and Health HPP 14.1: Responder Safety and Health Introduction The responder safety and health capability describes the ability of healthcare organizations to protect the safety and health of healthcare workers from a variety of hazards during emergencies and disasters. Healthcare workers have increased risk for adverse exposures that result in illness and/or injury during an event. It is important that processes are in place to equip, train, and provide resources to ensure healthcare workers are adequately protected during response and recovery operations.. The goal is to assist healthcare organizations to ensure that no illnesses or injury occur to any first receiver, medical facility staff member, or other skilled support personnel as a result of preventable exposure to secondary trauma, chemical or radiological release, infectious disease, or physical and emotional stress after the initial incident or during decontamination and incident follow‐up. To integrate this capability, public health and healthcare emergency planners should coordinate how best to address public health and healthcare worker safety needs during the development of strategically placed caches of equipment, supplies and pharmaceuticals that would provide timely resource assistance. This is specifically outlined in the functions of Capability 14 from the Healthcare Preparedness Capabilities and cross‐referenced to the Public Health Preparedness Capability. Capability Functions  Assist healthcare organizations with additional pharmaceutical protection for healthcare workers  Provide assistance to healthcare organizations with access to additional Personal Protective Equipment (PPE) for healthcare workers during response Responder Safety and Health HPP 14.1: Responder Safety and Health Measure 14.1: Percent of HCCs that have systems and processes in place to preserve healthcare system functions and to protect all of the ...
Sample 1
Crisis standards of care means standards of care
Sample 1

Examples of Crisis standards of care in a sentence

  • National Academy of Medicine (2013) Crisis standards of care: A toolkit for indicators and triggers.

  • Crisis standards of care should be used only when all other avenues of resource allocation have been exhausted.

  • National Academy of Medicine (2012) Crisis standards of care: A systems framework for catastrophic disaster response.

  • Crisis standards of care procedures are available to facility administrators for decision making per state guidance found in the document titled Guidance for Ethical Allocation of Scarce Resources During a Community-Wide Public Health Emergency as Declared by the Governor of Tennessee.

  • Crisis standards of care, by definition, are unsafe and unsustainable.

  • Crisis standards of care are a new area of planning emphasis in the HPP Cooperative Agreement.

  • Crisis standards of care: a system framework for catastrophic disaster response.

  • Crisis standards of care will usually follow a formal declaration or recognition by State government during a pervasive (pandemic influenza) or catastrophic (earthquake, hurricane) disaster which recognizes that contingency surge response strategies (resource‐sparing strategies) have been exhausted, and crisis medical care must be provided for a sustained period of time.

  • Crisis standards of care situations requiring state action are extremely rare (e.g., severe pandemic) and assumes HCCs, health care facilities, and other local agencies have developed their own plans.Therefore, the CSC Framework also provides planning guidance and strategies for HCCs, health care facilities, EMS, and other local agencies to develop their own crisis standards of care plans.

  • Crisis standards of care: guidance for the ethical allocation of scarce resources during a community-wide public health emergency (2020).


More Definitions of Crisis standards of care

Crisis standards of care means a substantial change in usual health care operations and the level of care it is
Sample 1

Related to Crisis standards of care

  • Standards of Practice means the care, skill, and

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Prudent Industry Practices means, at a particular time, any of the practices, methods and acts which, in the exercise of reasonable judgment, will result in the proper operation and maintenance of the assets owned by a Party or its Affiliates and shall include, without limitation, the practices, methods and acts engaged in or approved by a significant portion of the industry at such time with respect to the assets of the same or similar types as the assets owned by such Party or its Affiliates. Prudent Industry Practices are not intended to be limited to optimum practices, methods or acts, to the exclusion of all others, but rather represent a spectrum of possible practices, methods and acts which could have been expected to accomplish the desired result at a commercially reasonable cost in a reliable, safe and timely fashion, in compliance with the applicable limited partnership agreement and limited liability company agreement and in accordance with all applicable laws. Prudent Industry Practices are intended to entail the same standards as the Parties would, in the prudent management of their own properties, use from time to time.

  • Generally accepted standards of medical practice means standards that are based upon: credible scientific evidence published in peer-reviewed medical literature and generally recognized by the relevant medical community; physician and health care provider specialty society recommendations; the views of physicians and health care providers practicing in relevant clinical areas and any other relevant factor as determined by statute(s) and/or regulation(s).

  • standards of generally recognised accounting practice means an accounting practice complying with standards applicable to municipalities or municipal entities as determined by the Accounting Standards Board

  • Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.

  • Service Standards means the set of Service Measures, Service Levels, conditions and Service Guarantee Payments as set out in Schedule 1;

  • Air Standards Manager means the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, or any other person who represents and carries out the duties of the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, as those duties relate to the conditions of this Certificate.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Privacy Standards means the standards of the privacy of individually identifiable health information, as pursuant to HIPAA.

  • Prudent Utility Practices means those practices, methods, techniques and standards, that are generally accepted for use in electric utility industries taking into account conditions in India, and commonly used in prudent electric utility engineering and operations to design, engineer, construct, test, operate and maintain equipment lawfully, safely, efficiently and economically as applicable to power stations of the size, service and type of the Project, and that generally conform to the manufacturers' operation and maintenance guidelines.

  • Community practice protocol means a written, executed agreement entered into voluntarily between an authorized pharmacist and a physician establishing drug therapy management for one or more of the pharmacist’s and physician’s patients residing in a community setting. A community practice protocol shall comply with the requirements of subrule 8.34(2).

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Uniform Standards of Professional Appraisal Practice means the current standards of the appraisal profession, developed for appraisers and users of appraisal services by the Appraisal Standards Board of the Appraisal Foundation.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • ISO-NE Practices means the ISO-NE practices and procedures for delivery and transmission of energy in effect from time to time and shall include, without limitation, applicable requirements of the NEPOOL Agreement, and any applicable successor practices and procedures.

  • Clinical practice guidelines means a systematically developed statement to assist

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Standards Board means the Professional Standards Board established pursuant to 14 Del.C. §1201.

  • Codes of Practice shall have the meaning given to the term in Clause 1.2 of Schedule 3;

  • Good Manufacturing Practices or “GMP” shall mean the then current Good Manufacturing Practices as such term is defined from time to time by the FDA or other relevant Governmental Authority having jurisdiction over the development, manufacture or sale of the Product in the Territory pursuant to its regulations, guidelines or otherwise.

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • Industry Standards means security measures that are commercially reasonable in the information technology industry and that are designed to ensure the security, integrity, and confidentiality of Accenture Data, and to protect against Security Incidents.