Corporation Stop definition

Corporation Stop means the valve threaded into the main, or the tapping saddle, and appurtenances (i.e., anything pertaining to the valve or tapping saddle) that allow you to connect the service line to the District’s main.
Corporation Stop or “corporation cock” means the valve adjoining the water main on a service connection.
Corporation Stop means a valve for joining a service pipe to a street water main. It is owned and operated by the Water Department.

Examples of Corporation Stop in a sentence

  • Corporation Stop: Corporation stops shall be three-quarter inch (3/4”) for a single service line and one and one-half inch (1 ½”) for a double service line.

  • The installation and the cost of installing the entire Water Service Line, including the Corporation Stop or mechanical joint tee, is the responsibility of the property Owner.

  • Corporation Stop components that are in contact with the water shall be of made of lead-free brass alloy (e.g. UNS C89833, C89550 or C28500).

  • Plumbers are not allowed to turn water off or on at the Corporation Stop or Stop Box valve for any water service line except to make repairs and test their work, after which they will leave it off or on as they found it, unless otherwise directed by the Company.

  • Corporation Stop shall mean a valve installed at a water main to control the flow of water in a water service connection.


More Definitions of Corporation Stop

Corporation Stop means the fitting inserted in the distribution main to which the service pipe is attached. It is used for shutting off the water in case of repairs to the service pipe.
Corporation Stop means the valve connected directly to the water main controlling the flow into the Village owner section of the water service pipe.
Corporation Stop means a water valve installed on a water service line at the point of delivery at the water main.
Corporation Stop means the valve placed on a Water Service Line at or near the junction with the Water Main.
Corporation Stop means the valve located at the service main which the Water Department alone may use to tum on or shut off service to the premises.
Corporation Stop means a device for control of water flow from the City’s water main to a water service connection.
Corporation Stop means the connection point of the 2” or smaller diameter service to the water main. Refer to Figure 3.1.