Continuous emission monitoring system or "CEMS" means the equipment required under section 11 of this rule to sample, analyze, measure, and provide, by means of readings recorded at least once every fifteen (15) minutes, using an automated data acquisition and handling system (DAHS), a permanent record of nitrogen oxides emissions, stack gas volumetric flow rate, stack gas moisture content, and oxygen or carbon dioxide concentration, as applicable, in a manner consistent with 40 CFR 75*. The following systems are the principal types of continuous emission monitoring systems required under section 11 of this rule:
Continuous emission monitoring system. (CEMS) means all equipment required to determine gaseous emission rates and to record the resulting data.
Continuous emission monitoring system or "CEMS" means the total equipment necessary for the determination of a gas or particulate matter concentration or emission rate using pollutant analyzer measurements and a conversion equation, graph, or computer program to produce results in units of the applicable emission limitation or standard.
Examples of Continuous emission monitoring system in a sentence
Continuous emission monitoring system (CEMS) means the total equipment that may be required to meet the data acquisition and availability requirements of this part, used to sample, condition (if applicable), analyze, and provide a record of emissions.
Continuous emission monitoring system (CEMS) designed to continuously record the measured gaseous concentrations, and calculate and continuously monitor and record the NOx and CO concentrations in ppmvd corrected to 15% oxygen on a dry basis.
Continuous emission monitoring system data collected during the out-of-control period may not be used for monitor availability.
Continuous emission monitoring system or CEMS means the equipment required under Subpart H of 40 CFR Part 75 to sample, analyze, measure, and provide, by readings taken at least once every 15 minutes of the measured parameters, a permanent record of nitrogen oxides emissions, expressed in tons per hour for nitrogen oxides.
The department will evaluate, on a case-by-case basis, the information submitted by the owner or operator to determine whether to pursue enforcement action.3. Continuous emission monitoring system failures.
More Definitions of Continuous emission monitoring system
Continuous emission monitoring system or "CEMS" means the equipment required under rule 3745-14-08 of the Administrative Code to sample, analyze, measure, and provide, by readings taken at least once every fifteen minutes (using an automated DAHS, a permanent record of NOx emissions, stack gas volumetric flow rate or stack gas moisture content (as applicable), in a manner consistent with rule 3745-14-08 of the Administrative Code. The following are the principal types of continuous emission monitoring systems required under rule 3745-14-08 of the Administrative Code and 40 CFR Part 75:
Continuous emission monitoring system or "CEMS" means the equipment required under rule 3745-109-07, 3745-109-13, or 3745-109-20 of the Administrative Code to sample, analyze, measure, and provide, by means of readings recorded at least once every fifteen minutes (using an automated data acquisition and handling system (DAHS), a permanent record of NOx or SO2 emissions, stack gas volumetric flow rate, stack gas moisture content, and oxygen or carbon dioxide concentration (as applicable)), in a manner consistent with 40 CFR Part 75. The following systems are the principal types of continuous emission monitoring systems required under rule 3745-109-07, 3745-109-13, or 3745-109-20 of the Administrative Code:
Continuous emission monitoring system. (CEMS) means the total equipment that may be required to meet the data acquisition and availability requirements of 40 CFR Part 63 or this regulation, used to sample, condition (if applicable), analyze, and provide a record of emissions.
Continuous emission monitoring system or "CEMS" means the equipment required under 40 CFR 75, Subpart H* to sample, analyze, measure, and provide, by means of readings taken at least once every fifteen (15) minutes using an automated data acquisition and handling system (DAHS), a permanent record of nitrogen oxides (NOx) emissions, stack gas volumetric flow rate or stack gas moisture content (as applicable), in a manner consistent with 40 CFR 75*. The following are the principal types of continuous emission monitoring systems required under section 12 of this rule:
Continuous emission monitoring system means the total equipment required for the determination of a gas concentration or emission rate. The sample interface, pollut- ant analyzer, diluent analyzer, and data re- corder are the major subsystems of the CEMS.
Continuous emission monitoring system means the total equipment, required under these Implementing Rules and Regulations or as directed by the Bureau, used to sample and condition (if applicable), analyze, and provide a permanent record of emissions or process parameters. Such record shall be the basis of the firm’s compliance with the emission standards. Further, it may be an approved monitoring system for continuously measuring the emission of a pollutant from an affected source or facility and as such, may be used in computing annual emission fees;
Continuous emission monitoring system or “CEMS” means the equipment required under 40 CFR 75, Subpart H* to sample, analyze, measure, and provide, by readings taken at least once every fifteen (15) minutes of the measured parameters, a permanent record of nitrogen oxides emissions, expressed in tons per hour for NOx. The following systems are component parts included, consistent with 40 CFR 75*, in a continuous emission monitoring system: