Compliance with standards definition

Compliance with standards. Means to comply with the standard may range from supplier declaration to evaluation by a third- party certification body. This is specified by the user of the standard, which could be a regulator. Depending on the subject area, regulations can be enacted by different levels of government. As mentioned above, for example, regulation of medical devices falls under federal jurisdiction. Most requirements for workplace safety, on the other hand, fall under provincial jurisdiction. Hence for occupational health and safety (OHS), standards may be referenced; for example, safety boots (protective footwear).
Sample 1Sample 2
Compliance with standards. Ensure that all aspects of the project comply with local and international environmental standards and best practices. • Monitoring Plan: Establish a plan for ongoing monitoring of environmental impacts during installation, to ensure adherence to environmental standards and best practices.
Sample 1

Examples of Compliance with standards in a sentence

  • Compliance with standards in this part, other than opacity standards, shall be determined in accordance with performance tests established by § 60.8, unless otherwise specified in the appli- cable standard.

  • Compliance with standards and notation of coordination requirements with other work shall be indicated.

  • Obtain Certificates of Compliance with standards and supply to the Architect on request.

  • Compliance with standards in this part, other than opacity standards, shall be determined in accordance with performance tests established by §60.8, unless otherwise specified in the applicable standard.

  • Compliance with standards and guidelines issued by industry-specific associations or similar organizations of the respective Personal Service Provider’s operations, to the extent reasonably practicable.

  • Compliance with standards contained in this chapter may not preclude the occurrence of interference.

  • You may estimatethe relative volume of coating solids used from parameters other than coatingconsumption and volume solids content( e.g., design specifications for the partsor products coated and the number of items produced).

  • Compliance with standards is determined by announced and unannounced visits to the program by licensing staff within the Department of Social Services.

  • Compliance with standards for early childhood development consistent with programs for 4-year-olds, as approved by the state board of education.

  • Compliance with standards and criteria as may be provided through revisions to the MANUAL and made subsequent to the execution of this CONTRACT shall be in accordance with Section IV.B. of these provisions.

Related to Compliance with standards

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Compliance as used in this clause, means compliance with:

  • Data Protection Requirements means all Requirements of Law, to the extent applicable to the items and services provided by the Borrower and each Restricted Subsidiary, relating to the privacy and security of information technology assets and equipment, computers, systems, networks, hardware, software, websites, applications, and databases and personal, personally identifiable, sensitive, confidential or regulated data and, in each case, to the protection thereof from unauthorized use, access, misappropriation or modification.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Export Compliance You acknowledge that Licensor’s products and/or technology are subject to the U.S. Export Administration Regulations (the “EAR”) and You agree to comply with the EAR. You will not export or re-export Licensor’s products, directly or indirectly, to: (1) any countries that are subject to US export restrictions; (2) any end user who You know or have reason to know will utilize Licensor’s products in the design, development or production of nuclear, chemical or biological weapons, or rocket systems, space launch vehicles, and sounding rockets, or unmanned air vehicle systems, except as authorized by the relevant government agency by regulation or specific license; or (3) any end user who has been prohibited from participating in the US export transactions by any federal agency of the US government. By downloading or using the Software, You are agreeing to the foregoing and You are representing and warranting that You are not located in, under the control of, or a national or resident of any such country or on any such list. In addition, You are responsible for complying with any local laws in Your jurisdiction which may impact Your right to import, export or use Licensor’s products. Please consult the Bureau of Industry and Security web page xxx.xxx.xxx.xxx before exporting items subject to the EAR. For more information on exporting Software, including the applicable Export Control Classification Number (ECCN) and associated license exception (as applicable), see xxx.xxxx.xxx/xxxxxxx/xxxxx/. Upon request, Licensor's International Trade Services Department can provide information regarding applicable export restrictions for Licensor products. Licensor assumes no responsibility for Your failure to obtain any necessary export approvals. U.S. Government Restricted Rights. Use, duplication, or disclosure of any Deliverables by the U.S. Government is subject to the restrictions in FAR 52.227-14 (Dec 2007) Alternate III (Dec 2007), FAR 52.227-19 (Dec 2007), or DFARS 252.227-7013(b)(3) (Nov 1995), or applicable successor clauses.

  • Federal safety requirements means applicable provisions of 49 U.S.C. § 30101 et seq. and all

  • Monitoring and reporting requirements means one or more of

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Program Requirements means that Partner has to fulfill certain program requirements as described in detail in the applicable SAP PartnerEdge Model and the PartnerEdge Program Guide.

  • MREL Requirements means the laws, regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities applicable to the Issuer and/or the Group, from time to time, (including any applicable transitional or grandfathering provisions), including, without limitation to the generality of the foregoing, any delegated or implementing acts (such as regulatory technical standards) adopted by the European Commission and any regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities adopted by the Federal Republic of Germany or the Republic of Italy, a relevant resolution authority or the European Banking Authority from time to time (whether or not such requirements, guidelines or policies are applied generally or specifically to the Issuer and/or the Group), as any of the preceding laws, regulations, requirements, guidelines, rules, standards, policies or interpretations may be amended, supplemented, superseded or replaced from time to time.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • OHS Requirements means all Laws applicable to the Supply and related to occupational health or safety, and all of the City Policies that relate to occupational health or safety, and includes without limitation the WCA;

  • Clean air standards, as used in this clause, means:

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Reporting Requirements As defined in Section 11.12.

  • Insurance Requirements means all terms of any insurance policy required by this Agreement and all requirements of the issuer of any such policy and all orders, rules and regulations and any other requirements of the National Board of Fire Underwriters (or any other body exercising similar functions) binding upon Landlord, Tenant or the Leased Property.

  • Safety Requirements means Prudent Electrical Practices, CPUC General Order No. 167, Contractor Safety Program Requirements, and all applicable requirements of Law, PG&E, the Utility Distribution Company, the Transmission Provider, Governmental Approvals, the CAISO, CARB, NERC and WECC.

  • Operational requirements means the need to ensure that the Agency is to be operated as effectively, efficiently and economically as possible.

  • the 2000 Regulations means the Water Supply (Water Quality) Regulations 2000(b); "the 2001 Regulations" means the Water Supply (Water Quality) Regulations 2001(c);

  • Statement of Requirements means a statement issued by the Authority or any Other Contracting Body detailing its Services Requirement issued in accordance with the Ordering Procedure;

  • Data Protection Laws and Regulations means all laws and regulations, including laws and regulations of the European Union, the European Economic Area and their member states, Switzerland and the United Kingdom, applicable to the Processing of Personal Data under the Agreement.

  • the Regulations means the Local Government: Municipal Finance Management Act, 2003, Municipal Supply Chain Management Regulations published by Government Notice 868 of 2005;

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.