Company Standards definition

Company Standards means, collectively, as of a point in time that Company Standards is being determined, each feature, policy, procedure, service, operation, parameter or other aspect of whatsoever nature of the Fund that impacts or influences in any manner BNYM’s provision of the Services or performance of an obligation, including without limitation all contents of the Fund’s Shareholder Materials.
Sample 1Sample 2Sample 3
Company Standards is hereby defined to mean any feature, policy, operation, parameter or other aspect of the Fund’s business.
Sample 1Sample 2Sample 3
Company Standards means software code and design standards including the quality assurance and testing standards;
Sample 1Sample 2

Examples of Company Standards in a sentence

  • In addition these employees shall be engaged in the inspection of aircraft materials and non-aircraft materials, parts and components, to ensure they are duly certificated` in accordance with Transport Canada and Company regulations and are in acceptable condition and meet Company Standards.

  • Pre-approves meter/service plans and inspects facilities and installations for compliance with Company Standards and Governmental Regulations.

  • Review the design capabilities of the equipment and confirm if replacement is required, and if so, that the proposed replacement equipment ratings are adequate for Company Standards and Specifications.

  • Table 107-1 Design Standards No. Agency Title 1 ADOT Guideline for Accommodating Utilities on Highway Rights-of-Way 2 ADOT Encroachment Permit (xxxx://xxxxx.xxx/business/permits/encroachment- permits) 3 Varies Utility Company Standards 4 ADOT ADOT Utility and Coordination Guide for Design Consultants 1 Developer shall perform the Utility Adjustment Work in accordance with the applicable Utility 2 Company’s standards, 23 C.F.R. 645 for Utilities, and the Contract Documents.

  • Such grooming allowance will be paid in the same manner as per diems, and shall be used for the maintenance of the Company issued uniform in adhering to the Company Standards! Where the company is contemplating a new uniform they may consult with the Union prior to the purchase of a new uniform or replacement uniform pieces as to the selection of color, style, safety, and quality of fabric.

  • Company Standards and Procedures The set of Company standards, specifications, policies and processes referred to in the draft Agreement, including any modifications to these documents that may occur from time to time.

  • The purpose of the document is to define the Sentinel Scheme Rules, Company Standards and the roles and responsibilities which are to be met by the individual and the Company as the Primary Sponsor, whilst working on the Network Rail Infrastructure This agreement sets out the consequences of breaches of the Sentinel Scheme Rules and the disciplinary measures that may be applicable.

  • To reflect the international nature of the Company, Standards and Output Documents shall be written in International English, with the exception of the Agreement, the IP Policy and this Procedure which form part of the company statutes of DDEX which is registered in the US, so US English is used.

  • Meeting Company Standards Employees will be required to meet Company standards on all occasions.

  • Contractors and subcontractors will be informed of the details and the obligation to comply with the Drug and Alcohol Company Standards during the Company’s OHS Induction.


More Definitions of Company Standards

Company Standards means the standards specified as such in Part J of Schedule 6 issued by LUL. Company's Business means the business undertaking of the Company providing infrastructure and related services to LUL in connection with LUL’s Passenger carrying railway service.
Sample 1
Company Standards. As an employee, you will be expected to adhere to the Company's standards of professionalism, loyalty, integrity, honesty, and reliability. Employment is subject to all of the policies and procedures of the Company, as amended from time to time, including but not limited to the Code of Ethics, the Ixxxxxx Xxxxxxx Policy, and the Employee Handbook, copies of which are available upon request for your review. As an executive officer of a public company, you will also be subject to compliance with all applicable federal and state securities laws.
Sample 1

Related to Company Standards

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Privacy Standards means the standards of the privacy of individually identifiable health information, as pursuant to HIPAA.

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Industry Standards means security measures that are commercially reasonable in the information technology industry and that are designed to ensure the security, integrity, and confidentiality of Accenture Data, and to protect against Security Incidents.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Technical Standards means the technical standards set out in paragraph 2.5 of the Order Form;

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • Standards Board means the Professional Standards Board established pursuant to 14 Del.C. §1201.

  • Security Standards means the final rule implementing HIPAA’s Security Standards for the Protection of Electronic PHI, as amended.

  • Petroleum Industry Standards means the Definitions for Oil and Gas Reserves promulgated by the Society of Petroleum Engineers (or any generally recognized successor) as in effect at the time in question.

  • National Standards means the document entitled “National Standards for the Volatile Organic Compound Content of Canadian Commercial/Industrial Surface Coating Products Automotive Refinishing, October 1998, PN 1288" and published by the Canadian Council of Ministers of the Environment;

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Benchmarks Regulation means Regulation (EU) 2016/1011 of the European Parliament and of the Council of 8 June 2016 on indices used as benchmarks in financial instruments and financial contracts or to measure the performance of investment funds and amending Directives 2008/48/EC and 2014/17/EU and Regulation (EU) No 596/2014;

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • Clean air standards, as used in this clause, means:

  • NYSRC Reliability Rules means the rules applicable to the operation of the New York Transmission System. These rules are based on Reliability Standards adopted by NERC and NPCC, but also include more specific and more stringent rules to reflect the particular requirements of the New York Transmission System.

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Minimum Standards means standards of practice that interpret the legal definition of nursing as well as provide criteria against which violations of the law can be determined.

  • Clean water standards, as used in this clause, means any enforceable limitation, control, condition, prohibition, standard, or other requirement promulgated under the Water Act or contained in a permit issued to a discharger by the Environmental Protection Agency or by a State under an approved program, as authorized by Section 402 of the Water Act (33 U.S.C. § 1342), or by local government to ensure compliance with pre-treatment regulations as required by Section 307 of the Water Act (33 U.S.C. § 1317).