Clear zone definition

Clear zone means the total roadside border area, starting at the edge of the traveled way, available for safe use by errant vehicles. This area may consist of a shoulder, a recoverable slope, a non-recoverable slope, and a clear run-out area. The desired width is dependent upon traffic volumes, speeds, and roadside geometry.

Clear zone means that roadside border area, starting at the edge of the traveled way, available for use by errant vehicles.

Clear zone means the total border area of a roadway or shared use path that is sufficiently wide for an errant vehicle to avoid a serious accident. (See the Subdivision Street Design Guide (24VAC30-91-160) for details.)

Examples of Clear zone in a sentence

• Combustible waste material and residues in a build- ing or unit operating area shall be kept to a minimum, stored in covered metal receptacles and disposed of daily.(iv) Clear zone.

• However, at established bases where substantial construction has taken place in accordance with a pre- vious lateral clearance criteria, the 2,000-foot width may be reduced to the former criteria.(2) Clear zone surface.

• Clear zone required for the driver at ends of on-site drive aisles and at driveway entrances, vertically between a maximum of 30 inches and a minimum of eight feet as measured from the ground level.

• Clear zone required for the driver at ends of on-site drive aisles and at driveway entrances, vertically between a maximum of 30 inches and a minimum of 8 feet as measured from the ground level.

• Clear zone and Recoverable Area information can be found in Appendix A, Section A-2 of the Road Design Manual.

More Definitions of Clear zone

Clear zone means the unobstructed relatively flat area beyond the edge of a roadway that allows a driver to stop safely or regain control of a vehicle that leaves the main traveled way.

Clear zone means the total roadside border area, starting at the edge of the traveled way, available for safe use by errant vehicles. This area may consist of a shoulder, a recoverable slope, a non-recoverable slope, and/or a clear run-out area. The desired minimum width is dependent upon traffic volumes and speeds and on the roadside geometry. Simply stated, it is an unobstructed, relatively flat area beyond the edge of the traveled way that allows a driver to stop safely or regain control of a vehicle that leaves the traveled way. The INDOT Design Manual, available at xxxx://xxx.xx.xxx/indot/design_manual/, is the guide for establishing the clear zone for various types of highways and operating conditions.

Clear zone. – means the total roadside border area, starting at the edge of the pavement, available for safe use by errant vehicles. This area may consist of a shoulder, a recoverable slope, a non-recoverable slope, and a clear run-out area. The desired width is dependent upon the traffic volumes and speeds, and on the roadside geometry. Distances are specified in the AASHTO Roadside Design Guide.

Clear zone means the total roadside border area, starting at the edge of the traveled way, available for safe use by errant vehicles. This area may consist of a shoulder, a recoverable slope, a nonrecoverable slope, and/or a clear run out area. The desired width is dependent upon the traffic volumes and speeds and on the roadside geometry, as defined in the American Association of State Highway and Transportation Officials “Roadside Design Guide” incorporated below at § 4.4(H) of this Part.

Clear zone means the total border area of a roadway including, if any, parking lanes or planting strips that is sufficiently wide for an errant vehicle to avoid a serious accident. (See the Road Design Manual and the Subdivision Street Design Guide (see 24VAC30-92-150) for details.)

Clear zone means the total roadside border area, starting at the edge of the traveled way, available for safe use by errant vehicles. The desired width is dependent upon the traffic volumes and speeds and on the roadside geometry as referenced in the AASHTO Roadside Design Guide.

Clear zone means the unobstructed, relatively flat area provided beyond the edge of the traveled way for the recovery of errant vehicles. The width of the clear zone is determined by the type of facility, traffic volume, speed, horizontal alignment and embankment and is detailed in VDOT's Road Design Manual [ (revised January 2005) ] (see 24VAC30-151-760 [ for document information ]).