Clean closure definition

Clean closure means implementation of all actions specified in
Sample 1Sample 2Sample 3
Clean closure at a solid waste facility means a site which satisfies all of the following:
Sample 1Sample 2
Clean closure means implementation of all actions specified in an aquifer protection permit, if any, as closure requirements, as well as elimination, to the greatest degree practicable, of any reasonable probability of further discharge from the facility and of either exceeding aquifer water quality standards at the applicable point of compliance or, if an aquifer water quality standard is exceeded at the time the permit is issued, causing further degradation of the aquifer at the applicable point of compliance as provided in section 49-243, subsection B, paragraph 3. Clean closure also means postclosure monitoring and maintenance are unnecessary to meet the requirements in an aquifer protection permit.
Sample 1Sample 2Sample 3

Examples of Clean closure in a sentence

  • Clean closure means the removal or remediation of all hazardous waste from a given RCRA-regulated unit so that further regulatory control under RCRA Subtitle C is not necessary to protect human health and the environment.

  • Clean closure of the tank farms would involve removal of all tanks, associated ancillary equipment, and contaminated soil to a depth of 3 meters (10 feet) directly beneath the tank base.

  • Clean closure of a Waste Management Unit (as defined in Risk-Based Clean Closure, EPA 1998) may be accomplished if: (1) all waste, waste residues, and containment system components have been removed from the Waste Management Unit; (2) the residual constituent concentrations in environmental media are less than or equal to the applicable SS, MO-1 RS, MO-2 RS, or MO-3 RS; and (3) the residual constituent concentrations in environmental media do not pose an unacceptable risk to ecological receptors.

  • Clean closure of a facility not covered by an Aquifer Protection Permit .1.

  • Clean closure (or partial clean closure) of areas where one or more of the above measures are not feasible or are ineffective to comply with Title 27 standards for a Class III landfill.See Findings 50, 51, 54, 63, 64 and 86; and Section J, Response to Release, Industrial SPRRs.

  • Clean closure was achieved for Building 1 and its contents (no hazardous waste or constituents associated with Building 1 were detected in the underlying soil or groundwater).

  • Clean closure of the SST system would preclude the need for postclosure care.

  • Clean closure of the SST system would preclude the need for post-closure care.

  • For example, Sandie Holguín shows that in Spain the Franco regime deliberately “prolonged its civil war” to maintain power until 1975; this was followed after Franco’s death by a deliberate “Pact of Forgetting” (Pacto de Olvido) among Spanish politicians of all stripes.21 Clean closure also eluded peacemakers in sub-­‐Saharan Africa and will likely also not come for Afghanistan.

  • Clean closure of the cribs and trenches (ditches) is analyzed in the cumulative impacts analysis sections of this EIS.


More Definitions of Clean closure

Clean closure means implementation of all actions specified in a permit, if any, as closure requirements, as well as elimination, to the greatest degree practicable, of any reasonable probability of further discharge from the facility and of exceeding aquifer water quality standards at the applicable point of compliance. Clean closure also means postclosure monitoring and maintenance are unnecessary to meet the requirements of this chapter.
Sample 1
Clean closure means complete removal of all waste from the facility and removal or decontamination of all structures, equipment, debris and environmental media (such as soil and ground water). If that cannot be accomplished consistent with the performance standards for “clean closure” in WAC 173-303- 610(2), then the closure plan and/or the final permit must have requirements for additional post-closure care or corrective action.
Sample 1
Clean closure means achieving the general and technical closure performance standards by removing hazardous waste from the facility or HWMU and then decontaminating (i.e., contaminants from permitted-operations) the facility or HWMU such that no post-closure care is required. The TOCDF facility, including all of its HWMUs will be RCRA “clean- closed” to residential standards in accordance with this plan (i.e. risk-based residential closure).
Sample 1

Related to Clean closure

  • Solid Waste Management Unit , or “SWMU” means any discernible unit at which solid wastes have been placed at any time, irrespective of whether the unit was intended for the management of solid or hazardous wastes. Such units include any area at a facility at which solid wastes have been routinely or systematically released.

  • Virginia Stormwater Management Act means Article 2.3 (§ 62.1-44.15:24 et seq.) of Chapter 3.1 of Title 62.1 of the Code of Virginia.

  • Yard waste means leaves, grass clippings, yard and garden debris and brush, including clean woody vegetative material no greater than 6 inches in diameter. This term does not include stumps, roots or shrubs with intact root balls.

  • Waste Framework Directive or “WFD” means Waste Framework Directive 2008/98/EC of the European Parliament and of the Council on waste

  • Demolition waste means that solid waste that is produced by the destruction of structures, or their foundations, or both, and includes the same materials as construction waste.

  • Waste prevention means source reduction and reuse, but not recycling.

  • Public transportation means that term as defined in section 10c of Act No. 51 of the Public Acts of 1951, being section 247.660c of the Michigan Compiled Laws.

  • Safety Management System means a systematic approach to managing safety, including the necessary organisational structures, accountabilities, policies and procedures;

  • Solid waste management means the purposeful and systematic collection, transportation, storage, processing, recovery, or disposal of solid waste.

  • Air transportation means the public carriage by aircraft of passengers, baggage, cargo, and mail, separately or in combination, for remuneration or hire;

  • Stormwater Pollution Prevention Plan or "SWPPP" means a document that is prepared in accordance with good engineering practices and that identifies potential sources of pollutants that may reasonably be expected to affect the quality of stormwater discharges from the construction site, and otherwise meets the requirements of this Ordinance. In addition the document shall identify and require the implementation of control measures, and shall include, but not be limited to the inclusion of, or the incorporation by reference of, an approved erosion and sediment control plan, an approved stormwater management plan, and a pollution prevention plan.

  • Transportation Company means any organization which provides its own or its leased vehicles for transportation or which provides freight forwarding or air express services.

  • air transport means the carriage by aircraft of passengers, baggage, cargo, and mail, separately or in combination, held out to the public for remuneration or hire, including scheduled and non-scheduled air services;

  • Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.

  • Solid Waste Disposal Site means, as defined in NCGS 130A-290(a)(36), any place at which solid wastes are disposed of by incineration, sanitary landfill, or any other method.

  • Municipal solid waste landfill or “MSW landfill” means an entire disposal facility in a contiguous geographical space where household waste is placed in or on land. An MSW landfill may also receive other types of RCRA Subtitle D wastes such as commercial solid waste, nonhazardous sludge, and industrial solid waste. Portions of an MSW landfill may be separated by access roads. An MSW landfill may be publicly or privately owned. An MSW landfill may be a new MSW landfill, an existing MSW landfill or a lateral expansion.