Class I product definition

Class I product means a complete aircraft, aircraft engine or propeller, which –
Sample 1Sample 2Sample 3
Class I product means a complete aircraft, aircraft engine, RPS, or a propeller, which has been type certificated or is identical to a product type certificated in accordance with the provisions of these regulations;”; (h) the insertion after the definition of “cloud ceiling” of the following definition:
Sample 1Sample 2
Class I product means: A DNA construct which is, or is intended to be, used to alter a mammalian cell so that said mammalian cell (i) carries a genetic modification resulting from the insertion of the said DNA construct targeted to a predetermined, specific chromosomal location without the intent to alter the function or expression of the gene(s) at the site of the targeted chromosomal location; and
Sample 1Sample 2

Examples of Class I product in a sentence

  • The luminaries offered shall conform to Level-1 classification, solidly grounded Class I product for Earthing.

  • A Class II product is a major component of a Class I product (e.g., wings, fuselages, empennage assemblies, landing gears, power transmissions, control surfaces, etc), the failure of which would jeopardize the safety of a Class I product; or any part, material, or appliance, approved and manufactured under the Technical Standard Order (TSO) system in the “C” series.

  • An appropriately Approved Maintenance Organization (AMO) having adequate overhaul facilities, and maintenance organization appropriate to the product involved, when the product is a Class I product located in a foreign country and has the approval by the Authority.

  • While this is a Class I product, provided with a protective earthing conductor in a power cord, an external protective earthing terminal has also been provided.

  • Parts are eligible for installation on : Make and model of Class I product : ________________________ Spec.

  • A person must apply for an export certificate of airworthiness for a Class I product that is a complete aircraft in the way set out in this regulation.

  • An appropriately certificated for- eign repair station having adequate overhaul facilities, and maintenance organization appropriate to the prod- uct involved, when the product is a Class I product located in a foreign country and an international office of Flight Standards Service has approved the use of such foreign repair station.

  • A Class II product is a major com- ponent of a Class I product (e.g., wings, fuselages, empennage assemblies, land- ing gears, power transmissions, control surfaces, etc), the failure of which would jeopardize the safety of a Class I product; or any part, material, or ap- pliance, approved and manufactured 14 CFR Ch. I (1–1–10 Edition)under the Technical Standard Order (TSO) system in the ‘‘C’’ series.

  • Each selected orchestra will be informed by e-mail or post.The selected orchestra will then fill and send back before January 31st 2019 the form “Additional Information” to the following address :Pascal ZAUG, Président du Festival International CLUB DES MANDOLINES16 route d’HérivalF-88200 REMIREMONTmailto:festivalremiremont2019@gmail.com The registration will be taken into account after reception of the 150€ registration fee (to the order of Club des Mandolines de Remiremont).

  • We have a very strong high purity nickel, Class I product base which comes in many different forms and can feed many different applications.


More Definitions of Class I product

Class I product means: A DNA construct which is, or is intended to be, used to alter a mammalian cell so that said mammalian cell (i) carries a genetic modification resulting from the insertion of the said DNA construct targeted to a predetermined, specific chromosomal location without the intent to alter the function or expression of the gene(s) at the site of the targeted chromosomal location; and (ii) is or is intended to be used to create a line of mammalian animals (the “Class I Animals”). For clarity, Class I Product includes the said DNA construct (the “Class I Construct”), the said altered mammalian cell (the “Class I Cell”) and the said altered mammalian animal line. Class I Product only includes the insertion of DNA sequences that are not intended to (a) alter the function or expression of the gene(s) at the site of the targeted chromosomal location, or (b) have a phenotypic impact on the said altered mammalian animal line. Examples of DNA sequences which can be inserted in ways that would not alter the function or expression of the gene(s) at the site of the targeted chromosomal location and thus would be expected not to have a phenotypic impact, are those encoding reporter proteins such as GFP or lacZ, cell surface markers, protein tags or trans-acting utility proteins, such as recombinases including Cre and FLP recombinases, but do not include libraries of cDNAs to be screened for phenotypic effects of their misexpression. For clarity, a Class I product is commonly known as “conditional knock-out”, “reporter strain”, “cell-surface marker”, “protein tagging”, “transacting utility protein” (such as Cre, Flp, or Fre Recombinase).
Sample 1
Class I product means a complete aircraft, aircraft engine, RPS, or a propeller, which has been type certificated or is identical to a product type certificated in accordance with the provisions of these regulations;”;
Sample 1

Related to Class I product

  • Anti-Static Product means a product that is labeled to eliminate, prevent, or inhibit the accumulation of static electricity. “Anti-Static Product” does not include “Electronic Cleaner,” “Floor Polish or Wax,” “Floor Coating,” and products that meet the definition of “Aerosol Coating Product” or “Architectural Coating.”

  • Licensed Product means any method, process, composition, product, service, or component part thereof that would, but for the granting of the rights set forth in this Agreement, infringe a Valid Claim contained in the Licensed Patents.

  • Hemp product means the same as that term is defined in § 3.2-4112.

  • Drug Product means a specific drug in dosage form from a known source of manufacture, whether

  • Diagnostic Product means In Vitro Diagnostics, In Vivo Diagnostic Agents and any product used for Diagnosis.

  • Tobacco product means any substance containing tobacco leaf, including but not limited to, cigarettes, cigars, pipe tobacco, hookah tobacco, snuff, chewing tobacco, dipping tobacco, bidis, blunts, clove cigarettes, or any other preparation of tobacco; and any product or formulation of matter containing biologically active amounts of nicotine that is manufactured, sold, offered for sale, or otherwise distributed with the expectation that the product or matter will be introduced into the human body by inhalation; but does not include any cessation product specifically approved by the U.S. Food and Drug Administration for use in treating nicotine or tobacco dependence.

  • Collaboration Product means a pharmaceutical product containing or comprising Compound in any dosage form alone, or in combination with, one or more other pharmaceutically active ingredients, and any and all Improvements thereto.

  • Combination Product means (a) a product containing a Licensed Product together with one or more other active ingredients that have independent biologic or chemical activity when present alone that are sold as a single unit, or (b) a Licensed Product together with one or more products, devices, pieces of equipment or components thereof, that are sold as a single package at a single price.

  • Milk product or "dairy product" means cottage cheese, dry curd cottage cheese, reduced fat cottage cheese, lowfat cottage cheese, cream, light cream, light whipping cream, heavy cream, heavy whipping cream, whipped cream, whipped light cream, sour cream, acidified sour cream, cultured sour cream, half-and-half, sour half-and-half, acidified sour half-and-half, cultured sour half-and-half, reconstituted or recombined milk and milk products, concentrated milk, concentrated milk products, skim milk, lowfat milk, frozen milk concentrate, flavored milk, eggnog, buttermilk, cultured milk, cultured lowfat milk, cultured skim milk, yogurt, lowfat yogurt, nonfat yogurt, acidified milk, acidified lowfat milk, acidified skim milk, low-sodium milk, low-sodium lowfat milk, low-sodium skim milk, lactose-reduced milk, lactose-reduced lowfat milk, lactose-reduced skim milk, aseptically processed and packaged milk, milk products with added safe and suitable microbial organisms, and any other milk product made by the addition or subtraction of milkfat or addition of safe and suitable optional ingredients for protein, vitamin, or mineral fortification. Unless a product is considered a milk product under this subdivision, milk product does not include dietary products, infant formula, ice cream or other desserts, cheese, or butter. Milk products include the following:

  • Bundled Product means Product sold together with any other product(s) or service(s) at a single unit price, whether packaged together or separately, and which other product(s) or service(s) have material independent value from Product itself.

  • Marihuana-infused product means a topical formulation, tincture, beverage, edible substance, or similar product containing marihuana and other ingredients and that is intended for human consumption.

  • Recycled product means a product containing recovered material, or post-consumer recovered material, or both.

  • Licensed Compound means (a) 3,4-Diaminopyridine, the chemical structure of which is set forth on Exhibit B-2; and (b) any derivatives, isomers, metabolites, prodrugs, acid forms, base forms, salt forms, or modified versions of such compound in (a).

  • Generic Product means a product which (a) contains as its active pharmaceutical ingredient a compound that is (or is substantially the same as) the Licensed Compound or the active pharmaceutical contained in a Unity Bcl-2 [***] Product, and (b) has been placed on the market pursuant to a validly granted marketing authorization.

  • Reference biological product means the single biological product licensed pursuant to 42 U.S.C.

  • Biological product means a virus, therapeutic serum, toxin, antitoxin, vaccine, blood, blood component or derivative, allergenic product, protein other than a chemically synthesized polypeptide, or analogous product, or arsphenamine or any derivative of arsphenamine or any other trivalent organic arsenic compound, applicable to the prevention, treatment, or cure of a disease or condition of human beings.

  • Class D Component The Component having such designation.

  • New Product means the Synology-branded hardware product and Synology-branded accessories contained in the original packaging Customer bought from an authorized Synology distributor or reseller. You may see our “New Product” at Product Support Status.

  • Interchangeable biological product means a biological product that the U.S. Food and Drug Administration has:

  • Edible cannabis product means cannabis product that is intended to be used, in whole or in part, for human consumption, including, but not limited to, chewing gum, but excluding products set forth in Division 15 (commencing with Section 32501) of the Food and Agricultural Code. An edible cannabis product is not considered food, as defined by Section 109935 of the Health and Safety Code, or a drug, as defined by Section 109925 of the Health and Safety Code.

  • Roll-on product means any antiperspirant or deodorant that dispenses active ingredients by rolling a wetted ball or wetted cylinder on the affected area.

  • Clinical Trial means a Phase I Clinical Trial, Phase II Clinical Trial or Phase III Clinical Trial, or any post-approval human clinical trial, as applicable.

  • Class C Component The Component having such designation.

  • Mercury-added product means a product or product component that contains mercury or a mercury compound that was intentionally added;