Assigned Components definition

Assigned Components means the components or materials specifically identified in Schedule 1 as “assigned” and for which iRobot has identified the applicable supplier from whom Kin Yat is authorized to source such component or material for incorporation into the Product.
Sample 1Sample 2Sample 3
Assigned Components has the meaning specified in Section 2.1(a)(iv).
Sample 1Sample 2
Assigned Components means the components or materials specifically identified in Schedule 1 as “assigned” and for which Company has identified the applicable supplier from whom Jabil is authorized to source such component or material for incorporation into the Product. 1.5 “AVL” means the confidential list of Suppliers Designated by Company from which Jabil is authorized to purchase the applicable Assigned Components and Generic Components for use in the manufacture of Products. 1.6 “Business Continuity Plan” shall have the meaning set forth in Section 21.1. 1.7 “Class Failure” means a defect solely caused by (i) Jabil’s failure to manufacture any Product to conform to the Specifications or other requirements in this Agreement, (ii) the failure of Jabil to comply with any applicable law, rule, regulation, court order or decree that is applicable to Jabil’s performance of its obligations set forth in this Agreement, or (iii) the gross negligence or willful misconduct of Jabil’s personnel performing Manufacturing Services for Company under this Agreement; wherein, such defect occurs in [*] or more of the total Portions of this Exhibit were omitted and have been filed separately with the Secretary of the Commission pursuant to the Company’s application requesting confidential treatment under Rule 24b-2 of the Exchange Act — [*] denotes omissions.
Sample 1

Examples of Assigned Components in a sentence

  • Kin Yat shall use Commercially Reasonable Efforts to ensure that all Assigned Components used in the Product are procured from suppliers on the AVL, unless otherwise agreed to by the Parties in writing.

  • Kin Yat shall be responsible for qualifying all subcontractors of all Assigned Components and Generic Components pursuant to Kin Yat’s existing qualification methodology and process.

  • In such case, Jabil shall source such Assigned Components from the applicable supplier and implement supply optimization inventory practices.

  • Jabil shall use Commercially Reasonable Efforts to ensure that all Assigned Components used in the Product are procured from suppliers on the AVL, unless otherwise agreed to by the Parties in writing.

  • Jabil will be responsible for managing the pipeline of all Assigned Components, Generic Components, and any Consigned Components controlled by Jabil to the extent empowered by Company through its Material Authorizations and Purchase Orders.

  • With Company’s prior written consent (such as a Material Authorization), Jabil may pre-purchase Generic Components and Assigned Components, or pre-build sub assemblies, modules, core robots or even completed SKU quantities in order to meet Forecast volumes, or anticipated volumes under Purchase Orders and Material Authorizations.

  • Kin Yat is responsible for managing, and the performance of, the suppliers of the Assigned Components and Generic Components, including but not limited to purchasing, component inventory control, customs paperwork and Value Added Tax (VAT), and is ultimately responsible for verifying that all Components conform to the Product Specifications.

  • With respect to any Assigned Components or Consigned Components (controlled by Kin Yat) that have been customized by a supplier or manufacturer specifically for any iRobot Product, Kin Yat shall require each such supplier not to sell or supply such custom Component to any other Person.

  • Company may authorize Jabil to procure Generic Components and Assigned Components necessary, without a Purchase Order, by issuing a written authorization to purchase such Components (“Material Authorization”), to meet specific Forecast or Purchase Order demand as well as any coverage which may be needed for NCNR and Long-Lead Components.

  • Kin Yat will be responsible for managing the pipeline of all Assigned Components, Generic Components, and any Consigned Components controlled by Kin Yat.


More Definitions of Assigned Components

Assigned Components means the components or materials specifically identified in Schedule 1 as “assigned” and for which Company has identified the applicable supplier from whom Jabil is authorized to source such component or material for incorporation into the Product. Portions of this Exhibit were omitted and have been filed separately with the Secretary of the Commission pursuant to the Company’s application requesting confidential treatment under Rule 24b‑2 of the Exchange Act — [*] denotes omissions.
Sample 1
Assigned Components means the components or materials specifically identified in Schedule 1 as “assigned” and for which Company has identified the applicable supplier from whom Jabil is authorized to source such component or material for incorporation into the Product. 1.5 “AVL” means the confidential list of Suppliers Designated by Company from which Jabil is authorized to purchase the applicable Assigned Components and Generic Components for use in the manufacture of Products. 1.6 “Business Continuity Plan” shall have the meaning set forth in Section 21.1. 1.7 “Class Failure” means a defect solely caused by (i) Jabil’s failure to manufacture any Product to conform to the Specifications or other requirements in this Agreement, (ii) the failure of Jabil to comply with any applicable law, rule, regulation, court order or decree that is applicable to Jabil’s performance of its obligations set forth in this Agreement, or (iii) the gross negligence or willful misconduct of Jabil’s personnel performing Manufacturing Services for Company under this Agreement; wherein, such defect occurs in [*] or more of the total Portions of this Exhibit were omitted and have been filed separately with the Secretary of the Commission pursuant to the Company’s application requesting confidential treatment under Rule 24b-2 of the Exchange Act — [*] denotes omissions.
Sample 1

Related to Assigned Components

  • Third Party Components means software and interfaces, licensed by RIM from a third party for incorporation into a RIM software product, or for incorporation into firmware in the case of RIM hardware products, and distributed as an integral part of that RIM product under a RIM brand, but shall not include Third Party Software.

  • Removed Components means components of the Project or portions thereof which the Company or any Sponsor Affiliate in its sole discretion, elects to remove from the Project pursuant to Section 4.04 hereof or as a result of any Condemnation Event.

  • Manufacturing Site means a location where a manufacturing

  • Biological Samples means any physical samples obtained from Study Participants in accordance with the Protocol for the purposes of the Study.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • complex product means a product which is composed of multiple components which can be replaced permitting disassembly and re-assembly of the product.

  • Licensed Compounds means any EZH2 Compound(s) that is:

  • Drug Substance means an active ingredient that is intended to furnish pharmacological activity or other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease or to affect the structure or any function of the human body, but does not include intermediates used in the synthesis of such ingredient.

  • Accelerator-produced material means any material made radioactive by a particle accelerator.

  • Certified components means components of X-ray systems which are subject to regulations promulgated under Public Law 90-602, the “Radiation Control for Health and Safety Act of 1968,” the Food and Drug Administration.

  • Product Family means an SAP product family which may comprise of one or several SAP software products or services as further set out in the applicable RSPI.

  • Covered Products means Your Applications, Libraries, Passes, Safari Extensions, Safari Push Notifications, and/or FPS implementations developed under this Agreement.

  • Components means articles, materials, and supplies incorporated directly into end products at any level of manufacture, fabrication, or assembly by the Contractor or any subcontractor.

  • Cannabis product means cannabis that has undergone a process whereby the plant material has been transformed into a concentrate, including, but not limited to, concentrated cannabis, or an edible or topical product containing cannabis or concentrated cannabis and other ingredients.

  • Combination Products means any product containing both a pharmaceutically active agent or ingredient which constitutes a Licensed Product and one or more other pharmaceutically active agents or ingredients which do not constitute Licensed Products.

  • Open-Source Components means any software component that is subject to any open-source copyright license agreement, including any GNU General Public License or GNU Library or Lesser Public License, or other obligation, restriction or license agreement that substantially conforms to the Open Source Definition as prescribed by the Open Source Initiative or otherwise may require disclosure or licensing to any third party of any source code with which such software component is used or compiled.

  • Combination Product means (a) a product containing a Licensed Product together with one or more other active ingredients that have independent biologic or chemical activity when present alone that are sold as a single unit, or (b) a Licensed Product together with one or more products, devices, pieces of equipment or components thereof, that are sold as a single package at a single price.

  • Licensed Compound means (a) 3,4-Diaminopyridine, the chemical structure of which is set forth on Exhibit B-2; and (b) any derivatives, isomers, metabolites, prodrugs, acid forms, base forms, salt forms, or modified versions of such compound in (a).

  • Milk product or "dairy product" means cottage cheese, dry curd cottage cheese, reduced fat cottage cheese, lowfat cottage cheese, cream, light cream, light whipping cream, heavy cream, heavy whipping cream, whipped cream, whipped light cream, sour cream, acidified sour cream, cultured sour cream, half-and-half, sour half-and-half, acidified sour half-and-half, cultured sour half-and-half, reconstituted or recombined milk and milk products, concentrated milk, concentrated milk products, skim milk, lowfat milk, frozen milk concentrate, flavored milk, eggnog, buttermilk, cultured milk, cultured lowfat milk, cultured skim milk, yogurt, lowfat yogurt, nonfat yogurt, acidified milk, acidified lowfat milk, acidified skim milk, low-sodium milk, low-sodium lowfat milk, low-sodium skim milk, lactose-reduced milk, lactose-reduced lowfat milk, lactose-reduced skim milk, aseptically processed and packaged milk, milk products with added safe and suitable microbial organisms, and any other milk product made by the addition or subtraction of milkfat or addition of safe and suitable optional ingredients for protein, vitamin, or mineral fortification. Unless a product is considered a milk product under this subdivision, milk product does not include dietary products, infant formula, ice cream or other desserts, cheese, or butter. Milk products include the following:

  • Cannabis products means cannabis that has undergone a process whereby the plant material has been transformed into a concentrate, including, but not limited to, concentrated cannabis, or an edible or topical product containing cannabis or concentrated cannabis and other ingredients.

  • Reference biological product means the single biological product licensed pursuant to 42 U.S.C.

  • Blood component means that part of blood separated by physical or mechanical means.

  • Manufacturing Technology means any and all patents, patent applications, Know-How, and all intellectual property rights associated therewith, and including all tangible embodiments thereof, that are necessary or useful for the manufacture of adeno- associated viruses, adeno-associated virus vectors, research or commercial reagents related thereto, Licensed Products, or other products, including manufacturing processes, technical information relating to the methods of manufacture, protocols, standard operating procedures, batch records, assays, formulations, quality control data, specifications, scale up, any and all improvements, modifications, and changes thereto, and any and all activities associated with such manufacture. Any and all chemistry, manufacturing, and controls (CMC), drug master files (DMFs), or similar materials provided to regulatory authorities and the information contained therein are deemed Manufacturing Technology.

  • Edible cannabis product means cannabis product that is intended to be used, in whole or in part, for human consumption, including, but not limited to, chewing gum, but excluding products set forth in Division 15 (commencing with Section 32501) of the Food and Agricultural Code. An edible cannabis product is not considered food, as defined by Section 109935 of the Health and Safety Code, or a drug, as defined by Section 109925 of the Health and Safety Code.

  • Bioassay means the determination of kinds, quantities or concentrations and, in some cases, the locations of radioactive material in the human body, whether by direct measurement, in vivo counting, or by analysis and evaluation of materials excreted or removed from the human body. For purposes of these rules, “radiobioassay” is an equivalent term.

  • Cost of materials means the cost of components, parts or materials which are intended for the production, manufacturing or assembling of the goods bid for and which are not produced, manufactured or assembled in the factory where the production, manufacture or assembly of such goods occurs, including freight, landing costs, port charges, import duties and other import costs of such components, parts or materials and all costs in connection with the handling and transport thereof prior to delivery at that factory;