Applicable Remediation Standards definition

Applicable Remediation Standards means all applicable clean up, remedial, corrective or similar standards promulgated by or acceptable to any Governmental Entities having jurisdiction over any such matter, based upon use of the affected facility or property for industrial and commercial use, that satisfy the requirements of all such Governmental Entities and applicable Environmental Laws.
Sample 1Sample 2
Applicable Remediation Standards means the least restrictive standards allowed consistent with a cost-effective remedy with respect to any Environmental Condition (including any applicable cleanup standards for industrial areas promulgated by the Governmental Authorities having jurisdiction over such matter and/or site-specific risk-based cleanup standards, based upon future use of the affected Facility for industrial and commercial use and the use of institutional and engineering controls as provided under Section 9.7(b)(iv)) which satisfy the publicly promulgated requirements of Environmental Law and such Governmental Authorities with respect to the satisfactory completion of Remedial Action with respect to such Environmental Condition. If no such publicly promulgated requirements exist, the Lead Party shall propose to the Non-Lead Party standards to serve as the Applicable Remediation Standards, subject to the Non-Lead Party’s approval which approval shall not be unreasonably withheld, delayed or conditioned; provided, that selection of the Applicable Remediation Standards applicable to the Canoga Park Leased Premises and the PWRWB Leased Premises shall be governed by the Canoga Park Lease and PWRWB Lease, respectively.
Sample 1Sample 2
Applicable Remediation Standards means the standards allowed consistent with a cost-effective remedy with respect to any Environmental Condition which satisfy the publicly promulgated requirements of Environmental Law and as promulgated or negotiated with the applicable Governmental Authorities with respect to the satisfactory completion of Remedial Action with respect to such Environmental Condition. The Lead Party shall ensure that all Remedial Action and other remediation and compliance activities are performed up to but not beyond general standards applicable to industrial uses and applicable law, making full use, where appropriate, of engineering, institutional, or other controls and risk-based corrective action. Although the Lead Party may elect to take additional Remedial Action, if it elects to do so, it shall be at the sole expense of the Lead Party. The Lead Party shall propose, and the Non-Lead Party shall cooperate so as to implement deed restrictions, engineering and other institutional controls, and risk-based corrective action to satisfy the respective Parties’ obligations regarding any Environmental Conditions or Remedial Action, provided that such deed restrictions, engineering and other institutional controls do not materially limit or materially increase the cost of the Non-Lead Party’s ongoing and future operations or materially limit the Non-Lead Party’s ability to expand industrial or commercial operations or sell such the Leased Premises or the Property for industrial or commercial use in the future.
Sample 1Sample 2

Examples of Applicable Remediation Standards in a sentence

  • If the Checklist to Determine Applicable Remediation Standards shows that ecological receptors may be exposed to potential harm from the site, the COPCs should be screened first against the USEPA Region 3 Biological Technical Assistance Group (BTAG) values for the appropriate media (e.g., surface water or sediment samples).

  • Any Remedial Actions conducted at the Business Real Property by any Lead Party shall be conducted in a cost-effective manner using commercially reasonable methods for investigations, corrective action, remediation and containment to achieve (1) the least stringent available Applicable Remediation Standards, or (2) such other Applicable Remediation Standards as agreed to by the parties.

  • Effectiveness and Reliability of Attaining the Applicable Remediation Standards This approach will effectively and reliably achieve immediate compliance with the applicable remediation standards through the physical removal of the contaminated water and backfill from the UST Excavation Area.

  • If a Closure Document is not available or achievable from any Governmental Entity for any such Remedial Action, then the Sellers’ indemnity obligation shall include securing a certification from a reputable third party consultant, for reliance by Purchaser and subject to Purchaser’s reasonable approval, that all required Remedial Actions have attained Applicable Remediation Standards consistent with the provisions of Section 10.6(b).

  • The State Treasurer may approve requests for new accounts and services that meet the minimum requirements of this policy; provided that, the State Treasurer shall notify the board of the approval of any new account or any significant change in services.

  • This diagram should be used together with Attachment 5 – Checklist to Determine Applicable Remediation Standards.

  • Site eligibility for using the De Minimis Standards is determined by responses to Attachment 5 – Checklist to Determine Applicable Remediation Standards of this guidance manual.

  • Site eligibility for using the De Minimis Standards is determined by responses to Attachment 2 – Checklist to Determine Applicable Remediation Standards of this guidance manual.

  • The cost is further presented later in this section.Primary Assumptions for Selected Groundwater Approach DurationSampling FrequencyNo. of Wells per Sampling EventInstitutional Control Reviews 20 yearsQuarterly – 2 years Semi-Annually – 3 yearsAnnually – 15 years Effectiveness and Reliability of Attaining the Applicable Remediation Standards The Institutional Controls/CEA Remedial Approach relies only on natural attenuation processes to degrade the contaminants.

  • This diagram should be used together with Attachment 2 – Checklist to Determine Applicable Remediation Standards.


More Definitions of Applicable Remediation Standards

Applicable Remediation Standards means standards which are the minimum standards required under Environmental Laws and applicable to the industrial use and operations at the respective Indemnified Sites as carried out at Closing and, in relation to any Asbestos Condition, shall mean the minimum Asbestos Remediation Works which are required and necessary (A) to comply with a mandatory order served by a competent regulatory authority acting lawfully under and in accordance with Asbestos Laws requiring the undertaking of Asbestos Remediation Works in respect of an Asbestos Condition, or (B) to satisfy the minimum requirements of Asbestos Laws in respect of an Asbestos Condition.
Sample 1Sample 2
Applicable Remediation Standards means the least restrictive standards allowed consistent with the most cost-effective, technically feasible remedy with respect to any Environmental Condition (including any applicable cleanup standards for industrial areas promulgated by the Governmental Entities having jurisdiction over such matter and/or site-specific risk-based cleanup standards, based upon future use of the affected property for industrial use and the use of institutional and engineering controls as provided under Section (g) of Schedule 6.1B) which satisfy the requirements of Environmental Law and applicable Governmental Entities with respect to the required completion of Remedial Action with respect to such Environmental Condition. “Assumed Liabilities” means solely the following liabilities and obligations, other than the Excluded Liabilities: (a) all liabilities and obligations of Seller 1 (1) reflected as liabilities in the Balance Sheet (other than deferred Taxes, liabilities and obligations to Affiliates of either Seller and liabilities under Seller 1’s Supplemental Executive Investment Plan), to the extent not discharged as of the Closing and limited to the amounts thereof as of the Closing, or (2) reflected in the calculation of Actual Net Working Capital; (b) all liabilities and obligations arising before, on or after the Closing Date from or in connection with all Contracts included in the Acquired Assets (but not arising from a breach occurring before the Closing Date or from a Claim for liquidated damages arising from any event occurring before the Closing Date); (c) all liabilities, obligations, easements and rights of way arising before, on or after the Closing Date from or in connection with the ownership of the Transferred Real Property, except for such liabilities, obligations, easements and rights of way that are not Permitted Liens; (d) all liabilities and obligations arising before, on or after the Closing Date from or in connection with the Permits that are included in the Acquired Assets; 64
Sample 1
Applicable Remediation Standards mean those standards with respect to the presence of a Hazardous Substance on, under or emanating from a Real Property which (A) are sufficient to satisfy the requirements of the regulatory authorities having jurisdiction so that such regulatory authorities affirmatively issue a letter or other document confirming that no further action is required with respect to the investigation, cleanup, remediation or monitoring with respect to such Hazardous Substance or (B) where the regulatory authorities do not issue such letters or other documents, satisfy the publicly promulgated requirements of Environmental Law and such regulatory authorities with respect to the satisfactory completion of investigation, remediation, cleanup and monitoring of such Hazardous Substance as set forth in a certification of the Control Party’s independent environmental consultant and approved in writing by the non-Control Party, acting reasonably, provided that the standards must be those which will not unreasonably restrict general industrial activity at the Real Property.
Sample 1
Applicable Remediation Standards means standards applicable to Remedial Action which are:
Sample 1

Related to Applicable Remediation Standards

  • Generally applicable environmental radiation standards means standards issued by the U.S. Environmental Protection Agency (EPA) under the authority of the Atomic Energy Act of 1954, as amended, that impose limits on radiation exposures or levels, or concentrations or quantities of radioactive material, in the general environment outside the boundaries of locations under the control of persons possessing or using radioactive material.

  • Remediation waste means all solid and hazardous wastes, and all media (including groundwater, surface water, soils, and sediments) and debris that are managed for implementing cleanup.

  • Applicable requirement means all of the following as they apply to emission units in a source requiring an air quality operating permit (including requirements that have been promulgated or approved by the Department or the administrator through rule making at the time of issuance of the air quality operating permit, but have future-effective compliance dates, provided that such requirements apply to sources covered under the operating permit):

  • Applicable Requirements means all applicable federal, state and local laws, regulations, rules, ordinances, codes, decrees, judgments, directives, or judicial or administrative orders, permits, licenses, authorizations, approvals and other duly authorized actions of any federal, state, local or other governmental regulatory or administrative agency, court, commission, department, board, or other governmental subdivision, legislature, rulemaking board, tribunal, or other governmental authority having jurisdiction, NYISO, NYSRC and NPCC requirements, and any applicable reliability standards.

  • Licensed site remediation professional means an individual who is licensed by the Site Remediation Professional Licensing Board pursuant to section 7 of P.L.2009, c.60 (C.58:10C-7) or the department pursuant to section 12 of P.L.2009, c.60 (C.58:10C-12).

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Applicable Rules means Section 10D of the Exchange Act, Rule 10D-1 promulgated thereunder, the listing rules of the national securities exchange or association on which the Company’s securities are listed, and any applicable rules, standards or other guidance adopted by the Securities and Exchange Commission or any national securities exchange or association on which the Company’s securities are listed.

  • Remediation Plan means a report identifying:

  • Remediation waste management site means a facility where an owner or operator is or will be treating, storing or disposing of hazardous remediation wastes. A remediation waste management site is not a facility that is subject to corrective action under § 264.101 of this regulation, but is subject to corrective action requirements if the site is located in such a facility.

  • Applicable Regulations As to any Mortgage Loan, all federal, state and local laws, statutes, rules and regulations applicable thereto.

  • Remediation means any response, remedial, removal, or corrective action, any activity to cleanup, detoxify, decontaminate, contain or otherwise remediate any Hazardous Materials, Regulated Substances or USTs, any actions to prevent, cure or mitigate any Release, any action to comply with any Environmental Laws or with any permits issued pursuant thereto, any inspection, investigation, study, monitoring, assessment, audit, sampling and testing, laboratory or other analysis, or any evaluation relating to any Hazardous Materials, Regulated Substances or USTs.

  • Environmental Regulations means any federal, state or local law, statute, code, ordinance, regulation, requirement or rule relating to dangerous, toxic or hazardous pollutants, Hazardous Substances or chemical waste, materials or substances.

  • Environmental and Social Standards or “ESSs” means, collectively:

  • Environmental Requirement means any Environmental Law, agreement or restriction, as the same now exists or may be changed or amended or come into effect in the future, which pertains to health or safety (as they relate to natural resources or the environment), any Hazardous Material, or the environment, including ground, air, water or noise pollution or contamination, and underground or aboveground tanks.

  • Applicable Environmental Laws means any applicable federal, state, or local government law (including common law), statute, rule, regulation, ordinance, permit, license, requirement, agreement or approval, or any applicable determination, judgment, injunction, directive, prohibition or order of any governmental authority with jurisdiction at any level of federal, state, or local government, relating to pollution or protection of the environment, ecology, natural resources, or public health or safety.

  • Site Rules means all rules, regulations, directives and policies notified by the Company from time to time which are intended to be of general application to persons at a Site controlled or managed by the Company.

  • cGMP means current Good Manufacturing Practice as set forth in the United States Federal Food, Drug, and Cosmetic Act, as amended, and includes all rules and regulations promulgated by the FDA thereunder.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Network Connection Standards means the Distributor’s written technical and safety standards for connection of an Electrical Installation to the Network that are issued by the Distributor and updated from time to time, and include:

  • Emission standard means specified limitations on the discharge of air contaminants into the atmosphere.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Good Laboratory Practices or “GLP” means the then-current good laboratory practice standards promulgated or endorsed by the FDA, as defined in U.S. 21 C.F.R. Part 58 (or such other comparable regulatory standards in jurisdictions outside the United States, as they may be updated from time to time).

  • NYSRC Reliability Rules means the rules applicable to the operation of the New York Transmission System. These rules are based on Reliability Standards adopted by NERC and NPCC, but also include more specific and more stringent rules to reflect the particular requirements of the New York Transmission System.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Applicable Environmental Law means all Applicable Laws pertaining to the protection of the environment (e.g., prevention of pollution and remediation of contamination) and human health and safety, including, without limitation, the Clean Air Act, 42 U.S.C. § 7401 et seq.; the Clean Water Act, 33 U.S.C. § 1251 et seq.; the Oil Pollution Act of 1990, 33 U.S.C. § 2702 et seq.; the Marine Protection, Research, and Sanctuaries Act, 33 U.S.C. § 1401 et seq.; the National Environmental Policy Act, 42 U.S.C. § 4321 et seq.; the Noise Control Act, 42. U.S.C. § 4901 et seq.; the Occupational Safety and Health Act, 29 U.S.C. § 651 et seq.; the Resource Conservation and Recovery Act (“RCRA”), 42 U.S.C. § 6901 et seq., as amended by the Hazardous and Solid Waste Amendments of 1984; the Safe Drinking Water Act, 42 U.S.C. § 300f et seq.; the Comprehensive Environmental Response, Compensation and Liability Act (“CERCLA”), 42 U.S.C. § 9601 et seq., as amended by the Superfund Amendments and Reauthorization Act; the Emergency Planning and Community Xxxxx-xx-Xxxx Xxx, 00 X.X.X. § 00000 et seq.; the Toxic Substances Control Act, 15 U.S.C. § 2601 et seq.; the Hazardous Materials Transportation Act, 49 U.S.C. § 1801 et seq.; the Atomic Energy Act, 42 U.S.C. § 2011 et seq.; and the Nuclear Waste Policy Act of 1982, 42 U.S.C. § 10101 et seq.; and all analogous applicable state and local Applicable Laws, including, without limitation, Tex. Nat. Res. Code, Title 3 (Oil and Gas) and 16 Tex. Admin. Code. pt. 1 (Railroad Commission of Texas).