ALTERATIONS AND ADDITIONS definition

ALTERATIONS AND ADDITIONS. Tenant's Alterations: With the exception of Tenant Improvements installed as part of initial construction of the Premises, Tenant shall not make, or suffer to be made, any alteration or addition to the Premises ("Alterations"), or any part thereof, without obtaining Landlord's prior written consent, which consent shall not be unreasonably withheld, and delivering to Landlord the proposed architectural and structural plans for all such Alterations at least fifteen (15) days prior to the start of construction. If such Alterations affect the structure of the Building, Tenant additionally agrees to reimburse Landlord its reasonable out-of-pocket costs incurred in reviewing Tenant's plans. After receipt of Tenant's proposed architectural and structural plans for all such Alterations Landlord shall have a period of ten (10) business days thereafter to grant or deny its consent. Failure by Landlord to respond within such ten (10) business day period shall be deemed approval of such proposed architectural and structural plans. After obtaining Landlord's consent, which consent shall state whether or not Landlord will require Tenant to remove such Alteration at the expiration or earlier termination of this Lease, Tenant shall not proceed to make such Alterations until Tenant has obtained all required governmental approvals and permits, and provides Landlord reasonable security, in form reasonably approved by Landlord, to protect Landlord against mechanics' lien claims. Tenant agrees to provide Landlord (i) written notice of the anticipated and actual start-date of the work, (ii) a complete set of half-size (15" X 21") vellum as-built drawings, and (iii) a certificate of occupancy for the work upon completion of the Alterations. All Alterations shall be constructed in compliance with all applicable building codes and laws including, without limitation, the Americans with Disabilities Act of 1990 as amended from time to time. During the Lease Term, the Alterations shall be the property of the Tenant and Tenant shall be entitled to all tax benefits associated therewith. Upon the Expiration Date, all Alterations, except movable furniture and trade fixtures, shall become a part of the realty and belong to Landlord but shall nevertheless be subject to removal by Tenant as provided in Section 6 above. Alterations which are not deemed as trade fixtures include heating, lighting, electrical systems, air conditioning, walls, carpeting, or any other installation which has beco...
Sample 1
ALTERATIONS AND ADDITIONS means all modifications, alterations, --------------------------- additions, improvements, supplements, repairs, renovations or changes to or upon any real or personal property, including without limitation those made subsequent to Closing.
Sample 1

Examples of ALTERATIONS AND ADDITIONS in a sentence

  • Tenant shall remove all of its personal property and fixtures on the Premises prior to the expiration of the term of this Lease and if required by Landlord pursuant to the ALTERATIONS AND ADDITIONS section above, any alterations, improvements or additions made by Tenant to the Premises.

  • ALTERATIONS AND ADDITIONS; AND SURRENDER OF PREMISES ..................9 11.

  • ALTERATIONS AND ADDITIONS; AND SURRENDER OF PREMISES .................

  • Tenant must also comply with the conditions designated in the ADDITIONAL ALTERATIONS AND ADDITIONS section, regarding Landlord notification, construction and mechanic’s liens, and removal of the dish.

  • ALTERATIONS AND ADDITIONS; AND SURRENDER OF PREMISES.............

  • ALTERATIONS AND ADDITIONS; AND SURRENDER OF PREMISES.......................8 11.

  • ALTERATIONS AND ADDITIONS, MECHANICS' LIENS Section 20.1 Alterations and Additions..............................

  • ALTERATIONS AND ADDITIONS Lessee shall make no alterations, additions or improvements to the Premises or any part thereof (collectively “Alterations”) without first obtaining the prior written consent of the Lessor.

  • ALTERATIONS AND ADDITIONS BY TENANT; LIENS AND INSOLVENCY 13.1 Alterations and Additions by Tenant 13.2 Liens and Insolvency .

  • ALTERATIONS AND ADDITIONS; AND SURRENDER OF PREMISES......................8 11.

Related to ALTERATIONS AND ADDITIONS

  • Alterations means all changes, additions, improvements or repairs to, all alterations, reconstructions, renewals, replacements or removals of and all substitutions or replacements for any of the Improvements or Equipment, both interior and exterior, structural and non-structural, and ordinary and extraordinary.

  • Specialty Alterations means Alterations consisting of kitchens, executive bathrooms, raised computer floors, computer installations, vaults, libraries, internal staircases, dumbwaiters, pneumatic tubes, vertical and horizontal transportation systems, and other Alterations of a similar character.

  • Structural Alterations means any Alterations involving the structural, mechanical, electrical, plumbing, fire/life safety or heating, ventilating and air conditioning systems of the Building.

  • Base Building shall include the structural portions of the Building, the public restrooms and the Building mechanical, electrical and plumbing systems and equipment located in the internal core of the Building on the floor or floors on which the Premises are located. Tenant shall promptly provide Landlord with copies of any notices it receives regarding an alleged violation of Law. Tenant shall comply with the rules and regulations of the Building attached as Exhibit E and such other reasonable rules and regulations adopted by Landlord from time to time, including rules and regulations for the performance of Alterations (defined in Section 9).

  • Common Areas and Facilities means collectively the Development Common Areas and Facilities and the Residential Common Areas and Facilities and all those parts and such of the facilities of the Development designated as common areas and facilities in any Sub-Deed;

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Repairs means the repairs to be made to the Mortgaged Property, as described on the Repair Schedule of Work (Exhibit C) or as otherwise required by Lender in accordance with this Loan Agreement.

  • Installations means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Structural alteration means an Alteration that (i) will result in a change in the footprint of the Improvements, (ii) involves the addition of one or more floors to the Improvements, (iii) affects the structural elements or any exterior walls of the Improvements, (iv) decreases the rentable square footage of the Leased Premises other than to a de minimis extent or (v) adversely affects the proper functioning and/or capacity of the building systems in the Improvements.

  • Demolition means the wrecking or taking out of any load-supporting structural member of a facility together with any related handling operations or the intentional burning of any facility.

  • Structural damage means a covered building, regardless of the date of its construction, has experienced the following.

  • Leasehold Improvements means all leasehold improvements situated in or on the Leased Real Property and owned by Seller.

  • General Conditions Cost means costs incurred and minor work performed by Contractor without the need for competitive bids/proposals. The allowable General Conditions items are limited in Paragraph 11.1 and are further described on Exhibit “D”. The maximum allowable General Conditions Cost payable to Contractor during the Construction Phase of the Project is set out in Exhibit “A” attached to this Agreement.

  • Utility Installation means carpeting, window and wall coverings, power panels, electrical distribution systems, lighting fixtures, air conditioning, plumbing, and telephone and telecommunication wiring and equipment. At the expiration of the term, Lessor may require the removal of any or all of said alterations, improvements, additions or Utility Installations, and the restoration of the Premises and the Office Building Project to their prior condition, at Lessee's expense. Should Lessor permit Lessee to make its own alterations, improvements, additions or Utility Installations, Lessee shall use only such contractor as has been expressly approved by Lessor, and Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, or use a contractor not expressly approved by Lessor, Lessor may, at any time during the term of this Lease, require that Lessee remove any part or all of the same.

  • Structural as herein used shall mean any portion of the Leased Premises, Building or Common Areas of the Complex which provides bearing support to any other integral member of the Leased Premises, Building or Common Areas of the Complex such as, by limitation, the roof structure (trusses, joists, beams), posts, load bearing walls, foundations, girders, floor joists, footings, and other load bearing members constructed by Landlord.

  • Construction and demolition debris means and includes:

  • Demolition works means any physical activity to tear down or break up a structure (or part thereof) or surface, or the like, and includes the loading of demolition waste and the unloading of plant or machinery.

  • Interior means the spaces, parts, components or elements of an individual dwelling unit.

  • Tenant Improvements Defined in Exhibit B, if any.

  • Installation Information for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made.