Airworthiness Limitations definition

Airworthiness Limitations means a life limitation applicable to life limited part or any maintenance task which is mandatory as a condition of the type certificate of an aeronautical product or as specified by Director General.
Sample 1Sample 2Sample 3
Airworthiness Limitations. All airworthiness limitations checks which are due before the next phase check shall be accomplished. In the event that these checks are performed in phases in conjunction with the system/power plant/zonal C check, the current phase shall be performed with the required return condition C Check phase.
Sample 1

Examples of Airworthiness Limitations in a sentence

  • From 1st August 2015 arising from the Amendment of the Organisation of Working Time Act 1997, if an employee is absent from work on certified sick leave, annual leave will accrue based on the statutory annual leave entitlement of 20 days per annum (pro‐rata for part time staff).

  • The change alters the Airworthiness Limitations or the Operating Limitations.

  • The Instructions for Continued Airworthiness must contain a section titled Airworthiness Limitations that is segregated and clearly distinguishable from the rest of the document.

  • Each of the inspections or other procedures developed under CS 23.2240 must be included in the Airworthiness Limitations Section of the Instructions for Continued Airworthiness required by CS 23.2625.(b) For Level-4 aeroplanes, the procedures developed for compliance with CS 23.2240(a) must be capable of detecting structural damage before the damage could result in structural failure.

  • Acceptance or approval, as appropriate, of instructions for continued airworthiness (ICA), including the Airworthiness Limitations Section (ALS) of the ICA, will be managed by the VA office responsible for the product.

  • Revisions to Airworthiness Limitations must be LBA approved for the FAA.

  • Please see Appendix M, QM Meeting Minutes Sample and Policy 804.1, Medi-Cal Beneficiary Appeals and Expedited Appeals, and refer to the highlighted sections.

  • These replacement times, inspections, or other procedures must be included in the Airworthiness Limitations Section of the Instructions for Continued Airworthiness required by CS 27.1529.

  • The Airworthiness Limitations section is FAA-approved and specifies maintenance required under 14 CFR 43.16 and 91.403 of the Federal Aviation Regulations, unless an alternative program has been FAA approved.

  • Airworthiness Limitations based on the evaluations resulting from the above will be formally incorporated into the aircraft’s Airworthiness Limitations Section (ALS) of the ICA.

Related to Airworthiness Limitations

  • continuing airworthiness means all of the processes ensuring that, at any time in its operating life, the aircraft complies with the airworthiness requirements in force and is in a condition for safe operation;

  • Airworthiness Directive or “AD” means any airworthiness directive issued by the Certificating Authority, in addition to any airworthiness directive issued by the Aeronautics Authority, each to the extent the same is applicable to the Aircraft and/or any Item of Equipment.

  • Applicable effluent standards and limitations means all State and Federal effluent standards and limitations to which a discharge is subject under the Act, including, but not limited to, effluent limitations, standards of performance, toxic effluent standards and prohibitions, and pretreatment standards.

  • Technical Limits means the limits and constraints described in Schedule 2, relating to the operations, maintenance and dispatch of the Project.

  • MARPOL 73/78 means the International Convention for the Prevention of Pollution from Ships, 1973, as amended by the Protocol of 1978 relating thereto and by any other amendment in force thereafter;

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • the 2000 Regulations means the Water Supply (Water Quality) Regulations 2000(b); "the 2001 Regulations" means the Water Supply (Water Quality) Regulations 2001(c);

  • Loss Absorption Regulations means, at any time, the laws, regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities and/or loss absorbing capacity instruments of the United Kingdom, the PRA, the United Kingdom resolution authority, the Financial Stability Board and/or of the European Parliament or of the Council of the European Union then in effect in the United Kingdom including, without limitation to the generality of the foregoing, any delegated or implementing acts (such as regulatory technical standards) adopted by the European Commission and any regulations, requirements, guidelines, rules, standards and policies relating to minimum requirements for own funds and eligible liabilities and/or loss absorbing capacity instruments adopted by the PRA and/or the United Kingdom resolution authority from time to time (whether or not such regulations, requirements, guidelines, rules, standards or policies are applied generally or specifically to the Company or to the Regulatory Group).

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • Design requirements means the written description of the infrastructure facility to be procured pursuant to this article, including:

  • Technical Requirements means the Technical Requirements in Section VII of the tendering documents.

  • Technical Standards means the technical standards set out in paragraph 2.5 of the Order Form;

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Environmental Standards means regulations or certification specifications governing the certification of designs with regard to noise characteristics and exhaust emissions of civil aeronautical products and appliances.

  • Switching and Tagging Rules means the switching and tagging procedures of Interconnected Transmission Owners and Interconnection Customer as they may be amended from time to time.

  • Environmental and Social Standards or “ESSs” means, collectively:

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • international flight means all flights other than Domestic Flights.

  • Hague-Visby Rules means the provisions of the International Convention for the Unification of certain rules Relating to Bills of Lading signed at Brussels on 25th August 1924 as amended by the Visby Protocol of 23rd February 1968 and the SDR Protocol of 21st December 1979;

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • international voyage means a voyage from a country to which the present Convention applies to a port outside such country, or conversely.