Air analysis definition

Air analysis means the microscopic examination of collected air samples to determine airborne fiber concentrations.

Examples of Air analysis in a sentence

  • All analytical work for Volatile Organic and Air analysis are transferred to and conducted at our 830 Silver Street location (PA-68-04426).

  • Air analysis shall be made for lead content to determine if the atmosphere is satisfactory prior to allowing personnel to enter the cargo pump-room or void spaces surrounding the cargo tank.

  • All analytical work for Volatile Organic and Air analysis are transferred to and conducted at our 830 Silver Street location (NY-11840, FL-E87936 and NJ-MA012).

  • References 1 Air analysis 1.1 Review papersUseful review papers were published that provide a summary of the current and emerging technologies for the characterization of the elemental component in atmospheric particles7 (22 references); brown carbon aerosols8 (377 references) airborne nanoparticles9 (91 references) and in nanomaterials (57 references)10.

  • All analytical work for Volatile Organic and Air analysis are transferred to and conducted at our 830 Silver Street location (NY-11840, NJ-MA012, PA-68-04426 and FL-E87936).

  • Air analysis: Objectives of air quality monitoring, location of sampling stations, physical site factors, period, frequency and duration of sampling.

  • Air analysis from an accredited independent laboratory must be performed every 6 months and meet the requirements in Appendix 6; and All tanks, fixtures and fittings must meet the appropriate requirements of the CSA Standard B51-03 (R2007) Boiler, Pressure Vessel, and Pressure Piping Code.

  • Air analysis will be accomplished using Methods for the Determination of Toxic Organic Compounds in Ambient Air, EPA/600/4-89/018 (and supplements); State of California Air Resources Board (CARB) Source Test Methods, 1990; and NIOSH Manual of Analytical Methods, US Dept.

  • Air analysis indicates that all parameters as indicated in NAAQS 2009 are within prescribed standards except PM10 which is coming out to be 120.79 μg/m3.

  • Air analysis conducted six days after the application by NIOSH, the US Coast Guard, the USDA and AlP manufacturers found phosphine concentrations in the 20-30 ppm range in a "void space of the main deck adjacent to the air intake system for ventilation amidships.

Related to Air analysis

  • Cost Analysis means the evaluation of cost data for the purpose of arriving at estimates of costs to be incurred, prices to be paid, costs to be reimbursed, or costs actually incurred.

  • risk analysis the analysis required under Rule 17f-7(a)(1)(i)(A).

  • Forensic analysis means the practice of gathering, retaining, and analyzing computer-related data for investigative purposes in a manner that maintains the integrity of the data.

  • Guaranteed analysis means the percentage of plant nutrients or measures of neutralizing capability claimed to be present in a fertilizer.

  • Comprehensive resource analysis means an analysis including,

  • Asset adequacy analysis means an analysis that meets the standards and other requirements referred to in 5.34(5)“d.”

  • Applied behavior analysis means the design, implementation, and evaluation of environmental modifications, using behavioral stimuli and consequences, to produce socially significant improvement in human behavior, including the use of direct observation, measurement, and functional analysis of the relationship between environment and behavior.

  • Research Analyst means any individual employed by Loomis Sayles who has been designated as a Research Analyst or Research Associate by Loomis Sayles. A person is considered a Research Analyst only as to those Covered Securities which he or she is assigned to cover and about which he or she issues research reports to other Investment Persons or otherwise makes recommendations to Investment Persons beyond publishing their research. As to other securities, he or she is simply an Access Person.

  • Rebate Analyst means the person or firm selected by the Issuer to calculate the Rebate Amount, which person or firm shall either be a firm of attorneys or independent certified public accountants with expertise in the calculation of the Rebate Amount.

  • Total resource cost test or "TRC test" means a standard that is met if, for an investment in energy efficiency or demand-response measures, the benefit-cost ratio is greater than one. The benefit-cost ratio is the ratio of the net present value of the total benefits of the program to the net present value of the total costs as calculated over the lifetime of the measures. A total resource cost test compares the sum of avoided electric utility costs, representing the benefits that accrue to the system and the participant in the delivery of those efficiency measures, as well as other quantifiable societal benefits, including avoided natural gas utility costs, to the sum of all incremental costs of end-use measures that are implemented due to the program (including both utility and participant contributions), plus costs to administer, deliver, and evaluate each demand-side program, to quantify the net savings obtained by substituting the demand-side program for supply resources. In calculating avoided costs of power and energy that an electric utility would otherwise have had to acquire, reasonable estimates shall be included of financial costs likely to be imposed by future regulations and legislation on emissions of greenhouse gases.

  • Certificate of Analysis means a document signed by an authorized representative of Manufacturer, describing Specifications for, and testing methods applied to, Product, and the results of testing.

  • Analysis means the testing or examination of any matter, substance or process for the purpose of determining its composition or qualities or its effect (whether physical, chemical or biological) on any segment of the environment or examination of emissions or recording of noise or sub-sonic vibrations to determine the level or other characteristics of the noise or sub-sonic vibration or its effect on any segments of the environment;

  • Paralysis means complete and irreversible loss or use of an arm or leg (without severance).

  • Root Cause Analysis Report means a report addressing a problem or non-conformance, in order to get to the ‘root cause’ of the problem, which thereby assists in correcting or eliminating the cause, and prevent the problem from recurring.

  • Geotechnical report or "geotechnical analysis" means a scientific study or evaluation conducted by a qualified expert that includes a description of the ground and surface hydrology and geology, the affected land form and its susceptibility to mass wasting, erosion, and other geologic hazards or processes, conclusions and recommendations regarding the effect of the proposed development on geologic conditions, the adequacy of the site to be developed, the impacts of the proposed development, alternative approaches to the proposed development, and measures to mitigate potential site-specific and cumulative geological and hydrological impacts of the proposed development, including the potential adverse impacts to adjacent and down-current properties. Geotechnical reports shall conform to accepted technical standards and must be prepared by qualified professional engineers or geologists who have professional expertise about the regional and local shoreline geology and processes.

  • Stability means structural stability.

  • Development Report means a written account of Licensee’s progress under the Development Plan having at least the information specified on Appendix B to this Agreement, and shall be sent to the address specified on Appendix B.

  • Engineering means the application of scientific knowledge for the design, control, or use of building structures, equipment, or apparatus.

  • COA means certificate of analysis.

  • Quality Assurance means a systematic procedure for assessing the effectiveness, efficiency, and appropriateness of services.

  • Project Management Report means each report prepared in accordance with Section 4.02 of this Agreement;

  • Risk assessment means a programme to determine any risk associated with any hazard at a construction site, in order to identify the steps needed to be taken to remove, reduce or control such hazard;

  • Baseline data means information gathered at a selected point in time and used thereafter as a basis from which to monitor change.