Aerodynamic drag definition

Aerodynamic drag means the force opposing a vehicle’s forward motion through air.
Sample 1Sample 2Sample 3
Aerodynamic drag means the force that opposes a vehicle’s forward motion through air.
Sample 1Sample 2Sample 3
Aerodynamic drag means the force that opposes a vehicle’s forward motionthrough air.
Sample 1Sample 2

Examples of Aerodynamic drag in a sentence

  • Aerodynamic drag may be reduced using devices such as cab roof fairings, cab side gap fairings, cab side skirts, and on the trailer side, trailer side skirts, gap fairings, and trailer tail.

  • Aerodynamic drag may be reduced by using devices such as cab roof fairings, cab side gap fairings, and cab side skirts.

  • Aerodynamic drag is a force induced by the relative velocity of a car and a fluid, which acts along the direction of a fluid flow, therefore opposite to the vehicle driving direction.

  • Aerodynamic drag and reverse thrust are most effective at higher speeds, and provide a greater proportion of stopping force on wet compared with dry runways.

  • Aerodynamic drag along the stack wall, damper vanes, right angle bends, and side entry ducts etc.

  • Aerodynamic drag and the total heat energy were calculated by integrating the distribution of pressure, shear stress and heat flux along the surface of the geometries.

  • Aerodynamic drag is the force that acts on a vehicle’s surface caused by moving air and depends mainly on the vehicle’s frontal area (AF), density of air (rho), the mean velocity of the vehicle (Vm) and the dimensionless drag coefficient (CD).

  • Aerodynamic drag refers to the aerodynamic force that acts opposite to the relative motion of a body through a fluid.

  • Aerodynamic drag has been a subject of research for over 100 years.

  • Aerodynamic drag increases with the square of speed, and thus the power requirement increases with the cube of speed.


More Definitions of Aerodynamic drag

Aerodynamic drag means the force opposingthat opposes a vehicle’s forward motion through air.
Sample 1

Related to Aerodynamic drag

  • Biochemical Oxygen Demand (BOD) shall mean the quantity of oxygen utilized in the biochemical oxidation of organic matter under standard laboratory procedure in five (5) days at 20 degrees Centigrade, expressed in milligrams per liter.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Anaerobic digestion ’ means a controlled process involving microbial decomposition of organic matter in the absence of oxygen ;

  • Biochemical Oxygen Demand (BOD means the quantity of oxygen utilized in the biochemical oxidation of organic matter under standard laboratory procedure in five (5) days at 20 degrees C, expressed in milligrams per liter.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • coronavirus means severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2);

  • Biomethane means biogas that meets pipeline quality natural gas standards.

  • Web spray adhesive means any aerosol adhesive that is not a mist spray or special purpose spray adhesive.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Massive Multiauthor Collaboration Site (or “MMC Site”) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” (or “MMC”) contained in the site means any set of copyrightable works thus published on the MMC site.

  • Halogen means one of the chemical elements chlorine, bromine or iodine.

  • HEPA filter means a high efficiency particulate absolute air filter capable of trapping and retaining 99.97 percent of fibers greater than 0.3 micrometers in mass median aerodynamic diameter equivalent.

  • Vector means a carrier that is capable of transmitting a pathogen from one organism to another including, but not limited to, flies and other insects, rodents, birds, and vermin.

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Tetrahydrocannabinol means the natural or synthetic equivalents of the substances contained in the plant, or in the resinous extractives of, Cannabis sativa, or any synthetic substances, compounds, salts, or derivatives of the plant or chemicals and their isomers with similar chemical structure and pharmacological activity.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • GFR means General Financial Rules

  • Alternative nicotine product means any vaping product, whether or not it includes nicotine, including electronic smoking devices, that can be ingested into the body by chewing, smoking, absorbing, dissolving, inhaling, or by any other means. ‘Alternative nicotine product’ does not include:

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • chemical tanker means a ship constructed or adapted and used for the carriage in bulk of any liquid product listed in chapter 17 of the International Bulk Chemical Code;

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Total tetrahydrocannabinol means the sum of the percentage by weight of tetrahydrocannabinolic acid multiplied by eight hundred seventy-seven thousandths plus the percentage of weight of tetrahydrocannabinol.

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • Cannabinoid means any of the chemical compounds that are the active constituents of marijuana.