Additional Tests definition

Additional Tests shall have the meaning set forth in Section 5.4.1.
Sample 1Sample 2Sample 3
Additional Tests has the meaning set forth in the “Acceptance Test Procedures” Exhibit.
Sample 1Sample 2Sample 3
Additional Tests has the meaning given in Section 4.5(a).
Sample 1

Examples of Additional Tests in a sentence

  • Additional tests, for examining relevant characteristics, may be established.

  • Additional tests will be undertaken, with the agreement of the President of CPVO, where distinctness is unlikely to be shown using the characters listed in the protocol.

  • Additional tests and inspections, at Contractor's expense, are performed to determine compliance of replaced or additional work with specified requirements.

  • Additional tests will be required when concrete consistency changes.

  • Additional tests shall be made after the reflector/system or part(s) thereof has been moved vertically ±2° or at least into the maximum position, if less than 2°, from its initial position by means of the headlamps/systems or part(s) thereof adjusting device.

  • Additional tests may be defined in case further quality assessment is required.

  • Additional tests will be required in both directions from the failed test until satisfactory results are obtained.

  • Additional tests can be run to confirm the equipment’s performance.

  • Additional tests at a site of initially failed testing will be paid for by the Contractor.

  • Additional tests may also be conducted where in the opinion of the Engineer such tests are needed.


More Definitions of Additional Tests

Additional Tests means any tests required as a result of failure to submit to tests required in a corrective action plan.
Sample 1

Related to Additional Tests

  • Additional Term shall have the meaning set forth in Section 8.2.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Over-Riding Nomination Criteria means the criteria set out in clause 4.2.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Additional Terms means any additional terms agreed in writing amending, varying or agreeing additions to these Terms;

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • ASAM criteria means the most current edition of the American Society of Addiction Medicine's published criteria for admission to treatment, continued services, and discharge.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Covenant Testing Period means the period commencing on the last day of the fiscal month of Borrower most recently ended prior to the occurrence of a Fixed Charge Test Commencement Date for which month Borrowers have delivered to Agent monthly financial statements of Solutions and its Subsidiaries, and continuing until the Termination Date has occurred.

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • Design Criteria means the design criteria set out in the Ministry’s publication “Design Criteria for Sanitary Sewers, Storm Sewers and Forcemains for Alterations Authorized under Environmental Compliance Approval”, (as amended from time to time).

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Nomination Criteria means the criteria made up of the Over-Riding Nomination Criteria andthe Specific Nomination Factors, and is also referred to as “this Criteria”.

  • Design Criteria Package means concise, performance-oriented drawings or specifications for a public construction project. The purpose of the Design Criteria Package is to furnish sufficient information to permit Design-Build Firms to prepare a bid or a response to the District’s Request for Proposals, or to permit the District to enter into a negotiated Design- Build Contract. The Design Criteria Package must specify performance- based criteria for the public construction project, including the legal description of the site, survey information concerning the site, interior space requirements, material quality standards, schematic layouts and conceptual design criteria of the project, cost or budget estimates, design and construction schedules, site development requirements, provisions for utilities, stormwater retention and disposal, and parking requirements applicable to the project. Design Criteria Packages shall require firms to submit information regarding the qualifications, availability, and past work of the firms, including the partners and members thereof.

  • Initial compliance period means the first full three-year compliance period which begins at least 18 months after promulgation, except for the following contaminants: Dichloromethane; 1,2,4-Trichlorobenzene; 1,1,2- Trichloroethane; Benzo[a]pyrene; Dalapon; Di(2-ethylhexyl adipate; Di(2-ethylhexyl) phthalate; Dinoseb; Diquat; Endothall; Endrin; Glyphosate; Hexachlorobenzene; Hexachlorocyclopentadiene; Oxamyl (Vydate); Picloram; Simazine; 2,3,7,8-TCDD (Dioxin); Antimony; Beryllium; Cyanide; Nickel; and Thallium, initial compliance period means the first full three-year compliance period after promulgation for systems with 150 or more service connections (January 1993 -December 1995) and first full three-year compliance period after the effective date of regulation (January 1996 - December 1998) for systems having fewer than 150 service connections.

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Time for Completion means the time for completing the Works as stated in the Contract Data (or as extended under Sub-Clause 7.3), calculated from the Commencement Date.

  • Review Criteria has the meaning assigned to that term in Section 12.02(b)(i).

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.

  • Selection Criteria means and includes all of the requirements, considerations,

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Acceptance Criteria means the Specifications, goals, performance measures, testing results and/or other criteria designated by the Agency and against which the Deliverables may be evaluated for purposes of Acceptance or Non-acceptance thereof.

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.