Active Power definition

Active Power has the meaning given to it in the Grid Code;

Active Power the product of voltage and the in-phase component of alternating current measured in units of Xxxxx and standard multiples thereof i.e. 1000 Xxxxx = 1kW, 1000 kW = 1MW, 1000 MW = 1GW, 1000 GW = 1TW;

Active Power means the real component of the apparent power at fundamental frequency, expressed in watts or multiples thereof such as kilowatts ('kW') or megawatts ('MW');

Examples of Active Power in a sentence

• Vstartup is the average Grid Voltage value of the quarter hour following the quarter hour during which the unit started up for the last time (meaning the last moment in time where the Technical Unit’s Pmeasured started to exceed its Minimum Active Power Threshold in Injection, in Offtake or in Compensator Mode (Pmin in Figure 2) as agreed in Annex 1).

• The choice of time interval must meet the following criteria: o There are no radical variations in the frequency of the system and the net Active Power of the Technical Unit during the time interval, and the Setpoint is not changed.

• II.5.1 The Manual Control Service Type is to be available for activation without interruption when a Technical Unit is injecting (or offtaking) Active Power above or equal to its Minimum Active Power Threshold in Injection (or in Offtake) or offtaking Active Power between its Minimum Active Power Threshold in Compensator Mode and its Maximum Active Power Threshold in Compensator Mode (as agreed in Annex 1).

• For a Controlling Technical Unit for 4 consecutive quarter-hours, remuneration for each quarter-hour would be as follows: o Qh 0 : Assuming the Technical Unit started injecting Active Power above its Minimum Active Power Threshold in Injection (as per Annex 1) during the previous quarter-hour, the measured Average Grid Voltage over Qh 0 is assumed to be Vstartup and the measured Reactive Power is assumed to be 0 MVAr so that Qinitial is set to 0 MVAr .

• The Providing Unit must be exporting Active Power to the Power System and must remain connected to the Power System for at least 15 minutes following the Fault Disturbance.

More Definitions of Active Power

Active Power means the product of voltage and the in-phase component of alternating current measured in units of watts and standard multiples thereof.

Active Power means the useful component of the product of voltage and current, which the Plant shall provide to or absorb from the Purchaser Grid System and which is measured in Megawatt (MW).

Active Power means the electrical power, being the product of root mean square (rms) voltage, root mean square (rms) current and cosine of the phase angle between the voltage and current vectors and measured in units of ‘Watt’ (W) or in standard multiples thereof;

Active Power. The capacity of the circuit for performing work in a particular time.

Active Power means the product of voltage (Volts) and the in phase component of alternating current (Amperes), measured in unit of xxxxx or standard multiples thereof.

Active Power means the product of voltage and the in-phase component of alternating current measured in units of Xxxxx and standard multiples thereof i.e: 1000 Xxxxx = 1kW 1000 kW = 1MW 1000 MW = 1GW; "Affiliate" means a company or corporation which is:- (i) the ultimate Holding Company of that company; (ii) a Subsidiary of that company; (iii) a Subsidiary of the ultimate Holding Company of that company. For the purposes of this definition the terms "Holding Company" and "Subsidiary" shall have the meanings assigned to them by section 1159 of the Companies Xxx 0000;

Active Power is equal to IV cos φ where φ is the phase angle between current and voltage;