1
EXHIBIT 10.3
CONFIDENTIAL TREATMENT--EDITED COPY
MANUFACTURING SERVICES AGREEMENT
BY AND BETWEEN
SCICLONE PHARMACEUTICALS INTERNATIONAL LTD.
AND
ISF S.P.A.
2
CONFIDENTIAL TREATMENT--EDITED COPY
TABLE OF CONTENTS
Page
----
RECITALS................................................................................ 1
ARTICLE I DEFINITIONS.................................................................. 1
1.1 "Acceptance Period"......................................................... 1
1.2 "Affiliate"................................................................. 1
1.3 "Ampoule"................................................................... 1
1.4 "Customer".................................................................. 2
1.5 "Delivery Date"............................................................. 2
1.6 "Excipient"................................................................. 2
1.7 "Facility".................................................................. 2
1.8 "FDA"....................................................................... 2
1.9 "Finished Product".......................................................... 2
1.10 "Manufacturer"............................................................. 2
1.11 "Methods".................................................................. 2
1.12 "Processing"............................................................... 2
1.13 "Specifications"........................................................... 2
1.14 "TA 1 Bulk Specifications"................................................. 2
1.15 "Thymosin Alpha 1" or "TA-1"............................................... 2
ARTICLE II FORECAST, PURCHASE AND SUPPLY............................................... 3
2.1 Purchase and Supply......................................................... 3
2.2 Forecasts................................................................... 3
2.3 Orders...................................................................... 3
2.4 Amendment to Purchase Orders................................................ 3
ARTICLE III SUPPLY AND PROCESSING OF MATERIALS.......................................... 3
3.1 Supply of Materials......................................................... 3
3.2 Testing of TA-1............................................................. 4
3.3 Processing of Materials..................................................... 4
3.4 Product Specifications; Testing............................................. 5
3.5 FDA and Regulatory Support.................................................. 5
3.6 cGMP Compliance and QA Audits............................................... 6
3.7 Import / Export............................................................. 6
3.8 Rights to Manufacturing Processes Improvements.............................. 6
3.9 Approval for Change in Manufacturing Process................................ 7
3.10 Compliance with Laws....................................................... 7
3.11 Documentation.............................................................. 7
3.12 Rework..................................................................... 7
3.13 Samples.................................................................... 7
3.14 Storage and Handling....................................................... 7
3
CONFIDENTIAL TREATMENT--EDITED COPY
3.15 Labels, Packaging and Shipping............................................. 7
ARTICLE IV PRICES AND PAYMENT.......................................................... 8
4.1 Price....................................................................... 8
4.2 Reimbursement............................................................... 8
4.3 Payment..................................................................... 8
ARTICLE V DELIVERY AND ACCEPTANCE....................................................... 9
5.1 Batch Records and Certificates of Analysis.................................. 9
5.2 Delivery.................................................................... 9
5.3 Acceptance and Disposition of Finished Product.............................. 9
5.4 Replacement Batch........................................................... 10
ARTICLE VI REPRESENTATIONS AND WARRANTIES.............................................. 10
6.1 Existence and Power......................................................... 10
6.2 Authorization and Enforcement of Obligations................................ 11
6.3 No Consents................................................................. 11
6.4 No Conflict................................................................. 11
6.5 Limited Warranty............................................................ 11
6.6 Remedy...................................................................... 11
ARTICLE VII INDEMNIFICATION............................................................ 12
7.1 Indemnity................................................................... 12
7.2 Expenses.................................................................... 12
ARTICLE VIII PROPRIETARY INFORMATION................................................... 13
8.1 Obligation.................................................................. 13
8.2 Definition.................................................................. 13
8.3 Exclusions.................................................................. 13
8.4 Additional Restrictions..................................................... 13
ARTICLE IX TERM; TERMINATION........................................................... 14
9.1 Term........................................................................ 14
9.2 Surviving Obligations....................................................... 14
9.3 Termination................................................................. 14
ARTICLE X ARBITRATION.................................................................. 14
10.1 Binding Arbitration........................................................ 14
10.2 Arbitration Location....................................................... 14
10.3 Language of Arbitration.................................................... 15
10.4 Governing Law.............................................................. 15
10.5 Award Enforcement.......................................................... 15
10.6 Costs...................................................................... 15
-ii-
4
ARTICLE XI MISCELLANEOUS............................................................... 15
11.1 Use of Name................................................................ 15
11.2 Recall..................................................................... 15
11.3 Independent Parties........................................................ 15
11.4 English Language........................................................... 15
11.5 Notice..................................................................... 15
11.6 Severability............................................................... 16
11.7 Waiver..................................................................... 16
11.8 Entire Agreement........................................................... 16
11.9 Nonassignability; Binding on Successors.................................... 16
11.10 Force Majeure............................................................. 16
11.11 Publicity................................................................. 16
11.12 Counterparts.............................................................. 16
11.13 Captions.................................................................. 17
11.14 Reference to Manufacturer................................................. 17
EXHIBITS:
A Specifications
B Methods
C Bulk Specifications
D Processing Fee
-iii-
5
CONFIDENTIAL TREATMENT--EDITED COPY
MANUFACTURING SERVICES AGREEMENT
THIS AGREEMENT (the "Agreement") is made and effective as of the 20th
day of April, 1998 by and between SciClone Pharmaceuticals International, Ltd.,
a corporation organized under the laws of the Cayman Islands ("Customer"),
having its principal place of business at Room 3705, Windsor House, 000
Xxxxxxxxxx Xxxx, Xxxxxxxx Xxx, Xxxx Xxxx, and ISF S.p.A., a corporation
organized under the laws of Italy ("Manufacturer"), having its principal place
of business at Xxx Xxxxxxxxx 0000,00000 Xxxx, Xxxxx (together the "Parties" or
individually, a "Party").
RECITALS
A. Customer intends to sell products containing Thymosin Alpha 1, or
TA-1 (as defined below) under the necessary registrations and permits.
B. Manufacturer has at its disposal, facilities and suitably trained
personnel to manufacture a pharmaceutical product containing TA-1 on behalf of
Customer, and Manufacturer owns or has access to the relevant know-how.
C. Customer has requested Manufacturer to carry out such manufacturing
on the conditions and terms specified herein and to supply Customer with the
resultant product.
D. Manufacturer is willing to supply Customer with the manufactured
products containing TA-1.
NOW, THEREFORE, in consideration of the foregoing premises, which are
incorporated into and made a part of this Agreement, and of the mutual covenants
which are set forth herein, the Parties hereby agree as follows:
ARTICLE I
DEFINITIONS
1.1 "Acceptance Period" shall have the meaning as set forth in Section
5.3(b).
1.2 "Affiliate" means any person, firm or corporation which, directly or
indirectly, through one or more intermediaries, controls, is controlled by, or
is under common control with, a party. "Control" means the legal or beneficial
ownership of 50% or more of the voting or equity interests or the power or right
to direct the management and affairs of the business (including acting as the
general partner of a limited partnership).
1.3 "Ampoule" shall mean an ampoule of water to be used for
reconstitution of TA-1 contained in an associated Vial set forth in the
Specifications in Exhibit A.
6
CONFIDENTIAL TREATMENT--EDITED COPY
1.4 "Customer" shall mean SciClone Pharmaceuticals International, Ltd.,
as identified above, and its Affiliates.
1.5 "Delivery Date" shall mean the date set forth in the relevant
purchase order on which Manufacturer must supply Customer with Finished Product.
1.6 "Excipient" shall mean all raw materials other than TA-1 as defined
in the Specifications set forth in Exhibit A as a constituent part of a
completed Vial or Ampoule.
1.7 "Facility" shall mean Manufacturer's manufacturing facility located
at Xxx Xxxxxxxxx 0000,00000 Xxxx, Xxxxx or any other manufacturing facility
operated by Manufacturer.
1.8 "FDA" means the United States Food and Drug Administration.
1.9 "Finished Product" shall mean TA-1 processed in accordance with the
Specifications for stability and clinical purposes, and packaged in a Vial, for
pre-clinical, clinical, commercial and distribution purposes.
1.10 "Manufacturer" shall mean ISF S.p.A., as identified above, and its
Affiliates.
1.11 "Methods" shall mean the analytical protocol utilized to determine
physical, chemical or microbiological attributes of a bulk or finished product
as set forth in Exhibit B.
1.12 "Processing" shall mean formulating, filling, lyophilizing,
inspecting and labeling TA-1 in Vials according to the Specifications; or
filling, inspecting and labeling Ampoules; or packaging Finished Product and
conducting associated inspections.
1.13 "Specifications" shall mean the procedures, test results,
requirements, standards and other data and shall include the services, as all of
the foregoing are set forth herein or attached hereto and made a part hereof as
Exhibit A, as such Exhibit may be revised from time to time upon written mutual
agreement of the Parties, with any modifications resulting in changes in
Manufacturer's cost being subject to price increases or decreases acceptable to
both Parties. The Specifications shall include the Finished Product, Excipient,
Vial and Ampoule Specifications.
1.14 "TA-1 Bulk Specifications" shall mean the specifications for bulk
TA-1 set forth on Exhibit C hereto.
1.15 "Thymosin Alpha 1" or "TA-1" shall mean the compound further
described in Exhibit C hereto.
2
7
CONFIDENTIAL TREATMENT--EDITED COPY
ARTICLE II
FORECAST, PURCHASE AND SUPPLY
2.1 Purchase and Supply. During the term of this Agreement, Customer
shall purchase and Manufacturer shall supply such quantities of Finished Product
as may be set forth on purchase orders placed by Customer and accepted by
Manufacturer under this Agreement.
2.2 Forecasts.
(a) On or before the first day of each calendar quarter of each
year during the term of this Agreement, Customer shall provide Manufacturer with
a written twelve (12) month rolling forecast of the quantities of Finished
Product which Customer expects to purchase during each of the next twelve (12)
months. The first quarter of such rolling forecast shall be binding upon
Customer; the following three quarters of such rolling forecast shall be deemed
nonbinding estimates. Further, months 1, 2 and 3 of the first quarter will
indicate good faith estimates of the quantities of Finished Product and Ampoules
needed to be supplied.
(b) Within fifteen (15) days after receipt of Customer's
forecasts, Manufacturer will provide Customer with a statement of its ability
and commitment to supply the quantities stated in the twelve (12) month
forecast.
2.3 Orders. During the term of this Agreement, Customer shall provide
Manufacturer with a quarterly firm purchase order setting forth (i) the
quantities ordered for delivery and the specified Delivery Date and (ii) the lot
numbers to be applied to such Vials and Ampoules. Customer shall place its
purchase orders no later than 45 days prior to the requested Delivery Date.
[****]. Any changes to the stated lot sizes of Vials and Ampoules shall be by
mutual written agreement of Customer and Manufacturer.
2.4 Amendment to Purchase Orders. Manufacturer will use reasonable
commercial efforts to accommodate a request to amend a purchase order to (i)
increase or decrease the number of Vials and/or associated Ampoules to be
Processed; or (ii) change the Delivery Date(s).
ARTICLE III
SUPPLY AND PROCESSING OF MATERIALS
3.1 Supply of Materials.
(a) Customer, at its expense, shall deliver or cause to be
delivered sufficient TA-1 to the Facility to manufacture the forecasted number
of Vials, at least thirty (30) days prior to the start of manufacture. The
quantity of bulk TA-1 delivered shall be 1.6 mg TA-1 per Vial.
(b) Manufacturer will be responsible for proper storage and
handling, as described in the TA-1 Bulk Specifications set forth in Exhibit C,
once Manufacturer receives the TA-1 from Customer or Customer's agent.
3
8
CONFIDENTIAL TREATMENT--EDITED COPY
(c) In the event that any bulk TA-1 does not meet the TA-1 Bulk
Specifications after testing in accordance with Section 3.2 below, Customer
shall deliver replacement TA-1 to Manufacturer at no cost to Manufacturer.
(d) After Customer and Manufacturer have determined the TA-1
meets TA-1 Bulk Specifications pursuant to Section 3.2 below, Manufacturer shall
bear all risk of loss for the TA-1, including without limitation loss due to
improper Processing, inadequate storage and theft. Notwithstanding the
foregoing, the final processing yield shall be [****] of the starting material
used.
(e) In the event that Manufacturer shall require additional TA-1
beyond the amount specified in the manufacturing process to complete any given
order of Finished Product, Manufacturer shall purchase such amounts from
Customer at a price as shown in Exhibit ____, or provide a monetary credit to
Customer against future invoices. In the event that Manufacturer fails to
produce [****] for a vial lot, Manufacturer will be responsible for the cost of
the deficiency of expected batch yield at a price as shown in Exhibit D.
(f) Manufacturer shall, at its expense, manufacture and supply,
or purchase from a third party and supply, all Excipients and Components used in
the Finished Product, and Ampoules unless excluded otherwise by Customer. All
Excipients shall meet the relevant Specifications as described in Exhibit A, as
amended or supplemented from time to time. All Excipients will be tested by
Manufacturer in accordance with quality assurance procedures provided by
Customer in the Excipient Specifications.
3.2 Testing of TA-1.
(a) [****].
(b) If the TA-1 sample fails to meet such TA-1 Bulk
Specifications, Manufacturer shall not use the TA-1 and will immediately report
the result to Customer. Manufacturer and Customer shall promptly confer to
discuss the discrepancy and determine whether the material shall be retested or
replaced or what other action to take.
3.3 Processing of Materials.
(a) Manufacturer shall Process the TA-1 in accordance with the
Specifications and all applicable laws and regulations including without
limitation current Good Manufacturing Practices ("cGMP"). Before, during and
after each Processing, Manufacturer shall monitor the Processing and Processing
environment and keep such records as all of the foregoing are required by the
Specifications and cGMP. In accordance with cGMP and during the term of this
Agreement, Manufacturer shall (i) take all steps necessary to ensure that any
Finished Product that may be produced by it pursuant to this Agreement shall be
free of cross-contamination from any other manufacturing or similar activities
and (ii) be responsible for validated cleaning and changeover procedures prior
to manufacturing any Finished Product for Customer.
4
9
CONFIDENTIAL TREATMENT--EDITED COPY
(b) Manufacturer will provide Customer with written notice of
commencement of [****] within the Manufacturer facility that can impact on
manufacture or storage of Finished Product for Customer.
(c) Customer and Manufacturer shall promptly notify each other of
any new instructions or specifications required by any regulatory agency and by
the United States Food, Drug and Cosmetic Act and of other applicable rules and
regulations which may impact the manufacturing process.
3.4 Product Specifications; Testing.
(a) Finished Products supplied hereunder will conform to the
Specifications set forth in Exhibit A (as amended from time to time by written
agreement between the Customer and Manufacturer) and such conformance will be
verified in accordance with the testing standards and procedures specified
therein. Customers and Manufacturer acknowledge that the Specifications and
testing procedures set forth in Exhibit A may need to be refined as the Parties
gain experience with the manufacture, testing and use of Finished Product.
(b) Manufacturer will test each batch of Finished Product and
supply Customer with a certificate of analysis ("Certificate of Analysis")
confirming that such batch meets the Specifications. Customer shall qualify
Manufacturer for autonomy of release according to Customer's protocol.
(c) Any out-of-specification results upon testing of Finished
Product must be investigated and documented by Manufacturer. Manufacturer will
notify Customer immediately of the results of investigation with justification
for retest, if any. Manufacturer will then confer with Customer as to what
course of action to take prior to proceeding.
(d) Future modifications may be made to the testing procedures as
requested by Customer. Customer and Manufacturer shall negotiate the cost of any
such modification.
3.5 FDA and Regulatory Support.
(a) Manufacturer agrees to establish and maintain a Production
Master File ("PMF") in accordance with industry standards, as well as any
comparable files required by authorities, and to provide Customer with letters
of access to the PMF and any other processes and procedures for Finished
Product. Manufacturer further agrees to use its best efforts to assist Customer
in obtaining any government or agency approval which may be required for the
marketing of Finished Product in any other country. Manufacturer specifically
agrees to cooperate with any inspection by or regulatory requirements of
regulatory authorities that relate to the manufacture of Finished Product for
such territories. Manufacturer shall use its best efforts to comply with such
additional requirements and shall provide Customer with prompt written notice of
whether it is able to, and will, do so. Any regulatory support by Manufacturer
shall be compensated on a per project basis.
5
10
CONFIDENTIAL TREATMENT--EDITED COPY
(b) In the event that Manufacturer is audited or inspected by any
governmental or regulatory agency, Manufacturer will provide Customer with
written notice of such audit no later than five (5) days before the proposed
audit or inspection (or if Manufacturer is not notified of such audit or
inspection within such time frame, within twenty-four hours of time Manufacturer
receives notice of such audit or inspection). Manufacturer will also provide
Customer with copies of any correspondence or reports to the extent permitted by
law, relating to such audit or inspection within five (5) days of receipt.
3.6 cGMP Compliance and QA Audits. Upon Customer's written request to
Manufacturer, Customer shall have the right to have representatives visit
Manufacturer's manufacturing facilities during normal business hours to review
Manufacturer's manufacturing operations, to have access to any relevant records
in connection with such manufacture and assess its compliance with cGMP and
quality assurance standards and to discuss any related issues with
Manufacturer's manufacturing and management personnel. Upon the written request
of Customer, Manufacturer shall supply Customer with copies of Manufacturer's
manufacturing records, including its batch records and analytical records, for
the purposes of assuring product quality and compliance with agreed-upon
manufacturing procedures and specifications. Customer acknowledges that all
copies of Manufacturer's manufacturing records shall be protected under the
confidentiality provisions of Article 8.
3.7 Import / Export.
(a) Manufacturer with assistance, if any when necessary, from
Customer or Customer's consultants shall be responsible for obtaining all
necessary approvals relating to the import of TA-1 into Italy. Manufacturer with
assistance, if and when necessary, from Customer or Customer's consultants shall
be responsible for obtaining necessary approvals for the export of Finished
Product from Italy.
(b) Customer shall be responsible for documentation relating to
importation of Finished Product into countries other than Italy.
3.8 Rights to Manufacturing, Processes and Improvements.
(a) Manufacturer shall retain ownership of all of Manufacturer's
pre-existing manufacturing processes and procedures.
(b) Know-how, trade secrets and inventions or other intellectual
property, including patent applications, patents and patentable subject matter
disclosed to Manufacturer by Customer is the sole and exclusive property of
Customer.
(c) As to any changes in Manufacturer's manufacturing processes
and procedures made with respect to manufacturing and supplying the Finished
Product for Customer (the "Improvements"), Manufacturer shall fully disclose and
provide full documentation to
6
11
CONFIDENTIAL TREATMENT--EDITED COPY
Customer for all Improvements and Customer shall be entitled to practice and use
such Improvements, [****].
3.9 Approval for Change in Manufacturing Process. Manufacturer shall
obtain Customer's prior written approval before it implements any change in the
materials, equipment, process or procedures used to manufacture Finished Product
that would constitute a change under cGMP.
3.10 Compliance with Laws. Manufacturer shall comply with regulations,
requirements and laws of any and all applicable state, provincial and local
authorities and agencies, including without limitation all laws and regulations
of such territories applicable to the transportation, storage, use, handling and
disposal of hazardous materials. Manufacturer represents and warrants to
Customer that Manufacturer has and will maintain during the term of this
Agreement all governmental permits, including without limitation health, safety
and environmental permits, necessary for the conduct of the actions and
procedures that it undertakes pursuant to this Agreement.
3.11 Documentation. Manufacturer shall keep complete, accurate and
authentic accounts, notes, data and records of the work performed under this
Agreement. Each party shall maintain complete and adequate records pertaining to
the methods and facilities used for the manufacture, processing, testing,
packing, labeling, holding and distribution of Finished Product in accordance
with the applicable laws and regulations so that the Finished Product may be
administered to humans.
3.12 Rework. Manufacturer shall not rework any batch of Finished Product
without Customer's prior written consent, which consent shall not be
unreasonably withheld.
3.13 Samples. Manufacturer shall retain samples of Finished Product for
each batch of Finished Product for a period of at least one year after
expiration of the product. The sample size shall be at least twice the size
necessary to conduct quality control testing (except for sterilization and
pyrogen testing). Upon Customer's written request, Manufacturer shall provide
Customer with up to one-half the original amount of the retained samples.
3.14 Storage and Handling. Manufacturer shall store and handle TA-1,
Excipients, Components, Finished Products and Ampoules as required by the
Specifications. In addition, Manufacturer shall take such actions as are
reasonably necessary to protect Materials and TA-1 from damage, deterioration
and theft.
3.15 Labels, Packaging and Shipping. Where Customer requests
Manufacturer to label the Finished Product or Ampoule lot:
(a) Customer shall provide Manufacturer with (i) any particular
specifications it may have with respect to labels and packaging materials and
(ii) camera-ready artwork for reproduction on the labels and packaging
materials. Such information shall include but not be
7
12
CONFIDENTIAL TREATMENT--EDITED COPY
limited to the quality, weight and color of the packaging materials and labels,
the type and colors of ink to be used in printing the labels or packaging
materials and any special requirements for the labels or packaging for the
Finished Product to be delivered to specific countries. Such information shall
also include a description of the lot number system to be used in identifying
each Vial, Ampoule and package of Finished Product.
(b) Manufacturer shall reproduce the artwork on the labels, and
packaging materials and imprint the appropriate lot number on each individual
Vial, Ampoule and package in accordance with the lot numbers designated on the
applicable purchase order. Manufacturer shall label and package all Finished
Product in accordance with the Specifications and the applicable purchase order.
(c) In the event that Customer desires to change any label, or
packaging material for all or any portion of the Finished Product, Customer
shall supply Manufacturer with new camera-ready artwork and work with
Manufacturer to coordinate the use of such new artwork on the label and/or
packaging for the relevant portion of the Finished Product.
(d) Whether the Vials are labeled or unlabelled, Manufacturer
shall package them in a box containing [****]. Whether the Ampoules are labeled
or unlabeled, Manufacturer shall package them in a box containing [****].
(e) Customer shall provide shipping instructions to Manufacturer
for Finished Product and Ampoules for each lot.
ARTICLE IV
PRICES AND PAYMENT
4.1 Price.
(a) For processing Finished Product, Customer shall pay to
Manufacturer a [****] (the "Processing Fee") which will be treated as SciClone's
standard cost. The Processing Fee covers the items and services which are
summarized in Exhibit D where shipment of Finished Product is Ex Factory the
Facility.
(b) [****].
4.2 Reimbursement. The actual amount of sales, use, excise, value added
and similar taxes, if any, levied upon the transfer of Finished Product from
Manufacturer to Customer, and which are separately stated and required to be
collected by Manufacturer, shall be reimbursable costs. Income, property,
franchise, and other business privilege-type taxes are not reimbursable by
Customer.
4.3 Payment.
8
13
CONFIDENTIAL TREATMENT--EDITED COPY
(a) Payments to Manufacturer for Finished Product shall be due
net [****] days following the date of Manufacturer's invoice, which invoice
shall be dated and issued by Manufacturer any time after Manufacturer has
delivered documentation to Customer in accordance with Section 5.1 evidencing
that the applicable batch of Finished Product conforms to Specifications.
(b) All payments to Manufacturer shall be made in U.S. dollars.
ARTICLE V
DELIVERY AND ACCEPTANCE
5.1 Batch Records and Certificates of Analysis. Prior to the delivery of
any batch of Finished Product, Manufacturer shall provide Customer with (i) a
copy of the batch records and analytical records for such batch, together with
written confirmation that such batch records have been reviewed and approved by
Manufacturer's quality assurance unit; (ii) a Certificate of Analysis; and (iii)
a quality control sample of the batch only when requested by Customer.
5.2 Delivery. Unless otherwise agreed by the parties in writing, all
shipments shall be shipped Ex Factory. Manufacturer will coordinate shipping per
Customer's instructions. Shipping freight and insurance from the factory to the
desired destination will be at Customer's expense. Manufacturer will package
Finished Product in accordance with Customer's specifications as set forth in
Section 3.15(d) unless otherwise specified by Customer.
5.3 Acceptance and Disposition of Finished Product.
(a) Customer may reject any batch which does not conform with the
manufacturing or Finished Product Specifications or with applicable
documentation and process requirements. Any such notice of rejection shall be in
writing and shall indicate the reasons for such rejection.
(b) In order to reject or put on hold delivery of a full batch of
Finished Product based on testing of a quality control sample or incomplete
documentation, Customer must give written notice to Manufacturer of Customer's
rejection of the batch within fifteen (15) days after receipt of the sample or
documentation (the "Acceptance Period"). If the 15-day time limit cannot be met,
Customer will give to Manufacturer a written request of any additional time
required, which shall not be unreasonably withheld, and the Acceptance Period
shall be deemed extended to include such additional time. Customer shall use its
best efforts to ensure that any additional time required shall not be more than
thirty (30) days. If no defects in the batch are identified by Customer based
upon an analysis of the sample or review of the documentation within the
Acceptance Period, Customer shall pay Manufacturer for such batch in accordance
with Section 4.3(a). If defects in the batch are identified by Customer based
upon an analysis of the sample or review of the documentation then Manufacturer
shall correct the defects in the batch and Customer shall pay Manufacturer for
such batch within thirty (30) days following receipt of revised documentation
and a sample of the batch (if requested by Customer in
9
14
CONFIDENTIAL TREATMENT--EDITED COPY
accordance with Section 5.3(c)) from Manufacturer evidencing that Manufacturer
has corrected such defects and the batch of Finished Product now conforms to
Specifications.
(c) After notice of rejection/hold is given, Customer shall
cooperate with Manufacturer in determining whether rejection is necessary or
justified. Manufacturer will evaluate process issues and other reasons for such
non-compliance and notify Customer in writing. Manufacturer shall notify
Customer as promptly as reasonably possible whether it accepts Customer's basis
for any rejection. Whether or not Manufacturer accepts Customer's basis for
rejection, promptly on receipt of a notice of rejection/hold of a full batch of
Finished Product, Manufacturer shall use reasonable efforts at Customer's
request to replace such rejected Finished Product by delivering to Customer
samples of such conforming Finished Product within forty-five (45) days after
Manufacturer's receipt of the bulk TA-1 and shall bear the expenses of such
replacement, including the cost of bulk TA-1 as set forth in Exhibit D. On
written agreement that the samples do meet Specifications, Manufacturer shall
release the batch for delivery to Customer.
(d) Upon written agreement regarding the disposition of any
Finished Product which fails to meet Specifications, Customer will give
Manufacturer written instructions on how to proceed. If Customer desires, such
failed Finished Product shall be destroyed at Manufacturer's cost if failure of
the Finished Product to meet Specifications was caused by Manufacturer and
Manufacturer will provide Customer with certification of such destruction.
5.4 Replacement Batch. Promptly following the rejection of any Finished
Product, Customer shall, at Manufacturer's expense, deliver bulk TA-1 to the
Facility, if the failure to meet Specifications was caused by Manufacturer. If
failure of Finished Product to meet Specifications is caused by Customer, (i)
Customer will at its expense, deliver sufficient bulk TA-1 to the Facility to
provide Customer with the amount of Finished Product originally ordered in the
rejected delivery; (ii) pay for the destruction of the non-conforming Finished
Product; and (iii) pay to Manufacturer seventy-five percent (75%) of its costs
for services performed up to the date Manufacturer discontinued manufacturing
the non-conforming Finished Product. In accordance with the terms of Section 6.6
below, Manufacturer shall Process enough of such TA-1 to deliver to Customer the
amount of Finished Product originally ordered in the rejected delivery and shall
do so as promptly as technically feasible.
ARTICLE VI
REPRESENTATIONS AND WARRANTIES
6.1 Existence and Power. Each Party hereby represents and warrants to
the other Party that such party (a) is duly organized, validly existing and in
good standing under the laws of the state in which it is organized; (b) has the
power and authority and the legal right to own and operate its property and
assets, to lease the property and assets it operates under lease, and to carry
on its business as it is now being conducted; and (c) is in compliance with all
requirements of applicable law, except to the extent that any noncompliance
would not materially adversely affect such party's ability to perform its
obligations under the Agreement.
10
15
CONFIDENTIAL TREATMENT--EDITED COPY
6.2 Authorization and Enforcement of Obligations. Each Party hereby
represents and warrants to the other Party that such party (a) has the power and
authority and the legal right to enter into the Agreement and to perform its
obligations hereunder and thereunder and (b) has taken all necessary action on
its part to authorize the execution and delivery of the Agreement and the
performance of its obligations hereunder. The Agreement has been duly executed
and delivered on behalf of such party, and constitutes a legal, valid, binding
obligation, enforceable against such party in accordance with its terms.
6.3 No Consents. Each Party hereby represents and warrants to the other
Party that all necessary consents, approvals and authorizations of all
governmental authorities and other persons required to be obtained by such party
in connection with the Agreement have been obtained.
6.4 No Conflict. Each Party hereby represents and warrants to the other
Party that the execution and delivery of the Agreement and the performance of
such party's obligations hereunder and thereunder (a) do not conflict with or
violate any requirement of applicable laws or regulations or any material
contractual obligations of such party and (b) do not materially conflict with,
or constitute a material default or require any consent under, any material
contractual obligation of such party. Manufacturer shall not in any event enter
into any agreement or arrangement with any other party that would prevent or in
any way interfere with Manufacturer's obligations pursuant to this Agreement.
6.5 Limited Warranty. Manufacturer warrants that Finished Product
delivered hereunder will (i) be manufactured by Manufacturer in accordance with
all applicable rules and regulations and cGMP, (ii) be manufactured in
accordance with the agreed-upon manufacturing procedures and (iii) conform to
the applicable Specifications set forth on Exhibit A hereto at the time of
delivery. Customer's remedies and Manufacturer's liability with respect to this
warranty are set forth below.
6.6 Remedy. Any lot of Finished Product delivered to Customer by
Manufacturer which does not conform to Specifications and is rejected by
Customer in accordance with the terms of Section 5.3 above, or is otherwise not
in compliance with the warranty made in Section 6.5, will be replaced at
Manufacturer's expense by Manufacturer as set forth in Exhibit D. If
Manufacturer has acknowledged in writing that it is unable to produce conforming
Finished Product, any sums actually paid by Customer therefor will be refunded.
The remedy of replacement or refund is available only if such nonconformance was
not caused by Customer's misuse, unauthorized modifications, neglect, improper
testing or improper storage, including without limitation storage at
inappropriate temperatures, transportation, use beyond any dating provided, by
accident, fire or other hazard.
11
16
CONFIDENTIAL TREATMENT--EDITED COPY
ARTICLE VII
INDEMNIFICATION
7.1 Indemnity.
(a) Except in the event that such claims, suits, losses, damages,
costs, fees or expenses arise or result from any negligent or wrongful act or
omission of Manufacturer or the failure of Finished Product to meet
Specifications, Customer agrees to indemnify, hold harmless and defend
Manufacturer and Manufacturer's directors, officers, employees and agents, and
the directors, officers, employees and agents of any Manufacturer parent,
subsidiary or related company (the "Manufacturer Indemnitees") from and against
any and all claims, suits, losses, damages, costs, fees and expenses resulting
from or arising out of the possession or use of Finished Product by any person
other than a Manufacturer Indemnitee, including without limiting the generality
of the foregoing any damages, losses or liabilities whatsoever with respect to
death or injury to the person or damage to property, provided that Manufacturer
provides Customer with prompt notice of any such claim and the exclusive ability
to defend (with the reasonable cooperation of Manufacturer) or settle any such
claim.
(b) In the event that such claims, suits, losses, damages, costs,
fees or expenses arise or result from any negligent or wrongful act or omission
of Manufacturer or the failure of Finished Product to meet Specifications, then
Manufacturer agrees to indemnify, hold harmless and defend Customer and
Customer's directors, officers, employees and agents, and the directors,
officers employees and agents of any Customer parent, subsidiary or related
company (the "Customer Indemnitees") from and against any and all claims, suits,
losses, damages, costs, fees and expense resulting from or arising out of its
manufacture of Finished Product, its transportation, storage, use, handling and
disposal of hazardous materials related to such manufacture, or the possession
or use of Finished Product by any person other than a Customer Indemnitee,
including without limiting the generality of the foregoing any damages, losses
or liabilities whatsoever with respect to death or injury to person or damage to
property, provided that Customer provides Manufacturer with prompt notice of any
such claim and the exclusive ability to defend (with the reasonable cooperation
of Customer) or settle any such claim.
(c) In the event that the parties cannot in good faith agree as
to the application of subsections (a) and (b) above to any particular loss or
claim, the parties may conduct separate defenses of such claim and each party
shall be relieved of its obligation to tender to the indemnifying party the
exclusive ability to defend such claim or suit as a condition of
indemnification.
7.2 Expenses. No party shall be required to pay over to another amounts
called for under this Article 7 until the final resolution of the claim, action,
suit or proceeding from which the right to such payment arose.
12
17
CONFIDENTIAL TREATMENT--EDITED COPY
ARTICLE VIII
PROPRIETARY INFORMATION
8.1 Obligation. During the term of this Agreement and for a period of
[****] thereafter, the receiving party (the "Receiving Party") shall maintain in
confidence all Proprietary Information, as defined in Section 8.2 below, and
shall not use, disclose or grant use of such Proprietary Information except as
expressly authorized in this Agreement. The Receiving Party may disclose
Proprietary Information, as authorized hereunder, only to those employees or
consultants of the Receiving Party who agree to be bound by the terms of this
Article 8. The Receiving Party shall use the strictest standard of care which is
practical to ensure that such employees do not disclose or make any unauthorized
use of Proprietary Information. The Receiving Party shall promptly notify the
Disclosing Party upon discovery of any unauthorized use or disclosure of the
Proprietary Information.
8.2 Definition. As used in this Agreement, the term "Proprietary
Information" shall mean any information, either enabling or disabling, including
the terms of this Agreement, any batch record, any purchase order or other
commercial relationship between the parties, know-how, trade secret, research,
inventions, patented or patentable subject matter, patent applications, data,
process, technique, algorithm, program, design, drawing, future development,
scientific, manufacturing, marketing, business plan, financial or personnel
matter relating to the disclosing party (the "Disclosing Party"), its present or
future products, sales, suppliers, customers, employees, investors or business,
whether in oral, written, graphic, or electronic form and whether received from
the Disclosing Party or a third party. The term "Proprietary Information" shall
include, without limitation (i) the fact that Manufacturer is a supplier to
Customer, (ii) any cost information related to the manufacture of Finished
Product, including the cost of any reagents, and (iii) the Specifications for
Finished Product, each of which has previously been disclosed to Manufacturer.
8.3 Exclusions. The term "Proprietary Information" shall not be deemed
to include information which the Receiving Party can demonstrate by competent
written proof: (i) is now, or hereafter becomes, through no act or failure to
act on the part of the Receiving Party, generally known or available; (ii) is
known by Receiving Party at the time of receiving such information as evidenced
by its records; (iii) is hereafter furnished to the Receiving Party by a third
party, as a matter of right and without restriction or disclosure; or (iv) is
the subject or a written permission to disclose provided by the Disclosing
Party. Further, the obligations of confidentiality under this Article 8 shall
not apply to the extent that the Receiving Party is required to disclose
information in support of a product approval application or by an order or
regulation of a governmental agency or in the course of litigation, provided
that in all cases the Receiving Party shall give the other party prompt notice
of the pending disclosure and shall seek an order maintaining the
confidentiality of the information.
8.4 Additional Restrictions. During the term of this Agreement,
Manufacturer agrees that it will not provide the Finished Product to any party
other than Customer, except with
13
18
CONFIDENTIAL TREATMENT--EDITED COPY
written approval of the Customer.
ARTICLE IX
TERM; TERMINATION
9.1 Term. This Agreement will be effective for a period of [****] from
and after the Effective Date and may be extended upon the mutual, written
agreement of Customer and Manufacturer (the initial term and any extension
thereof being collectively referred to as the "Term" hereof).
9.2 Surviving Obligations. Expiration of this Agreement shall not (a)
affect any other rights of any Party which may have accrued up to the date of
such expiration or (b) relieve Customer of its obligation to pay Manufacturer
sums due in respect of product delivered prior to expiration of this Agreement,
and the costs (i.e., labor, packaging materials, excipients, etc.) incurred by
Manufacturer to satisfy customer orders received before the expiration of this
Agreement. The provisions of Sections 3.5, 3.6, 3.8, 3.11, 3.13, 6.5 and 6.6 and
Articles 7, 8, 10 and 11 shall survive the termination or expiration of this
Agreement.
9.3 Termination. In the event Manufacturer or Customer commits a
material breach of its obligations under this Agreement, and said breach is not
cured within thirty (30) days after receipt of a written notice specifying said
breach, then the non-breaching Party may terminate this Agreement upon delivery
to the breaching Party of a written notice of termination prior to the breach
being cured.
ARTICLE X
ARBITRATION
10.1 Binding Arbitration. Any and all disputes, controversies,
differences, claims or the like between the parties under, arising out of or
related to this Agreement, or the performance, enforcement, breach, termination
or validity of this Agreement (collectively, "Disputes") which cannot be
resolved by mutual agreement among the executives of the Parties shall be
submitted to final and binding arbitration in accordance with the terms of this
Agreement. Any situation not expressly covered by this Agreement shall be
decided in accordance with the American Arbitration Association ("AAA") Rules in
force on the Effective Date. The arbitration shall be commenced when one party
serves the other with a written demand to arbitrate.
10.2 Arbitration Location. Any arbitration initiated by a written demand
of Manufacturer shall be conducted in San Francisco, San Mateo or Santa Xxxxx
County, California, U.S.A. Any arbitration initiated by the written demand of
Customer shall be conducted in Rome. The Parties consent to the personal
jurisdiction of the courts in each such location for any cause arising out of or
otherwise related to this arbitration, its conduct and its enforcement.
14
19
10.3 Language of Arbitration. Any arbitration in the U.S.A. shall be
conducted in the English language and documents and submissions shall be in the
English language. Any arbitration in Italy shall be conducted in the Italian
language.
10.4 Governing Law. The performance, enforcement, breach or termination
of this agreement and any remedies relating thereto, shall be governed by and
construed under the substantive laws of the jurisdiction where the arbitration
is to be held, without regard to conflicts of law rules.
10.5 Award Enforcement. Each Party agrees to abide by the award rendered
in any arbitration conducted pursuant to this Article 10 and agrees that the
courts may award full faith and credit to such judgment in order to enforce such
award.
10.6 Costs. Each Party shall bear its own legal fees, including costs
and expenses.
ARTICLE XI
MISCELLANEOUS
11.1 Use of Name. No right, express or implied, is granted by this
Agreement to any Party to use in any manner the name of the other or any other
trade name or trademark of the other in connection with the performance of this
Agreement.
11.2 Recall. In the event that Finished Product is recalled or that
Customer is required to disseminate information regarding such Finished Product,
Customer shall so notify Manufacturer and, not later than may be required to
permit Customer to meet such obligations, Manufacturer shall provide Customer
with such assistance in connection with such recall as may reasonably be
requested by Customer.
11.3 Independent Parties. The Parties are not employees or legal
representatives of the other Parties for any purpose. No Party shall have the
authority to enter into any contracts in the name of or on behalf of any other
Party.
11.4 English Language. This Agreement has been prepared in the English
language and the English language shall control its interpretation.
11.5 Notice. All notices required or permitted to be given under this
Agreement shall be in writing and deemed to have been received upon the earlier
of confirmation of actual receipt and may be sent by (a) hand delivery; (b)
overnight courier, or (c) confirmed telecopy, in each case addressed to the
address first set forth above, with a copy of all notices for Customer delivered
to SciClone Pharmaceuticals, International, Ltd., 000 Xxxxxxxx Xxxxxx Xxxxxxxxx,
Xxx Xxxxx, Xxxxxxxxxx 00000, Attn: [****].
15
20
CONFIDENTIAL TREATMENT--EDITED COPY
11.6 Severability. In the event any provision of this Agreement is held
to be invalid or unenforceable, the valid or enforceable portion thereof and the
remaining provisions of this Agreement will remain in full force and effect.
11.7 Waiver. Any waiver (express or implied) by any Party of any breach
of this Agreement shall not constitute a waiver of any other or subsequent
breach.
11.8 Entire Agreement. This Agreement and the exhibits attached hereto,
constitute the entire, final, complete and exclusive agreement between the
Parties and supersede all previous agreements or representations, written or
oral, with respect to the subject matter of this Agreement. All information to
be kept confidential under any earlier agreements between any Party to this
agreement as of the Effective Date shall be maintained by the receiving party
under the obligations set forth in Article 8 of this Agreement. This Agreement
may not be modified or amended except in a writing signed by a duly authorized
representative of Customer and Manufacturer. THE TERMS AND CONDITIONS SET FORTH
HEREIN CONSTITUTE THE FINAL, COMPLETE, EXCLUSIVE AND ENTIRE AGREEMENT BETWEEN
CUSTOMER AND MANUFACTURER WITH RESPECT TO THE SUBJECT MATTER HEREOF. ANY TERM OR
CONDITION IN ANY ORDER, CONFIRMATION OR OTHER DOCUMENT FURNISHED BY CUSTOMER OR
MANUFACTURER WHICH IS IN ANY WAY INCONSISTENT WITH THE TERMS SET FORTH HEREIN IS
HEREBY EXPRESSLY REJECTED.
11.9 Nonassignability; Binding on Successors. This Agreement shall not
be assignable by Customer or Manufacturer without the written consent of the
other. This Agreement shall be binding upon, and inure to the benefit of, the
successors, executors, heirs, representatives, administrators and assigns of the
parties hereto.
11.10 Force Majeure. No Party shall be liable to the other for its
failure to perform any of its obligations under this Agreement, except for
payment obligations, during any period in which such performance is delayed or
does not occur because such performance is rendered impracticable or impossible
due to circumstances beyond its reasonable control, including without limitation
earthquakes, governmental or regional regulation, fire, flood, labor
difficulties, strikes, interruption of supply of key raw materials, civil
disorder, and acts of god, provided that the party experiencing the delay
promptly notifies the other Party of the delay.
11.11 Publicity. No Party will make any announcement or other public
statement concerning the existence and terms of this Agreement without the
consent of the other Party, excepting only for such disclosures as may be
required by applicable law.
11.12 Counterparts. This Agreement may be executed in counterparts with
the same force and effect as if each of the signatories had executed the same
instrument. Signatures may be transmitted by facsimile telecopier.
16
21
CONFIDENTIAL TREATMENT--EDITED COPY
11.13 Captions. The Parties agree that the headings in this Agreement
are used for the convenience of the Parties only and are not intended to be used
in the interpretation of the Agreement.
11.14 Reference to Manufacturer. To the extent required by law, Finished
Product shall be marketed with label or packaging reference to Manufacturer as
manufacturer.
IN WITNESS WHEREOF, the Parties have executed this Agreement
effective on the date first set forth above.
CUSTOMER:
SCICLONE PHARMACEUTICALS INTERNATIONAL LIMITED
By:
---------------------------------------
Title:
---------------------------------------
MANUFACTURER:
ISF S.p.A.
By: By:
------------------------------ -------------------------------
[****] [****]
Title: [****] Title: [****]
17
22
CONFIDENTIAL TREATMENT--EDITED COPY
EXHIBIT D
PROCESSING FEE
QUANTITY (VIALS) UNLABELLED LABELED
---------------- ---------- -------
[****] [****] [****]
--------------------------------- ------------------------------- -------------------------------
[****] [****] [****]
--------------------------------- ------------------------------- -------------------------------
> [****] [****] [****]
Other terms associated with the above pricing are:
[****]
[****]
[****]
[****]
[****]
[****]
[****]
[****]
18