PORTIONS OF THIS AGREEMENT AND ITS EXHIBITS HAVE BEEN OMITTED AND FILED
SEPARATELY PURSUANT TO A REQUEST FOR CONFIDENTIAL TREATMENT
TIDEL DISTRIBUTOR AGREEMENT
Basic Terms ("Basic Terms")
Part I
General
1. Parties. The Tidel Distributor Agreement ("Agreement") is entered into by
and between ATM Financial Corp., a Nevada corporation, having its principal
place of business at suite 3400, 000 Xxxxxxx Xxxxxx, Xxxxxxxxx, Xxxxxxx
Xxxxxxxx X0X 0X0 ("Distributor") and Tidel Engineering, L.P., a Delaware
limited partnership, having its principal place of business at 0000
XxXxxxxx Xxxxx, Xxxxxxxxxx, Xxxxx 00000.
2. Date. The Agreement will be effective upon execution of the Agreement by
the last of the parties hereto to execute the Agreement.
3. Incorporated Sections. The attached Sections I through XXII are
incorporated herein in their entirety.
4. Controlling Agreement. In the event of a conflict between any term or
provision of these Basic Terms and the attached Sections I through XXII,
the terms and provisions of these Basic Terms shall control.
Part II
Distributor Representations, Warranties and Covenants
(complete all blanks)
5. Distributor hereby represents, warrants and covenants to Tidel as follows:
A. Distributor is a corporation.
B. Distributor is duly organized, existing and in good standing under the
laws of the State of Nevada.
C. Distributor is qualified to do business in the Province of British
Columbia.
D. Distributor's organizational identification number (charter number) is
C30988-02.
E. Distributor's tax identification number (or social security number if
Distributor is an individual) is 00-0000000.
F. Distributor's principal place of business is Vancouver, British
Columbia.
G. The Product and proceeds thereof, as well as the accounts receivable
records of Distributor, will be kept at the location(s), in the City
of Vancouver, Province of British Columbia, Country of Canada set
forth below:
(i) The Product will be kept at the following location(s):
0000-000 Xxxxxxx Xxxxxx, Xxxxxxxxx, Xxxxxxx Xxxxxxxx X0X 0X0
(ii) Distributor's records of its proceeds and accounts receivable
relating to the Collateral (as defined in the Agreement),
including without limitation, the Product, will be kept at the
following location(s): 3400 - 000 Xxxxxxx Xxxxxx, Xxxxxxxxx,
Xxxxxxx Xxxxxxxx X0X 0X0
(iii) Distributor's depository account for cash proceeds will be kept
at the following location(s):
Account Number: *
Address: HSBC, 000 Xxxx Xxxxxxx Xxxxxx, Xxxxxxxxx, Xxxxxxx
Xxxxxxxx X0X 0X0
* Omitted and filed separately pursuant to a request for confidential treatment
6. Notice Addresses. Addresses for notice shall be as follows, unless written
notice of a changed address is delivered to the other party hereto, in
accordance with the terms of the Agreement:
For Distributor: ATM Financial Corp.
0000-000 Xxxxxxx Xxxxxx
Xxxxxxxxx, XX X0X 0X0
Attention: Xxxxxx Xxxxx
President
Phone: (000) 000-0000
Fax: (000) 000-0000
For Tidel: Tidel Engineering, L.P.
0000 XxXxxxxx Xxxxx
Xxxxxxxxxx, Xxxxx 00000
Attention: Mr. Xxxxxxx Xxxxxx
Executive Vice President and C.O.O.
Phone: 000.000.0000
Fax: 000.000.0000
7. Additional Addendum. The following Addendum is hereby attached and
incorporated into the Agreement: (Check if applicable)
Part III
Selection of Warranties
8. (Check Only Those Warranties That Apply)
The following are the only warranties provided by Tidel. Each of these
warranties is subject to the disclaimers, limitations, and exclusions set
forth elsewhere in this Agreement
X LIMITED WARRANTY/TIDEL ATM:
Tidel hereby warrants to the BUYER only, subject to the conditions herein
below set forth, that should the Tidel Automated Teller Machine ("ATM"),
exclusive of the ATM Chameleon or Model 3800, prove defective by reason of
improper workmanship or materials, Tidel will repair or replace with new or
factory reconditioned, all necessary electrical, electronic and mechanical
parts, without a charge for the labor for a period of 90 days and without a
charge for parts for a period of 18 months after the original installation
of the ATM. (This warranty only applies to the ATM units installed within
the Continental United States. The warranty for units installed outside
the Continental United States may differ. Contact your local sales
representative for details.) In no event shall the parts warranties given
hereunder extend for more than 24 months after the date the ATM has been
shipped from Tidel's factory. Parts considered consumable (such as printer
ribbons, diskettes, paper and cards) are not warranted, except to the
extent that these items are shipped in new, proper working condition from
Tidel in Carrollton, Texas. The remedy described above shall be the
EXCLUSIVE remedy for breach of this warranty and breach of contract.
() LIMITED WARRANTY CHAMELEON:
Tidel warrants to the BUYER only, subject to the conditions herein below
set forth, that should the Tidel Automated Teller Machine Chameleon ("ATM")
or the Model 3800 prove defective by reason of improper workmanship or
materials, Tidel will repair or replace with new or factory reconditioned,
all necessary electrical, electronic and mechanical parts, without a charge
for (i) the parts for a period of one (1) year after the original
installation of the ATM; and (ii) the labor for a period of 90 days after
the original installation of the ATM. (This warranty only applies to ATM
units installed within the Continental United States. The warranty for
units installed outside the Continental United States may differ. Contact
your local sales representative for details.) In no event shall the
warranties given hereunder, extend for more than 18 months after the date
the ATM has been shipped from Tidel's factory. Parts considered consumable
(such as printer ribbons, diskettes, paper and cards) are not warranted,
except to the extent that these items are shipped in new, proper working
condition from Tidel in Carrollton, Texas. The remedy described above
shall be the EXCLUSIVE remedy for breach of this warranty and breach of
contract.
() LIMITED WARRANTY FOR THE TACC IIa:
Tidel warrants to the BUYER only, subject to the conditions herein below
set forth, that should the Tidel Timed Access Cash Controller IIa ("TACC"),
prove defective by reason of improper workmanship or materials, Tidel will
repair or replace with new or factory reconditioned, all necessary
electrical, electronic and mechanical parts, without a charge for the parts
or the labor for a period of two (2) years after the original installation
of the TACC. (This warranty only applies to TACC units installed within
the Continental United States. The warranty for units installed outside
the Continental United States may differ. Contact your local sales
representative for details.) In no event shall the warranties given
hereunder, extend for more than 30 months after the date the TACC has been
shipped from Tidel's factory. Parts considered consumable (such as printer
ribbons and paper, dipsticks, vend tubes, and envelopes) are not warranted,
except to the extent that these items are shipped in new, proper working
condition from Tidel in Carrollton, Texas. The remedy described above
shall be the EXCLUSIVE remedy for breach of this warranty and breach of
contract.
() LIMITED WARRANTY FOR THE TACC Cii and TACC IV:
Tidel warrants to the BUYER only, subject to the conditions herein below
set forth, that should the Tidel Timed Access Cash Controller Cii or IV
("TACC") prove defective by reason of improper workmanship or materials,
Tidel will repair or replace with new or factory reconditioned, all
necessary electrical, electronic and mechanical parts, without a charge for
the parts or the labor for a period of one (1) year after the original
installation of the TACC. (This warranty only applies to TACC units
installed within the Continental United States. The warranty for units
installed outside the Continental United States may differ. Contact your
local sales representative for details.) In no event shall the warranties
given hereunder, extend for more than 18 months after the date the TACC has
been shipped from Tidel's factory. Parts considered consumable (such as
printer ribbons and paper, diskettes, vend tubes, and envelopes) are not
warranted, except to the extent that these items are shipped in new, proper
working condition from Tidel in Carrollton, Texas. The remedy described
above shall be the EXCLUSIVE remedy for breach of this warranty and breach
of contract.
() LIMITED PARTS WARRANTY:
Tidel hereby warrants to the BUYER only, subject to the conditions herein
below set forth, that should the replacement parts for the Tidel Automated
Teller Machine ("ATM") and/or Timed Access Cash Controller ("TACC") prove
defective by reason of improper workmanship or materials, Tidel will repair
or replace with new or factory reconditioned, all such replacement parts,
without a charge for the parts or labor for a period of ninety (90) days
after the original installation of such ATM and/or TACC replacement part.
(This warranty only applies to the ATM and/or TACC units installed within
the Continental United States. The warranty for units installed outside
the Continental United States may differ. Contact your local sales
representative for details.) Parts considered consumable (such as printer
ribbons, diskettes, paper and cards) are not warranted, except to the
extent that these items are shipped in new, proper working condition from
Tidel in Carrollton, Texas. The remedy described above shall be the
EXCLUSIVE remedy for breach of this warranty and breach of contract.
Part IV
Service Dealer Appointment
9. () (Optional/Check if Applicable)
If this Section is checked, the attached Section II, Service Dealer
Appointment is hereby elected by the parties hereto, and will be deemed to
be a part of the Agreement. If this Section is not checked, the attached S
ection II, Service Dealer Appointment is not elected by the parties, and
will not be deemed to be a part of the Agreement.
Part V
Territory
10. X (Optional/Check if Applicable - International Only)
Distributor's non-exclusive territory ('Territory") is British Columbia.
SECTION I. APPOINTMENT OF DISTRIBUTOR
1.01 Subject to the terms and under the conditions set forth in this
Agreement, Tidel appoints Distributor as the non-exclusive distributor for the
solicitation of orders and the selling and distribution of Product. In
connection with the appointment of the Distributor for the Product, Tidel
grants to Distributor the right to identify itself as an authorized distributor
of Tidel and to display, in the conduct of its duties, the various trademarks,
services marks and other word and design marks that Tidel uses in connection
with the Product.
1.02 By its signature to this Agreement, Distributor accepts such
appointment. Furthermore, Distributor will not solicit orders, sell or
distribute any other product or item manufactured by Tidel unless otherwise set
forth in a separate written agreement with Tidel.
SECTION II. SERVICE DEALER APPOINTMENT
2.01 In the event that this Section is checked under the Basic Terms, and
subject to the terms and under the conditions set forth in this Agreement,
Tidel additionally appoints Distributor as a non-exclusive dealer for
solicitation of orders for the support and servicing of the Product. In
connection with the appointment of Distributor as a service dealer, Tidel
grants to Distributor the right to identify itself as an authorized service
dealer of Tidel. By its signature below, Distributor accepts such appointment.
2.02 In the event this Section is checked under the Basic Terms,
Distributor shall maintain service personnel to offer installation, repair,
warranty and after-sale technical support service directly to its customers.
Distributor agrees to have all such personnel certified by Tidel. Distributor
agrees to provide training to its key personnel with respect to the
installation, programming and maintenance procedures for the Product and to
cause such key personnel to attend Tidel service training seminars as required.
SECTION III. RELATIONSHIP OF THE PARTIES
3.01 The relationship between Tidel and Distributor shall be solely that
of an independent contractor and Distributor shall in no way act as or
represent that it has the authority to act as an employee, agent, or legal
representative of Tidel for any purposes whatsoever. As an independent
contractor, Distributor shall be responsible for all costs and expenses which
it incurs in pursuing its obligations under this Agreement. Any agents or
employees of Distributor shall be agents or employees solely of Distributor and
in no circumstances shall they be agents or employees of Tidel, nor shall Tidel
in any circumstances be liable to such agents or employees or responsible for
their acts.
SECTION IV. TERM
4.01 This Agreement shall have an initial term of one (1) year, commencing
on the date hereof, subject to the conditions described herein. Thereafter,
subject to the conditions described herein, this Agreement shall continue in
effect for successive one (1) year terms in the absence of a written notice of
termination as described in Section XX, herein.
SECTION V. OBLIGATIONS OF DISTRIBUTOR
5.01 Distributor agrees to actively promote the sale of the Product
through direct sales and to maintain a mutually agreed upon inventory of the
Product and spare parts for timely delivery, sales demonstration, training and
support.
5.02 Distributor agrees to include the Product in promotional literature
and to furnish such literature, technical information and related assistance to
prospective customers. Any advertising media for the Product must be approved
by Tidel prior to publication and/or use.
5.03 Distributor, at Distributor's sole responsibility, hereby
acknowledges that all Tidel products will be installed by only certified and
authorized service personnel and/or dealer(s) who hold a currently assigned
Tidel certification number.
5.04 Distributor agrees to be solely responsible for compliance with all
state, municipal and local laws, codes, regulations, ordinances and orders
applicable to Distributor's business.
SECTION VI. OBLIGATIONS OF TIDEL
6.01 So long as Distributor has not breached any of the terms or
conditions of this Agreement, including but not limited to its obligations set
forth in the preceding Section IV, Tidel agrees to the following:
A. Tidel will use commercially reasonable efforts to supply
Distributor's requirements for the Product under the terms and conditions of
this Agreement, including, but not limited to available literature, sales aids,
and applicable price lists.
B. Tidel will offer on a periodic basis, service training seminars in
Carrollton, Texas which Distributor and its key personnel may attend at its own
expense. Tidel may, at its sole discretion, provide periodic sales support and
sales training for the Product at Distributor's location.
C. Tidel will keep Distributor informed of all modifications to the
Product and all new products which may be offered for sale by Tidel in lieu of
the Product.
SECTION VII. PRICES AND TERMS OF ORDERS
7.01 The purchase price paid by Distributor for the Product, ordered by
Distributor shall be at the prices and discounts, and subject to Tidel's
standard terms and conditions as set forth on Exhibit "B" attached hereto and
incorporated herein by reference. From time to time Distributor shall submit
purchase orders for the Product. Any terms of such purchase orders which in
any way conflict with the terms and provisions of this Agreement are of no
force and effect and the provisions of this Agreement shall in all cases
control the relationship between the parties.
7.02 Provided that Distributor has complied with the terms and conditions
of this Agreement, including without limitation Section XVIII., Security
Agreement, and at Tidel's sole discretion, Distributor's payment terms shall be
net price due within thirty (30) days from date of invoice. In the event
Distributor is late in the payment of any invoice or Distributor's credit
standing deteriorates (as determined by Tidel), Tidel may discontinue shipments
or place Distributor on a C.O.D. or prepayment basis. Interest at the rate of
the lesser of 1.5% per month or the highest rate allowed by applicable law will
be assessed for over-due accounts.
7.03 Tidel agrees to provide Distributor at least thirty (30) days prior
notice of any increase in the Distributor price of the Product.
SECTION VIII. PRODUCT SPECIFICATION CHANGES
8.01 Tidel reserves the right, without prior approval from or notice to
Distributor, to make changes in design or improvements to the Product. Tidel
is not obligated to make any such changes to the Product previously delivered
to Distributor.
SECTION IX. SOFTWARE PRODUCT LICENSE
9.01 Unless otherwise stated, Tidel grants Distributor a nontransferable,
non-exclusive license to use its software programs for the purpose of
demonstration of the Product to its customers only. The software provided by
Tidel is subject to the following provisions:
A. Tidel retains title to all software and/or firmware programs.
B. Distributor agrees not to copy, duplicate or otherwise reproduce,
disclose, sub license or sell any Tidel-supplied software and/or firmware
programs.
SECTION X. TAXES
10.01 In addition to the prices stated in Exhibit "B" attached hereto,
the Distributor agrees to pay any and all sales taxes applicable to sales of
the Product hereunder. Distributor shall also bear any personal property taxes
assessable on the Product on or after the time title to the Product passes to
Distributor.
SECTION XI. TITLE; RISK OF LOSS
11.01 Each accepted purchase order constitutes a separate sales
contract based on the prices, terms and conditions set forth in this Agreement
or as amended from time to time in accordance with this Agreement. Title to
the Product, sold under each purchase order and the risk of loss or damage to
the Product will pass from Tidel to Distributor at the time that the Product is
properly loaded on a carrier for shipment.
SECTION XII. SHIPMENT
12.01 All purchase orders shall provide for shipment of the Product,
F.O.B., Tidel's facility in Carrollton, Texas. Distributor agrees to reimburse
Tidel for all shipping costs, including insurance, within ten (10) days after
Distributor's receipt of proper bills evidencing such payments by Tidel.
SECTION XIII. CONFIDENTIAL INFORMATION
13.01 Distributor, during the term of this Agreement, shall have
access to and become familiar with various trade secrets and confidential
information of Tidel including, but not limited to, customer contracts,
customer lists, customer prospect lists, invoices, customer requirements, sales
procedures, research data, design data, marketing and pricing information and
data, marketing plans, financial information of Tidel and/or its customers, and
other technical, marketing and/or business information. This information shall
collectively be referred to as the "Confidential Information" of Tidel, and
Distributor recognizes and acknowledges that this Confidential Information
gives Tidel a competitive advantage in the industry. Distributor agrees that
he/she/it shall not use in any way or disclose to any person or entity any of
Tidel's Confidential Information, either directly or indirectly, either during
the term of this Agreement or at any time thereafter, except as required in the
course of his/her/its services under this Agreement. Distributor shall further
take reasonable precautions and act in such a manner as to ensure against
unauthorized disclosure or use of the Confidential Information. Such
information shall be promptly delivered to Tidel (without Distributor retaining
any copies) upon termination of this Agreement.
13.02 The parties to this Agreement recognize and acknowledge that the
remedy at law for a breach by either party of any of the covenants contained in
this Section XIII shall be inadequate, and each party agrees that the other
party, in addition to all remedies each may have, shall have the right to
injunctive relief to enforce the provisions of this Agreement if there is such
a breach or threatened breach.
SECTION XIV. WARRANTY
14.01 The Product sold by Tidel and purchased by Distributor under
this Agreement is covered by Tidel's standard warranties, as applicable, as
such warranties may be amended by Tidel from time to time. A copy of Tidel's
standard current warranties have been attached and incorporated into the Basic
Terms, together with the Disclaimers, Limitations, and Exclusions to Tidel's
Warranties, attached and hereby incorporated as Exhibit "C". Tidel reserves
the right to modify such warranties from time to time on prior written notice
to Distributor, and Distributor agrees to be bound by the terms of any such
amended warranties.
14.02 THE WARRANTIES REFERENCED ABOVE ARE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY REGARDING MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, RELATING TO THE USE OR PERFORMANCE OF THE
PRODUCT AND THE PARTS THEREFORE. TIDEL WILL NOT BE LIABLE FOR PERSONAL INJURY
OR PROPERTY DAMAGE (UNLESS CAUSED SOLELY BY TIDEL'S NEGLIGENCE), LOSS OF PROFIT
OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE THE PRODUCT, OR FOR ANY DAMAGES (REGARDLESS OF THEIR NATURE)
CAUSED BY THE DISTRIBUTOR'S FAILURE TO FULFILL ITS RESPONSIBILITIES AS SET
FORTH HEREIN.
14.03 Distributor shall not make any other direct or indirect
representations or warranties, expressed or implied, on behalf of Tidel. In
the event Distributor does make any such unauthorized representations or
warranties, expressed or implied, in connection with the sale, distribution or
handling of the Product, Distributor shall hold harmless and indemnify Tidel
for any expenses (including counsel fees), claims, damages, settlements or
liability of any nature whatsoever arising out of such unauthorized
representation of Distributor.
SECTION XV. LIMITATION OF REMEDIES
15.01 Tidel's liability for damages to Distributor for any cause
whatsoever, and regardless of the form of action, whether in contract or in
tort including negligence, shall be limited to the amount (including purchase
price, taxes, insurance, freight and other costs) actually paid by Distributor
to Tidel in connection with the sale of the Product which was faulty or
defective.
15.02 In no event will Tidel be liable for any damages caused by
Distributor's failure to perform Distributor's responsibilities, or for any
lost profits or savings or other consequential damages, regardless of the form
of action, whether in contract or in tort including negligence, even if Tidel
has been advised of the possibilities of such damages, or for any claim against
Distributor by any other party. Additionally, Tidel will not be liable for any
loss of funds contained in, dispensed by or associated with any Product.
15.03 Distributor hereby agrees that Tidel shall not be liable for any
acts or omissions to act on the part of Distributor, nor shall Distributor bind
or attempt to bind or obligate Tidel in any manner.
15.04 Distributor is an independent contractor and is not an agent of
Tidel. Tidel does not have authority to control the details and manner of
performance of Distributor's work. Distributor agrees that it does not have
authority to and will not hold itself out to any third party as an agent of
Tidel.
SECTION XVI. NOTICES
16.01 Any notice which may be required under this Agreement shall be
either in writing or telegraphic. Notices shall be sent to the address set
forth in the Basic Terms, or such other address of which one party shall give
written notice to the other party in accordance with the terms of this
Agreement. Any written notice shall be sent by registered mail or certified
mail, postage prepaid, return receipt requested. Telegraphic notices must be
followed within three (3) days by written notice of an authorized agent. All
such notices are considered given when such notices are properly addressed and
sent. Additionally, notices actually received, regardless of the method of
sending, shall be deemed properly received as of the date of receipt.
SECTION XVII. INSURANCE
17.01 Distributor, at its sole cost and expense, shall maintain
Business Automobile Liability Insurance for all operations of the Distributor
including owned, non-owned and hired vehicles with limits of liability of not
less than a combined single limit of $1,000,000 for bodily injury and property
damage, unless otherwise agreed to by Tidel, at its sole and complete
discretion. In addition, Distributor shall purchase and maintain during the
term of this Agreement commercial general liability insurance with limits of
$1,000,000 each occurrence and $1,000,000 general aggregate, or its equivalent.
Distributor shall also carry Worker's Compensation Insurance to the extent
required by law and regulations applicable to and covering employees of
Distributor. Tidel shall be furnished with a copy of such policies or
certificates of insurance.
17.02 In addition, all polices of insurance carried by Distributor
shall: (1) name Tidel as an additional insured (excluding worker's compensation
insurance), (2) state that coverage is primary to any insurance held by Tidel,
and (3) contain a provision that such policies of insurance cannot be canceled
except upon thirty (30) days prior written notice to Tidel.
17.03 DISTRIBUTOR AGREES TO INDEMNIFY, DEFEND AND HOLD HARMLESS TIDEL
AND ITS PARTNERS, AFFILIATES, SUBSIDIARIES, AND THEIR RESPECTIVE DIRECTORS,
OFFICERS, EMPLOYEES AND AGENTS (COLLECTIVELY THE "INDEMNIFIED PARTIES") FROM
AND AGAINST ANY CLAIMS, DEMANDS, SUITS, LIABILITIES, JUDGMENTS, SETTLEMENTS,
LOSSES AND EXPENSES, INCLUDING WITHOUT LIMITATION ATTORNEYS' FEES AND COSTS OF
LITIGATION, CAUSED BY, ARISING DIRECTLY OR INDIRECTLY OUT OF, OR IN ANY WAY
INCIDENTAL TO, OR IN CONNECTION WITH: (i) DISTRIBUTOR'S PERFORMANCE HEREUNDER;
OR (ii) ANY ACT OR OMISSION OF DISTRIBUTOR, ITS DIRECTORS, OFFICERS, AGENTS,
EMPLOYEES OR CONTRACTORS.
IT IS THE INTENTION OF THE PARTIES THAT THE INDEMNITY OBLIGATIONS SET FORTH
ABOVE ARE WITHOUT REGARD TO WHETHER THE NEGLIGENCE, FAULT, OR STRICT LIABILITY
OF AN INDEMNIFIED PARTY IS A CONCURRENT OR CONTRIBUTORY FACTOR, AND SUCH
OBLIGATIONS ARE INTENDED TO PROTECT THE INDEMNIFIED PARTIES AGAINST THE
CONSEQUENCES OF THEIR OWN NEGLIGENCE, FAULT, OR STRICT LIABILITY. ONLY THOSE
MATTERS WHICH ARE DETERMINED BY A FINAL NON-APPEALABLE JUDGMENT TO BE A RESULT
OF THE SOLE NEGLIGENCE OR FAULT OF AN INDEMNIFIED PARTY SHALL BE EXCLUDED FROM
THE INDEMNITOR'S DUTY TO INDEMNIFY THE INDEMNIFIED PARTIES.
SECTION XVIII. SECURITY AGREEMENT
18.01 Distributor hereby grants to Tidel a security interest in all of
the Product (as the term Product is defined in the Agreement) transferred, sold
or assigned to Distributor under this Agreement, any Product hereinafter
acquired by Distributor, and software license and programming used in
connection with the Product, as well as any and all accounts receivables and
proceeds from the sale or assignment of Product (collectively, the
"Collateral") to secure the payment due from Distributor to Tidel on account of
obligations incurred for the price of the Product or otherwise, presently
existing or hereafter arising, plus all costs of collection, legal expenses and
attorney's fees incurred by Tidel upon the occurrence of any default by
Distributor under the terms of the Agreement or this security agreement.
18.02 Distributor intends to also grant a purchase money security
interest in all of the Product transferred, sold or assigned to Distributor
under this Agreement, and software license and programming used in connection
with the Product, as well as any and all identifiable cash proceeds thereof, to
Tidel, to the fullest extent allowed by applicable law to secure the payment
due from Distributor to Tidel on account of obligations incurred for the price
of the Product.
18.03 Distributor shall not sell, assign, transfer or otherwise
dispose of the Collateral or any interest therein other than in the ordinary
course of Distributor's business pursuant to the terms of the Agreement and
will not otherwise do or permit anything to be done or occur that may impair
the Collateral as security hereunder. Distributor shall do such acts and
execute such documents, including additional security agreements, financing
statements, UCC-1s, renewals or other documents, as Tidel may reasonably
request, to establish and maintain in Tidel a valid security interest in the
Collateral in all jurisdictions in which the Collateral is or may be located
from time to time, including without limitation a purchase money security
interest, as applicable, free of all other liens and claims.
18.04 Distributor represents, warrants and covenants that
Distributor's true, correct and complete legal name is exactly as set forth in
the Agreement, and Distributor does not operate under any trade names or
assumed names. Distributor hereby covenants and agrees to immediately notify
Tidel in writing of any change of Distributor's name, address, principal place
of business, form of entity, state of organization, or the relocation of the
Product or Collateral. Distributor will provide Tidel with a document
identifying all existing lien or encumbrance holders and liens or encumbrances,
including all affected collateral, relating to all or any portion of the
Collateral, including but not limited to the Product, prior to shipment of
Product.
18.05 Tidel hereby retains and Distributor hereby grants to Tidel a
purchase money security interest in all of the Product transferred, sold or
assigned to Distributor under this Agreement, and software license and
programming used in connection with the Product, as well as any and all
identifiable cash proceeds thereof, to the fullest extent allowed by applicable
law, and agrees (A) to execute and deliver to Tidel, from time to time or as
otherwise requested by Tidel, any documents, instruments or writings necessary
to evidence, perfect, maintain or continue that purchase money security
interest, and (B) to perform all actions necessary to evidence, perfect,
maintain and continue the purchase money security interest retained and granted
herein.
18.06 Distributor hereby covenants and agrees that Tidel may execute
and/or file, at Tidel's option, in any UCC or other public records as Tidel
deems necessary, appropriate or convenient, in its sole and absolute
discretion, any initial financing statement or statements, and any similar
statements appropriate to the applicable jurisdiction, together with any
amendment, modification, renewal, continuation, extension, whether one or more
and from time to time, evidencing and securing the security interests set forth
in the Agreement, in form, scope and substance satisfactory to Tidel in its
sole and absolute discretion, without the signature of Distributor, to the
extent allowed by applicable law. Distributor hereby covenants and agrees that
Tidel may give notice of any such lien, execution or filing to other lien or
encumbrance holders, if any.
18.07 Any proceeds of the purchase money security interest are to be
applied to the debt owed by Distributor to Tidel in the following manner:
A. If Distributor has specified a preference delivered in writing to
Tidel, in accordance with the notice provisions of the Agreement,
then the proceeds shall be applied to the invoice specified by
Distributor according to that preference.
B. If Distributor has not specified a preference, then the proceeds
shall be applied to the oldest invoice and then to the next oldest
invoice, and so on, until the proceeds shall have been exhausted or
all of the invoices shall have been paid.
SECTION XIX. ASSIGNMENT
19.01 Distributor shall not sell, transfer, assign or otherwise
dispose of its rights and/or obligations under this Agreement except upon the
express prior written agreement of Tidel.
SECTION XX. TERMINATION
20.01 Tidel or Distributor may terminate this Agreement for any reason
upon thirty (30) days, prior written notice.
20.02 Upon the termination or expiration of this Agreement,
Distributor shall cease all use of the various trademarks, service marks and
other work and design marks of Tidel and shall thereafter duly and promptly
refer to Tidel any and all sales inquiries, orders, correspondence and the
like, whether in written or oral forms, pertaining to the Product.
20.03 Such termination shall not relieve Distributor from any
obligation under this Agreement, including but not limited to payment of any
balance due for the Product previously ordered and the obligations described
under Section XIII.
SECTION XXI. FORCE MAJEURE
21.01 Tidel shall not be responsible to Distributor for Tidel's
failure to supply the Product or any accessories or parts if same is due to
labor troubles, strikes, lockouts, fires, accidents, riots, acts of government
or public enemy, acts of God or for any other cause, including failure of a
manufacturer to deliver any component for the Product to Tidel.
SECTION XXII. GENERAL
22.01 If any provision of this Agreement shall be held to be invalid,
illegal or unenforceable, the validity, legality and enforceability of the
remaining provisions shall not be in any way be affected or impaired thereby
and each provision of this Agreement shall be valid and enforceable to the
fullest extent permitted by applicable law.
22.02 This Agreement shall be binding upon the heirs, successors and
permitted assigns of the parties.
22.03 The headings used in this Agreement are included for convenience
of the parties only and are not to be used in construing or interpreting this
Agreement.
22.04 This Agreement is governed by, and shall be construed in
accordance with, the laws of the State of Texas.
22.05 This Agreement shall not become binding or enforceable until
accepted and agreed to by Tidel as evidenced by the execution of this Agreement
by an authorized officer of Tidel.
22.06 If any action at law or in equity is necessary to enforce or
interpret the terms of this Agreement, the prevailing party shall be entitled
to recover its reasonable costs and attorneys' fees from the other party.
22.07 THIS AGREEMENT, TOGETHER WITH ANY OTHER APPLICABLE TIDEL
AGREEMENTS REFERENCING THIS AGREEMENT THAT ARE DULY SIGNED BY THE PARTIES WILL
BE THE COMPLETE AGREEMENT BETWEEN THE PARTIES, SUPERSEDING ALL PROPOSALS OR
PRIOR AGREEMENTS, ORAL OR WRITTEN, AND ALL OTHER PRIOR COMMUNICATIONS BETWEEN
THE PARTIES RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT.
IN WITNESS WHEREOF, the undersigned have executed this Agreement as of the
day and year first above written.
TIDEL ENGINEERING, L.P.
by its General Partner,
Tidel Cash Systems, Inc.
By: /s/ Xxxxxxx X. Xxxxxx
Xxxxxxx X. Xxxxxx
Executive Vice President and
Chief Operating Officer
Date: 8/24/04
ATM FINANCIAL CORP.:
By: /s/ Xxxxxx Xxxxx
Xxxxxx Xxxxx
President
Date: August 16, 2004
EXHIBIT "A"
Description of Product: A. Automated Teller Machine
ATM Models: 3100, 3400
B. Accessories, special parts and replacement parts
related to the sale, distribution and/or
operation of the ATM product lines.
EXHIBIT "B"
DISTRIBUTOR PRICING
3100
LEVEL 2
ANNUAL QUANTITY REQUIREMENT: 299 or less units/year
MODEL PRODUCT DESCRIPTION PRICE
3100 STANDARD CONFIGURATION *
- 5.7"MONOCHROME LCD DISPLAY
- MCDM DISPENSER WITH ONE (1) ENCLOSED TRAY
- INTEGRATED ATM SIGN
- 3MB TOTAL MEMORY
- STANDARD MODEM[1]
- UL 291 BUSINESS HOURS VAULT
- COMBINATION DIAL LOCK
- ENCRYPTED PIN PAD (EPP) WITH 3DES
- 80mm THERMAL GRAPHICS PRINTER
OPTIONS
ALL OPTION PRICES LISTED BELOW ARE BASED ON FACTORY INSTALLATION AT TIME OF NEW
UNIT ORDER
VIP PACKAGE *
THE VIP PACKAGE OFFERS THREE (3) OF THE MOST POPULAR UPGRADES
ON THE 3100 AT A PACKAGE SAVINGS OF $64
5.7" COLOR LCD DISPLAY
ADA VOICE GUIDANCE HARDWARE
HIGH-SPEED MODEM[1]
MCDM DISPENSER
MCDM EXPANSION MODULE WITH ONE (1) ENCLOSED TRAY *
DISPLAY *
5.7" COLOR LCD DISPLAY *
COMMUNICATION
HIGH SPEED MODEM[1] *
TCP/IP COMPATIBLE BACKPLANE[2] *
TCP/IP CONNECTIVITY SOLUTION *
VOICE GUIDANCE
ADA VOICE GUIDANCE HARDWARE *
SOFTWARE
CASHWORKS LICENSE (PER ATM) *
LOCKS
XX XXXX ELECTRONIC LOCK WITH BATTERY *
MAS XXXXXXXX (CENCON 2000) *
INTEGRATED ATM SIGN
LIGHT KIT *
EXTERNAL HIGH TOPPERS
15" STATIC BACKLIT HIGH TOPPER[4] *
15" FULL MOTION VIDEO HIGHT TOPPER WITH SOUND[4] *
SURGER SUPPRESSOR
SURGE CUPPRESSOR *
[1] Actual modem speeds may vary depending on factors
such as maximum transmission speeds accepted by
processors and the condition of phone lines.
[2] Allows for future upgrade to TCP/IP Connectivity
Solution
[3] TCP/IP Connectivity Solution requires proper
integration with a broadband network. Processors
must be capable of accepting and processing
transactions in the TCP/IP protocol for this solution
to work. Please contact your Processor for more
information on the requirements for TCP/IP
transactions.
[4] Due to occasional limits in availability and
changes in PC technology, price and lead times for
these components may change from time-to-time.
Contact your Regional Sales Manager for details.
Notes:
- Due to lead times on some non-standard items,prices and delivery schedule may
vary depending on quantities ordered. Please see your Regional Sales Manager
for details.
- Options and prices to be delivered to distributors by Tidel from time-to-time
for so long as such prices are in effect. The contents of this document are
confidential and intended for use only by the parties designated by the
appropriate Tidel representative.
* Omitted and file separately pursuant to a request for Confidential Treatment
DISTRIBUTOR PRICING
3400
LEVEL 2
ANNUAL QUANTITY REQUIREMENT: 299 or less units/year
MODEL PRODUCT DESCRIPTION PRICE
3400 STANDARD CONFIGURATION *
- 10.4" COLOR LCD DISPLAY
- TCDM DISPENSER WITH ONE (1) CASH CASSETTE
- INTEGRATED ATM SIGN
- 6MB TOTAL MEMORY
- HIGH-SPEED MODEM
- UL 291 BUSINESS HOURS VAULT
- COMBINATION DIAL LOCK
- ENCRYPTED PIN PAD (EPP) WITH 3DES
- 80mm THERMAL GRAPHICS PRINTER
- ELECTRONIC JOURNAL
- SURGE SUPPRESSOR
OPTIONS
ALL OPTION PRICES LISTED BELOW ARE BASED ON FACTORY
INSTALLATION AT TIME OF NEW UNIT ORDER
CABINET
XX 000 XXXXX 0 XXXXX *
CASH DISPENSERS & CASSETTES
TCDM
TCDM EXPANSION MODULES
1ST EXPANSION MODULE WITH ONE (1) CASSETTE *
2ND & 3RD EXPANSION MODULES WITH ONE (1) CASSETTE (EACH) *
ADDITIONAL TCDM CASH CASSETTE (CASSETTE ONLY) *
TCDM CASH CASSETTE LOCKING KIT (PER CASSETTE) *
FUJITSU
FUJITSU F-100 DISPENSER WITH ONE (1) CASH CASSETTE *
(Option in place of standard TCDM dispenser)
FUJITSU EXPANSION MODULE (UPGRADE TO F-400) *
(Required for adding additional Fujitsu cash cassettes)
FUJITSU FEED MODULE WITH ONE (1) CASH CASSETTE *
ADDITIONAL FUJITSU CASH CASSETTE (CASSETTE ONLY) *
FUJITSU CASH CASSETTE LOCKING KIT (PER CASSETTE) *
MCDM
MCDM DISPENSER WITH ONE (1) ENCLOSED TRAY *
(Option in place of standard TCDM dispenser)
MCDM EXPANSION MODULE WITH ONE (1) ENCLOSED TRAY *
SOFTWARE
CASHWORKS LICENSE (PER ATM) *
COMMUNICATION
OPTIONS ONLY AVAILABLE AS FACTORY INSTALLED AT TIME OF NEW UNIT ORDER
TCP/IP COMPATIBLE BACKPLANE *
(ALLOWS FOR FUTURE UPGRADE TO TCP/IP CONNECTIVITY SOLUTION)
TCP/IP CONNECTIVITY SOLUTION *
(ALLOWS FOR TCP/IP ATM COMMUNICATION)
LOCKS
XX XXXX ELECTRONIC LOCK WITH BATTERY *
MAS XXXXXXXX (CENCON 2000) *
INTEGRATED ATM SIGN
LIGHT KIT *
EXTERNAL HIGH TOPPERS
15" STATIC BACKLIT HIGH TOPPER[4] *
15" FULL MOTION VIDEO HIGHT TOPPER WITH SOUND *
- TCP/IP Connectivity Solution requires proper integration with a broadband
network. Processors must be capable of accepting and processing transactions
in the TCP/IP protocol for this solution to work. Please contact your
Processor for more information on the requirements for TCP/IP transactions.
- Due to lead times on some non-standard items, prices and delivery schedule
may vary depending on quantities ordered. Please see your Regional Sales
Manager for details.
- Options and prices to be delivered to distributors by Tidel from time-to-time
for so long as such prices are in effect. The contents of this document are
confidential and intended for use only by the parties designated by the
appropriate Tidel representative.
* Omitted and file separately pursuant to a request for Confidential Treatment
EXHIBIT "C"
Disclaimers, Limitations and Exclusions to Tidel's Warranties
A. DISCLAIMERS OF WARRANTIES
THIS LIMITED WARRANTY EXCLUDES ALL OTHER REMEDIES OR WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, WHETHER OR NOT PURPOSES OR SPECIFICATIONS ARE DESCRIBED
HEREIN. TIDEL FURTHER DISCLAIMS ANY RESPONSIBILITY WHATSOEVER TO YOU OR TO
ANY OTHER PERSON FOR INJURY TO PERSON OR DAMAGE TO OR LOSS OF PROPERTY OR
VALUE CAUSED BY ANY PRODUCT OR PARTS WHICH HAVE BEEN SUBJECTED TO MISUSE,
ABUSE, NEGLIGENCE, OR ACCIDENT; MISAPPLIED; OR USED IN VIOLATION OF PRODUCT
MANUALS, INSTRUCTIONS OR WARNINGS; OR MODIFIED OR REPAIRED BY UNAUTHORIZED
PERSONS; OR IMPROPERLY INSTALLED OR RELOCATED.
B. LIMITATION OF REMEDIES
It is expressly agreed between Tidel and BUYER that THE REMEDY OF REPAIR
AND REPLACEMENT IS THE EXCLUSIVE AND SOLE REMEDY OF THE BUYER. BUYER
AGREES THAT TIDEL SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, INDIRECT OR
CONSEQUENTIAL DAMAGES, such as, but not limited to, damage or loss of other
property or equipment, loss of profits or revenue, loss of savings, loss of
use of the product or associated equipment, cost of capital, cost of
purchased or replacement parts or equipment, downtime, or claims of third
parties including without limitation customers of BUYER and injury to
property. The remedies of BUYER set forth herein are EXCLUSIVE, and the
liability of Tidel with respect to any contract, or anything done in
connection therewith, such as the performance or breach thereof, or from
the manufacture, sale, delivery, resale, installation or technical direction
of installation, repair or use of any equipment or parts covered by or
furnished under this warranty, whether in contract, in tort or strict tort,
under any warranty, or otherwise, shall not, except as expressly provided
herein, exceed the price of the parts on which such liability is based.
Some states do not allow limitations on warranties, or remedies for breach
in certain transactions, or the exclusion of incidental or consequential
damages, so the limitations or exclusions set forth herein in Section B,
this Section C or otherwise, may not apply to you.
C. INSPECTION
You must inspect the product promptly after receipt and must notify Tidel
at its Carrollton, Texas office in writing of any claims, including claims
of breach of warranty and breach of contract, within thirty (30) days after
you discover or should have discovered the facts upon which the claim is
based. Your failure to give written notice of a claim within the time
period shall be deemed to be a waiver of such claim.
D. REGISTRATION
The enclosed registration card or MRT tag, as applicable, must be mailed
to: Tidel Engineering, L.P., 0000 XxXxxxxx Xxxxx, Xxxxxxxxxx, Xxxxx 00000,
within ten (10) days after the date of original installation of the ATM,
TACC, or the ATM or TACC replacement part, as applicable. WITH RESPECT TO
THE ATM AND THE TACC, IF THE ENCLOSED REGISTRATION CARD IS NOT ON FILE AT
TIDEL, THE INSTALLATION DATE WILL BE ASSUMED TO BE THIRTY DAYS AFTER THE
SHIPPING DATE.
E. WARRANTY EXCLUSIONS
The ATM and/or TACC, or any of its electrical, electronic or mechanical
parts, must not have been previously installed, relocated, altered,
repaired or serviced by anyone other than an authorized service facility;
the serial number on the ATM and/or TACC or the ATM and/or TACC replacement
part, as applicable, must not have been altered or removed; the ATM and/or
TACC or the warranted parts must not have been subjected to accident,
misuse, abuse, or operated contrary to the instructions accompanying the
ATM and/or TACC. The ATM AND/OR TACC MUST BE CONNECTED TO A DEDICATED,
GROUNDED ELECTRICAL OUTLET OR TIDEL APPROVED LINE CONDITIONER. THE ATM
MUST BE CONNECTED TO A DEDICATED PHONE LINE.
F. LIMITED WARRANTY RIGHTS
This Limited Warranty gives you specific legal rights. You may also have
other rights, which may vary from state to state.
G. LIMITATIONS OF ACTIONS
No action, regardless of form, arising out of this LIMITED WARRANTY may be
commenced more than one (1) year after the cause of action has accrued,
except an action for non-payment.
For the name of your nearest Tidel service dealer
or to contact Tidel about a claim or otherwise,
contact 000-000-0000
National WATS: 1-800-678-7577
TIDEL, 0000 XxXxxxxx Xxxxx, Xxxxxxxxxx, Xxxxx 00000
