----------------------------------------------------------------------------------------------------------------------------
AWARD CONTRACT THIS CONTRACT IS A [ILLEGIBLE] [ILLEGIBLE] Illegible
UNDER OPAS [ILLEGIBLE] DO-A1 1 72
----------------------------------------------------------------------------------------------------------------------------
2. CONTRACT Illegible NO. 3. EFFECTIVE DATE 4. ACQUISITION/PURCHASE, REQUEST/PROJECT NO.
DTCG38-95-D-20018 See Block 20C 4152-IG20
----------------------------------------------------------------------------------------------------------------------------
5. ISSUED BY CODE Z50100 6. ADMINISTERED BY (IF OTHER THAN ITEM 5) CODE
--------- ---------
USCG Aircraft Repair and Supply Center
Xxxxxxxxx Xxxx, XX 00000-0000
ATTN: HH65A Contract Section
----------------------------------------------------------------------------------------------------------------------------
7. NAME XXX XXXXXXX XX XXXXXXXXXX (XX., XXXXXX, XXXX, XXXXXX, XXXXX AND ZIP CODE) 8. DELIVERY
Destination
HAWKER PACIFIC INC. / / FOB ORIGIN / / OTHER (SEE BELOW)
00000 Xxxxxxx Xxx ------------------------------------
Xxx Xxxxxx, XX 00000 9. DISCOUNT FOR PROMPT PAYMENT
Net 30
------------------------------------
10. SUBMIT INVOICES ITEM
(4 COPIES UNLESS OTHER-
--------------------------------------------------------------------------------------- WISE SPECIFIED) TO THE
CODE 53583 FACILITY CODE ADDRESS SHOWN IN: Section G
-----------------------------------------------------------------------------------------------------------------------------
11. SHIP TO/XXXX FOR CODE 12. PAYMENT WILL BE MADE BY CODE
------------- ----------
As specified in Section F As specified in Section G
----------------------------------------------------- -----------------------------------------------------------------
13. AUTHORITY FOR USING OTHER THAN FULL AND OPEN 14. ACCOUNTING AND APPROPRIATION DATA
COMPETITION:
/X/ 10 U.S.C. 2304(c)( ) / / 41 U.S.C. 253(c)( ) As specified on individual delivery orders
-----------------------------------------------------------------------------------------------------------------------------
15A. ITEM NO. 15B. SUPPLIES/SERVICES 15C. QUANTITY 15D. UNIT 15E. UNIT PRICE 15F. AMOUNT
-----------------------------------------------------------------------------------------------------------------------------
This document constitutes award of an indefinite-delivery indefinite-quantity
contract resulting from Solicitation DTCG38-94-R-20008, and includes items
cited in Section B of the contract.
PART IV, SECTION K of the Contractor's proposal is incorporated herein by reference.
-----------------------------------------------------------------------------------------------------------------------------
15G. TOTAL AMOUNT OF CONTRACT $ N/A
-----------------------------------------------------------------------------------------------------------------------------
16. TABLE OF CONTENTS
-----------------------------------------------------------------------------------------------------------------------------
W) SEC. DESCRIPTION PAGE(S) W) SEC DESCRIPTION PAGE(S)
-----------------------------------------------------------------------------------------------------------------------------
PART I - THE SCHEDULE PART II - CONTRACT CLAUSES
-----------------------------------------------------------------------------------------------------------------------------
x A SOLICITATION/CONTRACT FORM 1 x I CONTRACT CLAUSES 65-71
-----------------------------------------------------------------------------------------------------------------------------
x B SUPPLIES OR SERVICES AND PRICES/COSTS 2-41 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.
-----------------------------------------------------------------------------------------------------------------------------
x C DESCRIPTION/SPECS./WORK STATEMENT 42-49 x J LIST OF ATTACHMENTS 72
-----------------------------------------------------------------------------------------------------------------------------
x D PACKAGING AND MARKING 50 PART IV - REPRESENTATIONS AND INSTRUCTIONS
-----------------------------------------------------------------------------------------------------------------------------
x E INSPECTION AND ACCEPTANCE 51 K REPRESENTATIONS, CERTIFICATIONS AND
------------------------------------------------------------ OTHER STATEMENTS OF OFFERORS
x F DELIVERIES OR PERFORMANCE 52-55
-----------------------------------------------------------------------------------------------------------------------------
x G CONTRACT ADMINISTRATION DATA 56-57 L INSTRS, CONDS, AND NOTICES TO OFFERORS
-----------------------------------------------------------------------------------------------------------------------------
x H SPECIAL CONTRACT REQUIREMENTS 58-64 M EVALUATION FACTORS FOR AWARD
-----------------------------------------------------------------------------------------------------------------------------
CONTRTACTING OFFICER WILL COMPLETE ITEM 17 OR 18 AS APPLICABLE
-----------------------------------------------------------------------------------------------------------------------------
17 /x/ CONTRACTOR'S NEGOTIATED AGREEMENTS (CONTRACTOR IS RE- 18. / / AWARD (CONTRACTOR IS NOT REQUIRED TO SIGN THIS
QUIRED TO SIGN THIS DOCUMENT AND RETURN 1 COPIES TO DOCUMENT.) Your offer on Solicitation Number
ISSUING OFFICE.) Contractor agrees to furnish and ________________________________________________,
deliver all items or perform all the services set including the additions or changes made by you
forth or otherwise identified above and on any which additions or changes are set forth in full
continuation sheets for the consideration stated above, is hereby accepted as in the items listed
herein. The rights and obligations of the parties above and on any continuation sheets. This
to this contract shall be subject to and governed award consummates the contract which consists of
by the following documents: (a) this award/contract the following documents: (a) the Government's
(b) the solicitation, if any, and (c) such solicitation and your offer, and (b) this award/
provisions, representations, certifications, and contract. no further contractual document is
specifications, as are attached or incorporated by necessary.
reference herein. (ATTACHMENTS ARE LISTED HEREIN.)
-----------------------------------------------------------------------------------------------------------------------------
19A. NAME AND TITLE OF SIGNER (TYPE OR PRINT) 20A. NAME OF CONTRACTING OFFICER
XXXXXXX X. XXXXX, VICE PRESIDENT
HYDROMECHANICAL SYSTEMS
-----------------------------------------------------------------------------------------------------------------------------
19B. NAME OF CONTRACTOR 19C. DATE SIGNED 20B. XXXXXX XXXXXX XX XXXXXXX 00X. DATE SIGNED
BY /s/ Illegible BY
---------------------------------------- 20 SEPT 95 ----------------------------------
(SIGNATURE OF PERSON AUTHORIZED TO SIGN) (SIGNATURE OF CONTRACTING OFFICER)
-----------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------
THE [*] INDICATES THAT PORTIONS OF TEXT HAVE BEEN DELETED AND ARE BEING FILED
UNDER SEPARATE COVER WITH THE SECURITIES COMMISSION EXCHANGE PURSUANT TO A
REQUEST FOR CONFIDENTIAL TREATMENT.
U.S. Department Commanding Officer Aircraft Repair & Supply Center
of Transportation U.S. Coast Guard Xxxxxxxxx Xxxx, XX 00000-0000
[Logo] Staff Symbol: 0000/0000
Xxxxxx Xxxxxx Phone: (000)000-0000
Coast Guard
19 September 1995
Hawker Pacific Inc.
Attn: Xxxxx Xxxx
00000 Xxxxxxx Xxx
Xxx Xxxxxx, XX 913
Subj: SOLICITATION DTCG38-94-R-20008
Dear Xx. Xxxx:
It is requested that you review the enclosed proposed contract which is the
result of your response to the subject solicitation. Please sign the proposed
contract in Block 19, then return only the cover sheet and one copy to this
office.
The changes made from the solicitation to the proposed contract are as follows:
1. The requirement for inspection by DCMAO has been waived; therefore,
references to DCMAO have been deleted from Section C, Paragraph C-3.5 Unusual
Damage, Section E, Paragraph E-2 Inspection and Acceptance, and Section H,
Paragraph H-2 Exclusions.
2. FAR clause 52.246-15 Certificate of Conformance (APR 1984) has been
added to Section E, Paragraph E-1.
3. FAR clauses 52.215-30 Facilities Capital Cost of Money and 52.229-6
Taxes -Foreign Fixed-Price Contracts have been deleted from Section I,
Paragraph I-1.
4. Section G, Paragraph G-1 - The requirement to direct the original
Standard Form 295 to Washington, DC has been deleted. The form shall be
submitted to the address in G-1, in accordance with the delivery schedule in
Section F, F-2 Delivery Schedule.
If you have any questions concerning these changes or the proposed contract
please call Xxxxx Xxxxxx at (000)000-0000 or the undersigned at (000)000-0000.
/s/ Xxxxxx X. Xxxx
XXXXXX X. XXXX
Contracting Officer
Encl: Proposed Contract DTCG38-95-D-20018
Page 2
DTCG38-95-D-20018
PART I
SECTION B - SUPPLIES OR SERVICES AND PRICES/COSTS
B-1. CONTRACT LINE ITEMS.
The contractor shall provide all necessary parts, material, labor, tooling, test
equipment and facilities for performance of the services specified in Section C,
Statement of Work for the following components. Sea Section H, Paragraph H-6 for
specific pricing instructions.
NOTE: ALL SEPARATELY PRICED REPLACEMENT PARTS SHALL BE NEW UNLESS
OTHERWISE SPECIFIED.
BASE PERIOD:
DATE OF CONTRACT AWARD THROUGH ONE YEAR FROM DATE OF AWARD
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
1 REWORK 5 30 EA $ [*]
1620-14-459-0511
LEG, LH MAIN LG
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17975 CONTACTOR UNIT ASSY $ [*] EA
18802 UNION $ [*] EA
00000-000-00 LH HOUSING $ [*] EA
00000-000-00 LH HOUSING $ [*] EA RECOVERED IAW C-3.2.4.1
18979 SHAFT $ [*] EA
18980 SHAFT $ [*] EA
18981 SWIVEL PIN $ [*] EA
00000-000-00 XXXX $ [*] EA
19217 CABLE $ [*] EA
19828-100 FLEX HOSE $ [*] EA
20529-100 HOSE $ [*] EA
00000-000-00 SINGLE PIECE BEARING S [*] EA
Page 3
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
2 REWORK 5 40 EA $ [*]
1620-14-462-8049
LEG, RH MAIN LG
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17975 CONTACTOR UNIT ASSY $ [*] EA
18130 ROLLER $ [*] EA
18802 UNION $ [*] EA
00000-000-00 RH HOUSING $ [*] EA
00000-000-00 RH HOUSING $ [*] EA RECOVERED IAW C-3.2.4.1
18979 SHAFT $ [*] EA
18980 SHAFT $ [*] EA
18981 SWIVEL PIN $ [*] EA
00000-000-00 XXXX $ [*] EA
19217 CABLE $ [*] EA
19828-100 FLEX HOSE $ [*] EA
20529-100 HOSE $ [*] EA
00000-000-00 SINGLE PIECE BEARING $ [*] EA
3 REWORK 5 35 EA $ [*]
1620-14-459-0514
AUX LANDING GEAR
P/N 00000-000-00
OR
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT S [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
Page 4
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
4 MODIFY/REWORK 1 5 EA $ [*]
1620-14-459-0514 MODIFY TO:
AUX LANDING GEAR
P/N 00000-000-00 P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
5 MODIFY/REWORK 1 5 EA $ [*]
1620-14-386-4447 MODIFY TO:
AUX LANDING GEAR 1620-14-459-0514
P/N 00000-000-00 P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
Page 5
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
6 REWORK 3 25 EA $ [*]
1650-14-043-0964
ACTUATOR CYLINDER
P/N 19570-101
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17946 BUSHING $ [*] EA
18787-100 HOSE ASSY $ [*] EA
18788-100 HOSE ASSY $ [*] EA
18789-100 HOSE ASSY $ [*] EA
19640 BALL FITTING ASSY $ [*] EA
19645 BODY ASSY $ [*] EA
19645 BODY ASSY $ [*] EA RECOVERED IAW C-3.2.4.3
19713 BUSHING $ [*] EA
19727 PISTON $ [*] EA
19731 CLAW $ [*] EA
19870 HARNESS CABLE $ [*] EA
7 REWORK 3 8 EA $ [*]
1650-14-387-2620
ACTUATOR CYLINDER
P/N 19575-101
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
18789-100 HOSE ASSY $ [*] EA
18790-100 HOSE ASSY $ [*] EA
18791-100 HOSE ASSY $ [*] EA
19640 BALL FITTING ASSY $ [*] EA
19713 BUSHING $ [*] EA
19716-100 HOUSING ASSY $ [*] EA
19716-100 HOUSING ASSY $ [*] EA RECOVERED IAW C-3.2.4.3
19727 PISTON $ [*] EA
19731 CLAW $ [*] EA
19880 HARNESS CABLE $ [*] EA
Page 6
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
8 REWORK 3 30 EA $ [*]
OVERHAUL/MODIFY 3 30 EA $ [*]
*REPLACE LINER ONLY 3 30 EA $ [*]
1650-14-383-0795 OVERHAUL AND MODIFY TO:
PUMP, SELF REGULATING 1650-14-463-8804
P/N C24160022 P/N C24160022-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
A81953-2 END FITTING $ [*] EA
GA70926-1 SWASH PLATE ASSY $ [*] EA
GA70657-2 BLOCK ASSY $ [*] EA
*See Section C, Paragraph C-3.2.4.4.1
9 REWORK 3 35 EA $ [*]
OVERHAUL 0 10 EA $ [*]
*REPLACE LINER ONLY 1 20 EA $ [*]
1650-14-463-8804
PUMP, SELF REGULATING
P/N C24160022-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
A81953-2 END FITTING $ [*] EA
GA70926-1 SWASH PLATE ASSY $ [*] EA
GA70657-2 BLOCK ASSY $ [*] EA
*See Section C, Paragraph C-3.2.4.4.1
Page 7
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
10 MODIFY/OVERHAUL 5 38 EA $ [*]
1650-14-397-0762 MODIFY TO:
SERVO CONTROL 1650-14-451-4636
P/N SC8031-1 P/N SC8033-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
11 REWORK 1 20 EA $ [*]
OVERHAUL 0 1 EA $ [*]
1650-14-451-4636
SERVO CONTROL
P/N SC8033-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
Page 8
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
12 MODIFY/OVERHAUL 5 20 EA $ [*]
1650-14-397-0763 MODIFY TO:
SERVO CONTROL 1650-14-448-1729
P/N SC8032-1 P/N SC8034-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
801400 CUP ASSEMBLY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
607763 SWITCH $ [*] EA
13 REWORK 1 15 EA $ [*]
OVERHAUL 0 1 EA $ [*]
1650-14-448-1729
SERVO CONTROL
P/N SC8034-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
801400 CUP ASSEMBLY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
Page 9
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
UNIT
CLIN SUPPLIES/SERVICES QTY UNIT PRICE
18 LABOR RATE: UNUSUAL DAMAGE 1 LT Not separately priced
IAW Section C, Paragraph C-3.5
and Section H, Paragraph H-6
HOURLY RATE $ [*]
19 LABOR RATE: TECHNICAL SUPPORT 1 LT Not separately priced
SERVICES
IAW Section C, Paragraph C-3.7
and Section H, Paragraph H-6
HOURLY RATE $ [*]
20 LABOR RATE: PRODUCT IMPROVEMENT/ 1 LT Not separately priced
ENGINEERING CHANGE PROPOSAL
IAW Section C, Paragraph C-3.8
and Section H, Paragraph H-6
HOURLY RATE $ [*]
21 LABOR RATE: SERVICE BULLETINS 1 LT Not separately priced
IAW Section C, Paragraph C-3.10
and Section H, Paragraph H-6
HOURLY RATE $ [*]
22 PUBLICATIONS/UPDATES
IAW Section C, Paragraph C-3.12 1 LT Not separately priced
23 AVIATION COMPUTERIZED MAINTENANCE
SYSTEM (ACMS) forms IAW Section H,
Paragraph H-1 1 LT Not separately priced
24 Failure Data Report
IAM Section F, Paragraph F-4 1 LT Not separately priced
25 Replacement Parts Listing
IAW SECTION C, PARAGRAPH C-3.4 1 LT Not separately priced
26 Standard Form 294, SUBCONTRACTING
REPORT FOR INDIVIDUAL CONTRACTS
IAW FAR 52.219-9 in Section I 1 LT Not separately priced
27 Standard Form 295,
SUMMARY SUBCONTRACT REPORT
IAW FAR 52.219-9 in Section I 1 LT Not separately priced
28 Government Property Report IAW
TAR 1252.245-70 in Section I 1 LT Not separately priced
Page 10
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
OPTION YEAR ONE:
DATE OF OPTION EXERCISE THROUGH ONE YEAR FROM DATE OF OPTION
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
29 REWORK 5 30 EA $ [*]
1620-14-459-0511
LEG, LH MAIN LG
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17975 CONTACTOR UNIT ASSY $ [*] EA
18802 UNION $ [*] EA
00000-000-00 LH HOUSING $ [*] EA
00000-000-00 LH HOUSING $ [*] EA RECOVERED IAW C-3.2.4.1
18979 SHAFT $ [*] EA
18980 SHAFT $ [*] EA
18981 SWIVEL PIN $ [*] EA
00000-000-00 XXXX $ [*] EA
19217 CABLE $ [*] EA
19828-100 FLEX HOSE $ [*] EA
20529-100 HOSE $ [*] EA
00000-000-00 SINGLE PIECE BEARING $ [*] EA
Page 11
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
30 REWORK 5 40 EA $ [*]
1620-14-462-8049
LEG, RH MAIN LG
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17975 CONTACTOR UNIT ASSY $ [*] EA
18130 ROLLER $ [*] EA
18802 UNION $ [*] EA
00000-000-00 RH HOUSING $ [*] EA
00000-000-00 RH HOUSING $ [*] EA RECOVERED IAW C-3.2.4.1
18979 SHAFT $ [*] EA
18980 SHAFT $ [*] EA
18981 SNIVEL PIN $ [*] EA
00000-000-00 XXXX $ [*] EA
19217 CABLE $ [*] EA
19828-100 FLEX HOSE $ [*] EA
20529-100 HOSE $ [*] EA
00000-000-00 SINGLE PIECE BEARING $ [*] EA
31 REWORK 5 35 EA $ [*]
1620-14-459-0514
AUX LANDING GEAR
P/N 00000-000-00
OR
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING S [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
Page 12
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
32 MODIFY/REWORK 1 5 EA $ [*]
1620-14-459-0514 MODIFY TO:
AUX LANDING GEAR
P/N 00000-000-00 P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
33 MODIFY/REWORK 1 5 EA $ [*]
1620-14-386-4447 MODIFY TO:
AUX LANDING GEAR 1620-14-459-0514
P/N 00000-000-00 P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
Page 13
XXXX00-00-X-00000
X-x. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
34 REWORK 3 25 EA $ [*]
1650-14-043-0964
ACTUATOR CYLINDER
P/N 19570-101
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17946 BUSHING $ [*] EA
18787-100 HOSE ASSY $ [*] EA
18788-100 HOSE ASSY $ [*] EA
18789-100 HOSE ASSY $ [*] EA
19640 BALL FITTING ASSY $ [*] EA
19645 BODY ASSY $ [*] EA
19645 BODY ASSY $ [*] EA RECOVERED IAW C-3.2.4.3
19713 BUSHING $ [*] EA
19727 PISTON $ [*] EA
19731 CLAW $ [*] EA
19870 HARNESS CABLE $ [*] EA
35 REWORK 3 8 EA $ [*]
1650-14-387-2620
ACTUATOR CYLINDER
P/N 19575-101
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
18789-100 HOSE ASSY $ [*] EA
18790-100 HOSE ASSY $ [*] EA
18791-100 HOSE ASSY $ [*] EA
19640 BALL FITTING ASSY $ [*] EA
19713 BUSHING $ [*] EA
19716-100 HOUSING ASSY $ [*] EA
19716-100 HOUSING ASSY $ [*] EA RECOVERED IAW C-3.2.4.3
19727 PISTON $ [*] EA
19731 CLAW $ [*] EA
19880 HARNESS CABLE $ [*] EA
Page 14
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
36 REWORK 2 25 EA $ [*]
OVERHAUL/MODIFY 3 30 EA $ [*]
*REPLACE LINER ONLY 1 10 EA $ [*]
1650-14-383-0795 OVERHAUL AND MODIFY TO:
PUMP, SELF REGULATING 1650-14-463-8804
P/N C24160022 P/N C24160022-1
TEST/EVALUATION S [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
A81953-2 END FITTING $ [*] EA
GA70926-1 SWASH PLATE ASSY $ [*] EA
GA70657-2 BLOCK ASSY $ [*] EA
*See Section C, Paragraph C-3.2.4.4.1
37 REWORK 3 35 EA $ [*]
OVERHAUL 0 15 EA $ [*]
*REPLACE LINER ONLY 1 10 EA $ [*]
1650-14-463-8804
PUMP, SELF REGULATING
P/N C24160022-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
A81953-2 END FITTING $ [*] EA
GA70926-1 SWASH PLATE ASSY $ [*] EA
GA70657-2 BLOCK ASSY $ [*] EA
*See Section C, Paragraph C-3.2.4.4.1
Page 15
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
38 MODIFY/OVERHAUL 1 26 EA $ [*]
1650-14-397-0762 MODIFY TO:
SERVO CONTROL 1650-14-451-4636
P/N SC8031-1 P/N SC8033-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
39 REWORK 1 22 EA $ [*]
OVERHAUL 0 1 EA $ [*]
1650-14-451-4636
SERVO CONTROL
P/N SC8033-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
Page 16
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
40 MODIFY/OVERHAUL 2 20 EA $ [*]
1650-14-397-0763 MODIFY TO:
SERVO CONTROL 1650-14-448-1729
P/N SC8032-1 P/N SC8034-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
801400 CUP ASSEMBLY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
41 REWORK 1 15 EA $ [*]
OVERHAUL 1 5 EA $ [*]
1650-14-448-1729
SERVO CONTROL
P/N SC8034-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
801400 CUP ASSEMBLY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
Page 17
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
UNIT
CLIN SUPPLIES/SERVICES QTY UNIT PRICE
46 LABOR RATE: UNUSUAL DAMAGE 1 LT Not separately priced
IAW Section C, Paragraph C-3.5
and Section H, Paragraph H-6
HOURLY RATE $ [*]
47 LABOR RATE: TECHNICAL SUPPORT 1 LT Not separately priced
SERVICES
IAW Section C, Paragraph C-3.7
and Section H, Paragraph H-6
HOURLY RATE $ [*]
48 LABOR RATE: PRODUCT IMPROVEMENT/ 1 LT Not separately priced
ENGINEERING CHANGE PROPOSAL
ZAN Section C, Paragraph C-3.8
and Section H, Paragraph H-6
HOURLY RATE $ [*]
49 LABOR RATE: SERVICE BULLETINS 1 LT Not separately priced
IAW Section C, Paragraph C-3.10
and Section H, Paragraph H-6
HOURLY RATE $ [*]
50 PUBLICATIONS/UPDATES
IAW Section C, Paragraph C-3.12 1 LT Not separately priced
51 AVIATION COMPUTERIZED MAINTENANCE
SYSTEM (ACMS) forms IAW Section H,
Paragraph H-1 1 LT Not separately priced
52 Failure Data Report
IAW Section F, Paragraph F-4 1 LT Not separately priced
53 Replacement Parts Listing
IAW SECTION C, PARAGRAPH C-3.4 1 LT Not separately priced
54 Standard Form 294, SUBCONTRACTING
REPORT FOR INDIVIDUAL CONTRACTS
IAW FAR 52.219-9 in Section I 1 LT Not separately priced
55 Standard Form 295,
SUMMARY SUBCONTRACT REPORT
IAW FAR 52.219-9 in Section I 1 LT Not separately priced
56 Government Property Report IAW
TAR 1252.245-70 in Section I 1 LT Not separately priced
Page 18
XXXX00-00-X-00000
X-x. CONTRACT LINE ITEMS. (Cont'd)
OPTION YEAR TWO:
DATE OF OPTION EXERCISE THROUGH ONE YEAR FROM DATE OF OPTION
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
57 REWORK 5 30 EA $ [*]
1620-14-459-0511
LEG, LH MAIN LG
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17975 CONTACTOR UNIT ASSY $ [*] EA
18802 UNION $ [*] EA
00000-000-00 LH HOUSING $ [*] EA
00000-000-00 LH HOUSING $ [*] EA RECOVERED IAW C-3.2.4.1
18979 SHAFT $ [*] EA
18980 SHAFT $ [*] EA
18981 SWIVEL PIN $ [*] EA
00000-000-00 XXXX $ [*] EA
19217 CABLE $ [*] EA
19828-100 FLEX HOSE $ [*] EA
20529-100 HOSE $ [*] EA
00000-000-00 SINGLE PIECE BEARING $ [*] EA
Page 19
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
58 REWORK 5 40 EA $ [*]
1620-14-462-8049
LEG, RH MAIN LG
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17975 CONTACTOR UNIT ASSY $ [*] EA
18130 ROLLER $ [*] EA
18802 UNION $ [*] EA
00000-000-00 RH HOUSING $ [*] EA
00000-000-00 RH HOUSING $ [*] EA RECOVERED IAW C-3.2.4.1
18979 SHAFT $ [*] EA
18980 SHAFT $ [*] EA
18981 SWIVEL PIN $ [*] EA
00000-000-00 XXXX $ [*] EA
19217 CABLE $ [*] EA
19828-100 FLEX HOSE $ [*] EA
20529-100 HOSE $ [*] EA
00000-000-00 SINGLE PIECE BEARING $ [*] EA
59 REWORK 5 35 EA $ [*]
1620-14-459-0514
AUX LANDING GEAR
P/N 00000-000-00
OR
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
Page 20
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
60 MODIFY/REWORK 1 5 EA $ [*]
1620-14-459-0514 MODIFY TO:
AUX LANDING GEAR
P/N 00000-000-00 P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
61 MODIFY/REWORK 1 5 EA $ [*]
1620-14-386-4447 MODIFY TO:
AUX LANDING GEAR 1620-14-459-0514
P/N 00000-000-00 P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
Page 21
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
62 REWORK 3 25 EA $ [*]
1650-14-043-0964
ACTUATOR CYLINDER
P/N 19570-101
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17946 BUSHING $ [*] EA
18787-100 HOSE ASSY $ [*] EA
18788-100 HOSE ASSY $ [*] EA
18789-100 HOSE ASSY $ [*] EA
19640 BALL FITTING ASSY $ [*] EA
19645 BODY ASSY $ [*] EA
19645 BODY ASSY $ [*] EA RECOVERED IAW C-3.2.4.3
19713 BUSHING $ [*] EA
19727 PISTON $ [*] EA
19731 CLAW $ [*] EA
19870 HARNESS CABLE $ [*] EA
63 REWORK 3 10 EA $ [*]
1650-14-387-2620
ACTUATOR CYLINDER
P/N 19575-101
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
18789-100 HOSE ASSY $ [*] EA
18790-100 HOSE ASSY $ [*] EA
18791-100 HOSE ASSY $ [*] EA
19640 BALL FITTING ASSY $ [*] EA
19713 BUSHING $ [*] EA
19716-100 HOUSING ASSY $ [*] EA
19716-100 HOUSING ASSY $ [*] EA RECOVERED IAW C-3.2.4.3
19727 PISTON $ [*] EA
19731 CLAW $ [*] EA
19880 HARNESS CABLE $ [*] EA
Page 22
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
64 REWORK 2 25 EA $ [*]
OVERHAUL/MODIFY 3 30 EA $ [*]
*REPLACE LINER ONLY 1 15 EA $ [*]
1650-14-383-0795 OVERHAUL AND MODIFY TO:
PUMP, SELF REGULATING 1650-14-463-8804
P/N C24160022 P/N C24160022-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
A81953-2 END FITTING $ [*] EA
GA70926-1 SWASH PLATE ASSY $ [*] EA
GA70657-2 BLOCK ASSY $ [*] EA
*See Section C, Paragraph C-3.2.4.4.1
65 REWORK 3 35 EA $ [*]
OVERHAUL 1 15 EA $ [*]
*REPLACE LINER ONLY 1 15 EA $ [*]
1650-14-463-8804
PUMP, SELF REGULATING
P/N C24160022-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
A81953-2 END FITTING $ [*] EA
GA70926-1 SWASH PLATE ASSY $ [*] EA
GA70657-2 BLOCK ASSY $ [*] EA
*See Section C, Paragraph C-3.2.4.4.1
Page 23
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
66 MODIFY/OVERHAUL 1 17 EA $ [*]
1650-14-397-0762 MODIFY TO:
SERVO CONTROL 1650-14-451-4636
P/N SC8031-1 P/N SC8033-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
67 REWORK 5 21 EA $ [*]
OVERHAUL 1 20 EA $ [*]
1650-14-451-4636
SERVO CONTROL
P/N SC8033-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
Page 24
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
68 MODIFY/OVERHAUL 1 20 EA $ [*]
1650-14-397-0763 MODIFY TO:
SERVO CONTROL 1650-14-448-1729
P/N SC8032-1 P/N SC8034-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
801400 CUP ASSEMBLY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
69 REWORK 1 10 EA $ [*]
OVERHAUL 1 10 EA $ [*]
1650-14-448-1729
SERVO CONTROL
P/N SC8034-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
801400 CUP ASSEMBLY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
Page 25
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
UNIT
CLIN SUPPLIES/SERVICES QTY UNIT PRICE
74 LABOR RATE: UNUSUAL DAMAGE 1 LT Not separately priced
IAW Section C, Paragraph C-3.5
and Section H, Paragraph H-6
HOURLY RATE $ [*]
75 LABOR RATE: TECHNICAL SUPPORT 1 LT Not separately priced
SERVICES
IAW Section C, Paragraph C-3.7
and Section H, Paragraph H-6
HOURLY RATE $ [*]
76 LABOR RATE: PRODUCT IMPROVEMENT/ 1 LT Not separately priced
ENGINEERING CHANGE PROPOSAL
IAW Section C, Paragraph C-3.8
and Section H, Paragraph H-6
HOURLY RATE $ [*]
77 LABOR RATE: SERVICE BULLETINS 1 LT Not separately priced
IAW Section C, Paragraph C-3.10
and Section H, Paragraph H-6
HOURLY RATE $ [*]
78 PUBLICATIONS/UPDATES
IAW Section C, Paragraph C-3.12 1 LT Not separately priced
79 AVIATION COMPUTERIZED MAINTENANCE
SYSTEM (ACMS) forms IAW Section H,
Paragraph H-1 1 LT Not separately priced
80 Failure Data Report
IAW Section F, Paragraph F-4 1 LT Not separately priced
81 Replacement Parts Listing
IAW SECTION C, PARAGRAPH C-3.4 1 LT Not separately priced
82 Standard Form 294, SUBCONTRACTING
REPORT FOR INDIVIDUAL CONTRACTS
IAW FAR 52.219-9 in Section I 1 LT Not separately priced
83 Standard Form 295,
SUMMARY SUBCONTRACT REPORT
IAW FAR 52.219-9 in Section I 1 LT Not separately priced
84 Government Property Report IAW
TAR 1252.245-70 in Section I 1 LT Not separately priced
Page 26
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
OPTION YEAR THREE:
DATE OF OPTION EXERCISE THROUGH ONE YEAR FROM DATE OF OPTION
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
85 REWORK 5 30 EA $ [*]
1620-14-459-0511
LEG, LH MAIN LG
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17975 CONTACTOR UNIT ASSY $ [*] EA
18802 UNION $ [*] EA
00000-000-00 LH HOUSING $ [*] EA
00000-000-00 LH HOUSING $ [*] EA RECOVERED IAW C-3.2.4.1
18979 SHAFT $ [*] EA
18980 SHAFT $ [*] EA
18981 SWIVEL PIN $ [*] EA
00000-000-00 XXXX $ [*] EA
19217 CABLE $ [*] EA
19828-100 FLEX HOSE $ [*] EA
20529-100 HOSE $ [*] EA
00000-000-00 SINGLE PIECE BEARING $ [*] EA
Page 27
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
86 REWORK 5 40 EA $ [*]
1620-14-462-8049
LEG, RH MAIN LG
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17975 CONTACTOR UNIT ASSY $ [*] EA
18130 ROLLER $ [*] EA
18802 UNION $ [*] EA
00000-000-00 RH HOUSING $ [*] EA
00000-000-00 RH HOUSING $ [*] EA RECOVERED IAW C-3.2.4.1
18979 SHAFT $ [*] EA
18980 SHAFT $ [*] EA
18981 SWIVEL PIN $ [*] EA
00000-000-00 XXXX $ [*] EA
19217 CABLE $ [*] EA
19828-100 FLEX HOSE $ [*] EA
20529-100 HOSE $ [*] EA
00000-000-00 SINGLE PIECE BEARING $ [*] EA
87 REWORK 5 35 EA $ [*]
1620-14-459-0514
AUX LANDING GEAR
P/N 00000-000-00
OR
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
Page 28
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
88 MODIFY/REWORK 1 5 EA $ [*]
1620-14-459-0514 MODIFY TO:
AUX LANDING GEAR
P/N 00000-000-00 P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
89 MODIFY/REWORK 1 5 EA $ [*]
1620-14-386-4447 MODIFY TO:
AUX LANDING GEAR 1620-14-459-0514
P/N 00000-000-00 P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
Page 29
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
90 REWORK 3 25 EA $ [*]
1650-14-043-0964
ACTUATOR CYLINDER
P/N 19570-101
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17946 BUSHING $ [*] EA
18787-100 HOSE ASSY $ [*] EA
18788-100 HOSE ASSY $ [*] EA
18789-100 HOSE ASSY $ [*] EA
19640 BALL FITTING ASSY $ [*] EA
19645 BODY ASSY $ [*] EA
19645 BODY ASSY $ [*] EA RECOVERED IAW C-3.2.4.3
19713 BUSHING $ [*] EA
19727 PISTON $ [*] EA
19731 CLAW $ [*] EA
19870 HARNESS CABLE $ [*] EA
91 REWORK 3 10 EA $ [*]
1650-14-387-2620
ACTUATOR CYLINDER
P/N 19575-101
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
18789-100 HOSE ASSY $ [*] EA
18790-100 HOSE ASSY $ [*] EA
18791-100 HOSE ASSY $ [*] EA
19640 BALL FITTING ASSY $ [*] EA
19713 BUSHING $ [*] EA
19716-100 HOUSING ASSY $ [*] EA
19716-100 HOUSING ASSY $ [*] EA RECOVERED IAW C-3.2.4.3
19727 PISTON $ [*] EA
19731 CLAW $ [*] EA
19880 HARNESS CABLE $ [*] EA
Page 30
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
92 REWORK 2 25 EA $ [*]
OVERHAUL/MODIFY 3 30 EA $ [*]
*REPLACE LINER ONLY 1 15 EA $ [*]
1650-14-383-0795 OVERHAUL AND MODIFY TO:
PUMP, SELF REGULATING 1650-14-463-8804
P/N C24160022 P/N C24160022-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
A81953-2 END FITTING $ [*] EA
GA70926-1 SWASH PLATE ASSY $ [*] EA
GA70657-2 BLOCK ASSY $ [*] EA
*See Section C, Paragraph C-3.2.4.4.1
93 REWORK 3 35 EA $ [*]
OVERHAUL 1 20 EA $ [*]
*REPLACE LINER ONLY 1 20 EA $ [*]
1650-14-463-8804
PUMP, SELF REGULATING
P/N C24160022-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
A81953-2 END FITTING $ [*] EA
GA70926-1 SWASH PLATE ASSY $ [*] EA
GA70657-2 BLOCK ASSY $ [*] EA
*See Section C, Paragraph C-3.2.4.4.1
Page 31
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
94 MODIFY/OVERHAUL 1 18 EA $ [*]
1650-14-397-0762 MODIFY TO:
SERVO CONTROL 1650-14-451-4636
P/N SC8031-1 P/N SC8033-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
95 REWORK 5 20 EA $ [*]
OVERHAUL 1 20 EA $ [*]
1650-14-451-4636
SERVO CONTROL
P/N SC8033-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
Page 32
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
96 XXXXXX/XXXXXXXX 0 0 EA $ [*]
1650-14-397-0763 MODIFY TO:
SERVO CONTROL 1650-14-448-1729
P/N SC8032-1 P/N SC8034-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
801400 CUP ASSEMBLY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
97 REWORK 3 20 EA $ [*]
OVERHAUL 3 20 EA $ [*]
1650-14-448-1729
SERVO CONTROL
P/N SC8034-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
801400 CUP ASSEMBLY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
Page 33
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
UNIT
CLIN SUPPLIES/SERVICES QTY UNIT PRICE
102 LABOR RATE: UNUSUAL DAMAGE 1 LT Not separately priced
IAW Section C, Paragraph C-3.5
and Section H, Paragraph H-6
HOURLY RATE $ [*]
103 LABOR RATE: TECHNICAL SUPPORT 1 LT Not separately priced
SERVICES
IAW Section C, Paragraph C-3.7
and Section H, Paragraph H-6
HOURLY RATE $ [*]
104 LABOR RATE: PRODUCT IMPROVEMENT/ 1 LT Not separately priced
ENGINEERING CHANGE PROPOSAL
IAW Section C, Paragraph C-3.8
and Section H, Paragraph H-6
HOURLY RATE $ [*]
105 LABOR RATE: SERVICE BULLETINS 1 LT Not separately priced
IAW Section C, Paragraph C-3.10
and Section H, Paragraph H-6
HOURLY RATE $ [*]
106 PUBLICATIONS/UPDATES
IAM Section C, Paragraph C-3.12 1 LT Not separately priced
107 AVIATION COMPUTERIZED MAINTENANCE
SYSTEM (ACMS) forms IAW Section H,
Paragraph H-1 1 LT Not separately priced
108 Failure Data Report
IAW Section F, Paragraph F-4 1 LT Not separately priced
109 Replacement Parts Listing
IAW SECTION C, PARAGRAPH C-3.4 1 LT Not separately priced
110 Standard Form 294, SUBCONTRACTING
REPORT FOR INDIVIDUAL CONTRACTS
IAW FAR 52.219-9 in Section I 1 LT Not separately priced
111 Standard Form 295,
SUMMARY SUBCONTRACT REPORT
IAW FAR 52.219-9 in Section I 1 LT Not separately priced
112 Government Property Report IAW
TAR 1252.245-70 in Section I 1 LT Not separately priced
Page 34
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
OPTION YEAR FOUR:
DATE OF OPTION EXERCISE THROUGH ONE YEAR FROM DATE OF OPTION
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
113 REWORK 5 30 EA $ [*]
1620-14-459-0511
LEG, LH MAIN LG
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17975 CONTACTOR UNIT ASSY $ [*] EA
18802 UNION $ [*] EA
00000-000-00 LH HOUSING $ [*] EA
00000-000-00 LH HOUSING $ [*] EA RECOVERED IAW C-3.2.4.1
18979 SHAFT $ [*] EA
18980 SHAFT $ [*] EA
18981 SWIVEL PIN $ [*] EA
00000-000-00 XXXX $ [*] EA
19217 CABLE $ [*] EA
19828-100 FLEX HOSE $ [*] EA
20529-100 HOSE $ [*] EA
00000-000-00 SINGLE PIECE BEARING $ [*] EA
Page 35
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
114 REWORK 5 40 EA $ [*]
1620-14-462-8049
LEG, RH MAIN LG
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17975 CONTACTOR UNIT ASSY $ [*] EA
18130 ROLLER $ [*] EA
18802 UNION $ [*] EA
00000-000-00 RH HOUSING $ [*] EA
00000-000-00 RH HOUSING $ [*] EA RECOVERED IAW C-3.2.4.1
18979 SHAFT $ [*] EA
18980 SHAFT $ [*] EA
18981 SWIVEL PIN $ [*] EA
00000-000-00 XXXX $ [*] EA
19217 CABLE $ [*] EA
19828-100 FLEX HOSE $ [*] EA
20529-100 HOSE $ [*] EA
00000-000-00 SINGLE PIECE BEARING $ [*] EA
115 REWORK 5 35 EA $ [*]
1620-14-459-0514
AUX LANDING GEAR
P/N 00000-000-00
OR
P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
Page 36
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
116 MODIFY/REWORK 1 5 EA $ [*]
1620-14-459-0514 MODIFY TO:
AUX LANDING GEAR
P/N 00000-000-00 P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
117 MODIFY/REWORK 1 5 EA $ [*]
1620-14-386-4447 MODIFY TO:
AUX LANDING GEAR 1620-14-459-0514
P/N 00000-000-00 P/N 00000-000-00
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
00000-000-00 HOUSING $ [*] EA
00000-000-00 UPPER BEARING $ [*] EA
00000-000-00 BEARING POST $ [*] EA
18922 PISTON TUBE $ [*] EA
18926 LOWER BEARING $ [*] EA
18928 LEVER PISTON SHAFT $ [*] EA
00000-000-00 LOWER BEARING $ [*] EA
19010 SHAFT $ [*] EA
19324 AXLE $ [*] EA
19465 YOKE $ [*] EA
Page 37
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
118 REWORK 3 25 EA $ [*]
1650-14-043-0964
ACTUATOR CYLINDER
P/N 19570-101
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
17946 BUSHING $ [*] EA
18787-100 HOSE ASSY $ [*] EA
18788-100 HOSE ASSY $ [*] EA
18789-100 HOSE ASSY $ [*] EA
19640 BALL FITTING ASSY $ [*] EA
19645 BODY ASSY $ [*] EA
19645 BODY ASSY $ [*] EA RECOVERED IAW C-3.2.4.3
19713 BUSHING $ [*] EA
19727 PISTON $ [*] EA
19731 CLAW $ [*] EA
19870 HARNESS CABLE $ [*] EA
119 REWORK 3 10 EA $ [*]
1650-14-387-2620
ACTUATOR CYLINDER
P/N 19575-101
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
18789-100 HOSE ASSY $ [*] EA
18790-100 HOSE ASSY $ [*] EA
18791-100 HOSE ASSY $ [*] EA
19640 BALL FITTING ASSY $ [*] EA
19713 BUSHING $ [*] EA
19716-100 HOUSING ASSY $ [*] EA
19716-100 HOUSING ASSY $ [*] EA RECOVERED IAW C-3.2.4.3
19727 PISTON $ [*] EA
19731 CLAW $ [*] EA
19880 HARNESS CABLE $ [*] EA
Page 38
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
120 REWORK 1 10 EA $ [*]
OVERHAUL/MODIFY 2 30 EA $ [*]
*REPLACE LINER ONLY 1 10 EA $ [*]
1650-14-383-0795 OVERHAUL AND MODIFY TO:
PUMP, SELF REGULATING 1650-14-463-8804
P/N C24160022 P/N C24160022-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
A81953-2 END FITTING $ [*] EA
GA70926-1 SWASH PLATE ASSY $ [*] EA
GA70657-2 BLOCK ASSY $ [*] EA
*See Section C, Paragraph C-3.2.4.4.1
121 REWORK 3 35 EA $ [*]
OVERHAUL 2 30 EA $ [*]
*REPLACE LINER ONLY 1 25 EA $ [*]
1650-14-463-8804
PUMP, SELF REGULATING
P/N C24160022-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
A81953-2 END FITTING $ [*] EA
GA70926-1 SWASH PLATE ASSY $ [*] EA
GA70657-2 BLOCK ASSY $ [*] EA
*See Section C, Paragraph C-3.2.4.4.1
Page 39
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
122 XXXXXX/XXXXXXXX 0 0 EA $ [*]
1650-14-397-0762 MODIFY TO:
SERVO CONTROL 1650-14-451-4636
P/N SC8031-1 P/N SC8033-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
123 REWORK 1 30 EA $ [*]
OVERHAUL 1 30 EA $ [*]
1650-14-451-4636
SERVO CONTROL
P/N SC8033-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
Page 40
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
MIN MAX UNIT
CLIN SUPPLIES/SERVICES QTY QTY UNIT PRICE
124 XXXXXX/XXXXXXXX 0 0 EA $ [*]
1650-14-397-0763 MODIFY TO:
SERVO CONTROL 1650-14-448-1729
P/N SC8032-1 P/N SC8034-1
TEST/EVALUATION S [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
801400 CUP ASSEMBLY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
125 REWORK 3 22 EA $ [*]
OVERHAUL 3 22 EA $ [*]
1650-14-448-1729
SERVO CONTROL
P/N SC8034-1
TEST/EVALUATION $ [*] EA
SEPARATELY PRICED REPLACEMENT PARTS:
P/N NOMENCLATURE
800600 FILTER $ [*] EA
801271 BODY $ [*] EA
801400 CUP ASSEMBLY $ [*] EA
802170 CIRCUIT BOARD $ [*] EA
807763 SWITCH $ [*] EA
Page 41
DTCG38-95-D-20018
B-1. CONTRACT LINE ITEMS. (Cont'd)
UNIT
CLIN SUPPLIES/SERVICES QTY UNIT PRICE
130 LABOR RATE: UNUSUAL DAMAGE 1 LT Not separately priced
IAW Section C, Paragraph C-3.5
and Section H, Paragraph H-6
HOURLY RATE $ [*]
131 LABOR RATE: TECHNICAL SUPPORT 1 LT Not separately priced
SERVICES
IAW Section C, Paragraph C-3.7
and Section H, Paragraph H-6
HOURLY RATE $ [*]
132 LABOR RATE: PRODUCT IMPROVEMENT/ 1 LT Not separately priced
ENGINEERING CHANGE PROPOSAL
IAW Section C, Paragraph C-3.8
and Section H, Paragraph H-6
HOURLY RATE $ [*]
133 LABOR RATE: SERVICE BULLETINS 1 LT Not separately priced
IAW Section C, Paragraph C-3.10
and Section H, Paragraph H-6
HOURLY RATE $ [*]
134 PUBLICATIONS/UPDATES
IAW Section C, Paragraph C-3.12 1 LT Not separately priced
135 AVIATION COMPUTERIZED MAINTENANCE
SYSTEM (ACMS) forms IAW Section H,
Paragraph H-1 1 LT Not separately priced
136 Failure Data Report
IAW Section F, Paragraph F-4 1 LT Not separately priced
137 Replacement Parts Listing
IAW SECTION C, PARAGRAPH C-3.4 1 LT Not separately priced
138 Standard Form 294, SUBCONTRACTING
REPORT FOR INDIVIDUAL CONTRACTS
IAW FAR 52.219-9 in Section I 1 LT Not separately priced
139 Standard Form 295,
SUMMARY SUBCONTRACT REPORT
IAW FAR 52.219-9 in Section I 1 LT Not separately priced
140 Government Property Report IAW
TAR 1252.245-70 in Section I 1 LT Not separately priced
Page 42
DTCG38-95-D-20018
SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT
C-1 SCOPE.
The HH-65A components to be reworked/overhauled/modified under this contract are
not life limited. They are removed and reworked as an on condition item or at
scheduled overhaul intervals. The requirement exists to rework/overhaul/modify
unserviceable components and return them to Ready-For-Issue (RFI) condition,
provide technical support services, support product improvement efforts, modify
components per service bulletins, and provide updates to Component Maintenance
Manuals (CMM). Work under this contract shall be performed at the contractor's
facility or U. S. Coast Guard approved subcontractor facility.
C-1.1 Background. The HH-65A (Dolphin) helicopter entered the Coast Guard
inventory in 1984 as a replacement for the H-52. The search and rescue mission,
for which the HH-65A is used, is primarily around salt water, at low altitude;
therefore, the components are subject to corrosion.
C-1.2 Original Equipment Manufacturers (OEM):
CAGE OEM *ITEM
---- --- ----
F0189 Eram-Etudes Realisations 1 - 7
Accessorires Mecaniques
000 Xxx xx Xxxxx Xx Xxx
00000 Xxx Xxxxx Xxxxxx
F6137 Xxxxxxx-Hispano Bugatti 0 - 0
XX X X 000
00000 Xxxxxxxxx Cedex France
F1688 Samm/STE D Applications Des 10 - 14
Machines Motrices/SA Dpt
Xxxxxxxxxxx 000 Xxxx xx Xxxxxxxxxx
00000 Xxxx Xxx Xxxxxxxxxx Xxxxxx
F6103 D B A Div Air Equipement 15 - 17
98 Boulevard Xxxxxx Xxxx
92115 Clichy France
*Includes respective option years.
C-1.3 Precedence. In the event of conflict between OEM technical
specifications/rework procedures and other technical specifications/procedures,
the order of precedence is as follows:
C-1.3.1 Coast Guard/Aircraft Repair and Supply Center (ARSC) specifications and
procedures.
C-1.3.2 OEM specifications and procedures.
C-1.3.3 Other
Page 43
XXXX00-00-X-00000
XXXXXXX X - XXXXXXXXXXX/XXXXXXXXXXXXXX/XXXX XXXXXXXXX
C-2. APPLICABLE DOCUMENTS.
C-2.1 Industry Specifications.
C-2.1.1 OEM specifications and procedures applicable to the components listed
in Section B. NOTE: Documents are not available from the Government.
C-2.2 Military Specifications.
C-2.2.1 MIL-I-45208A, Quality Program Requirements, dated 16 Dec 63, with
Amendment 1 dated 24 Jul 81.
C-2.2.2 MIL-P-116J, Preservation Methods, dated 29 Sep 89.
C-2.3 Military Standards
C-2.3.1 MIL-STD-129M, Marking for Shipment and Storage, dated 15 Jun 93.
C-2.4 Other Military Documents.
C-2.4.1 NAVAIR 01-1A-509 (AFTO 1/1/691), Aircraft Weapons Systems Cleaning and
Corrosion Control, dated 1 Jan 92.
C-2.5 Source of Government Documents. See Section L - Instructions, Conditions
and Notices to Offerors.
C-3. REQUIREMENTS.
C-3.1 General.
C-3.1.1 The contractor shall possess a current Federal Aviation Administration
(FAA) Repair Station Certificate and be certified by the OEM for the performance
of work required by this statement of work. See Section L, Paragraph L-8.
C-3.1.2 The contractor must have access to the most current required
maintenance, rework, and overhaul manuals to insure that the components are
reworked/overhauled and operating in accordance with the applicable CMM, and
OEM's current specifications and procedures.
C-3.1.3 All rework, overhaul, modification, and inspection of components shall
be done in accordance with the manufacturer's most current procedures as
modified by ARSC Engineering. Replacement parts requirements have been modified
for the Servo Controls, Section B item numbers 10 - 14, and respective option
years (see Section J, Attachment 4). In all cases the rework, overhaul,
modification, inspection, and test procedures must meet or exceed manufacturer's
specifications, except where specifically noted herein.
Page 44
DTCG38-95-D-20018
SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT
C-3. REQUIREMENTS. (Cont'd)
C-3.1.4 The Coast Guard reserves the right to review and modify all rework,
overhaul, modification, inspection, and test procedures to make them more
suitable to the Coast Guard environment. The Coast Guard shall be advised
within 15 working days of any changes to manufacturer's procedures. Any such
modification after contract award will be in accordance with FAR clause 52.243-1
Alternate II, entitled, "Changes - Fixed-Price." The Coast Guard reserves the
right to waive any specification.
C-3.2 Major Tasks.
C-3.2.1 Components shall be reworked/overhauled/modified for the specific
fault(s) for which they were returned. DD Form 1577-2, Unserviceable
(Repairable) Tag-Material, or Department of Transportation, USCG, CG-1577-A
(11-90), Unsatisfactory Report Tag, will be attached to each Non-RFI component
describing faults. The contractor shall perform a visual and technical
inspection in accordance with the applicable CMM and correct all additional
deficiencies found. This shall include replacement of broken parts and the
removal of any foreign matter or corrosion.
C-3.2.2 The contractor shall provide all necessary parts, material, labor,
tooling, test equipment and facilities to evaluate, rework, overhaul, and
modify, as required, the following components:
NOMENCLATURE NSNPART NUMBER REWORK/OVERHAUL
------------ -------------- ---------------
Main Landing Gear 1620-14-459-0511 00000-000-00 On Condition
Leg, LH
Main Landing Gear 1620-14-462-8049 00000-000-00 On Condition
Leg, RH
Auxiliary Landing 1620-14-459-0514 00000-000-00 On Condition
Gear 1620-14-SR1-1681 00000-000-00
1620-14-386-4447 00000-000-00
Actuator 1650-14-043-0964 00000-000 Xx condition
Cylinder 1650-14-387-2620 19575-101
Self Regulating 1650-14-383-0795 C24160022 On Condition or 1000
Pump Hour Liner Replace or
2000 Hour Overhaul
Servo Control 1650-14-397-0762 SC8031-1 On Condition or
1650-14-388-3431 8031A 3000 Hours Overhaul
1540-14-397-0763 SC8032-1
1650-14-388-3432 SC8032
1650-14-451-4636 SC8033-1
5930-12-328-3476 SC8034-1
1650-14-404-8798 SC7282
Page 45
XXXX00-00-X-00000
XXXXXXX X - XXXXXXXXXXX/XXXXXXXXXXXXXX/XXXX XXXXXXXXX
C-3. REQUIREMENTS. (Cont'd)
NOMENCLATURE NSN PART NUMBER REWORK/OVERHAUL
------------ --- ----------- ---------------
Landing Gear 6110-14-401-5731 97168-100 On Condition
Regulator
Hydraulic 1620-14-406-3536 97166-300 On Condition
Regulator 6615-14-393-8808 97166-100
C-3.2.3 The following components, when received for rework, shall be overhauled
when the Time-Since-Overhaul (TSO) is equal to or greater than 60% of the
scheduled Time-Between-Overhaul (TBO) as shown below.
COMPONENT SCHEDULED TBO TSO
--------- ------------- ---
Self Regulating Pump 2000 Hours 1200 Hours for Rework
1440 Hours for Liner
Replacement
Servo Control 3000 Hours 1800 Hours
C-3.2.4 The following are tasks associated with the rework, overhaul, and/or
modification effort for each component. This list is not intended to be all
inclusive. The contractor shall determine the specific tasks necessary to meet
current minimum functional performance and test specifications designated by the
OEM for the component.
C-3.2.4.1 Leg, LH Main LG, P/N 00000-000-00 and Leg, RH Main LG, P/N
00000-000-00. Compliance with manufacturer's Service Bulletins (SB) and Service
Letters (SL) is mandatory. Applicability is as follows:
Xxxxxxx-Xxxx -
SL 32-10 - as necessary
SL 32-12 - as necessary
SB 000-00-000 - always required
SB 000-00-000 - reference
C-3.2.4.2 Auxiliary Landing Gear, P/N 00000-000-00. Compliance with
manufacturer's Service Bulletins (SB) and Service Letters (SL) is mandatory.
Applicability is as follows:
Xxxxxxx-Xxxx -
SB 000-00-000 - always required
SB 000-00-000 - always required
SB 000-00-000 - always required
SB 000-00-000 - always required
SB 000-00-000 - always required
SB 000-00-000 - always required
SB 000-00-000 - always required
Page 46
XXXX00-00-X-00000
XXXXXXX X - XXXXXXXXXXX/XXXXXXXXXXXXXX/XXXX XXXXXXXXX
C-3. REQUIREMENTS. (Cont'd)
C-3.2.4.3 Actuator Cylinder, P/N 19570-101 and Actuator Cylinder, P/N
19575-101. Compliance with manufacturer's Service Bulletins (SB) and Service
Letters (SL) is mandatory. Applicability is as follows:
Xxxxxxx-Xxxx SL 32-013 - as necessary
C-3.2.4.4 Self Regulating Pump, P/N C2416022
C-3.2.4.4.1 Self Regulating Pump, P/N C2416022 Liner Replacement. Pumps with
Time-Since-Repair (TSR)/TSO ranging from 1000 to 1440 hours will be removed for
the purpose of replacing the Liner, P/N A81222. The contractor shall
disassemble and inspect each pump returned for liner replacement. After
inspection, the contractor shall install a liner replacement kit consisting of
the following parts:
Liner P/N A81222 1 EA
Seal P/N BT5-7 2 EA
Packing P/N BT63-4 1 EA
Packing P/N BT82-4 1 EA
After installation of the above kit, the contractor shall re-assemble and
perform operational tests in accordance with the CMM on each pump. If failures
unrelated to the liner replacement are discovered, the contractor shall request
authorization to perform rework priced in Section B.
C-3.2.4.4.2 Application of SB 000-00-000 required during overhaul.
C-3.2.4.5 Servo Controls. All servo controls returned for rework/overhaul
shall be upgraded to the large body configuration:
P/N SC8033-1 and SC8034-1.
C-3.2.4.5.1 Application of SBs 0000-00-00-00 and 0000-00-00-00 is required
during overhaul, modification and rework. These SBs require the installation of
stainless steel bearings.
C-3.2.5 During inspection and functional test, the presence of corrosion in a
component shall constitute reason for a more thorough disassembly and
inspection. Should corrosion be found, disassembly shall be made to the extent
necessary to remove corrosion or replace the part, or parts, affected.
C-3.2.6 Corroded parts shall be replaced, except in those cases where removal
of corrosion from a part will not impair efficiency or safe operation of the
part. Corrosion removal and treatment of affected areas will be accomplished in
accordance with manufacturer's specifications and NAVAIR 01-1A-509.
Page 47
DTCG38-95-D-20018
SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT
C-3. REQUIREMENTS. (Cont'd)
C-3.2.7 The contractor shall make every effort to develop a rework procedure
for component parts for which none exist. The contractor shall submit the
procedure to the Coast Guard for approval prior to implementation. The
contractor may be required to coordinate changes with the OEM.
C-3.2.8 Upon completion of rework and testing, the contractor shall clean
reworked components in accordance with the applicable CMM instructions.
C-3.3 Replacement Parts. Parts found to be defective shall be replaced with
parts meeting the manufacturer's specifications and drawings. Replacement parts
shall be new. Parts shall be replaced as specified in the manufacturer's most
current procedures as modified by ARSC Engineering. Replacement parts
requirements have been modified for Servo Controls, Section B, Items 10 - 14,
and respective option years (see Section J, Attachment 4). Prices provided in
Section B shall be inclusive of all required replacement parts except as
provided in Section H, Paragraph H-2, Exclusions.
C-3.3.1 Separately Priced Replacement Parts. During the course of this
contract, the contractor may propose use of serviceable parts in lieu of new
separately priced replacement parts subject to Contracting Officer approval.
The price of any such part will be negotiated on a case by case basis.
C-3.4 Replacement Parts Listing. The contractor shall submit a listing of all
replacement parts utilized in the rework/overhaul/modification procedure of each
assembly/component. This listing shall be submitted with the contractor's
invoice. The replacement parts listing must show assembly/component serial
number, nomenclature, and replacement parts used, listed in numerical order.
C-3.5 Unusual Damage. Prices should not include components which indicate
obvious misuse, cannibalization, or severe damage due to mishandling or crash
damage. Components received with unusual damage shall be inspected,
rework/overhaul/modification estimate determined, and authorization to proceed
obtained from the Contracting Officer prior to commencement of work. The labor
rate utilized in the estimate will be as specified in Section B. The contractor
shall notify the Contracting Officer within 15 working days of receipt, when any
component reflects unusual damage. If any material is determined by the Coast
Guard to be scrap or beyond economical rework, the contractor will be given
disposition instructions. The contractor will be reimbursed the firm fixed
price for test and evaluation as specified in Section B.
Page 48
DTCG38-95-D-20018
SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT
C-3. REQUIREMENTS. (Cont'd)
C-3.6 Test and Evaluation. If, after visual and functional inspections, an
item is found to meet manufacturer's minimum performance specifications, the
contractor will be allowed the firm fixed price for test and evaluation. The
Failure Data Report shall be prepared, indicating the Coast Guard's reported
failure, and included with the returned component, as well as with the invoice.
C-3.7 Technical Support Services. The contractor shall provide
engineering/customer support services for the items set forth in Section B. The
Coast Guard may develop a requirement for additional technical support services
in support of the Coast Guard's continuous quality improvement program. These
requirements will be transmitted to the contractor in writing on a case by case
basis. Upon receipt of a request for a quote for a specific task, the
contractor shall prepare and submit to the Contracting Officer, a proposal of
the hours associated with the performance task. The Government will utilize the
labor rate specified in Section B to determine a final price. Specific
deliverables will be identified on individual delivery orders.
C-3.8 Product Improvement Proposal (PIP)/Engineering Change Proposal (ECP).
When the need for a PIP/ECP is identified by the Coast Guard, the contractor
will be notified in accordance with FAR 52.243-1 Alternate II, Changes -
Fixed-Price. The contractor shall submit a proposal to the Contracting Officer
for an incremental charge to be assessed each time the PIP/ECP is incorporated
into the component. The proposal shall contain a breakdown of material
estimates. The labor rate will be as specified in Section B. Upon agreement of
the price for incorporation of the PIP/ECP, the Contracting Officer will issue a
supplemental agreement reflecting the incorporation of the approved PIP/ECP.
The contractor shall not incorporate approved PIP/ECPs prior to contract
modification.
C-3.9 Value Engineering Change Proposals (VECP). The contractor is encouraged
to develop, prepare, and submit VECPs voluntarily. The contractor will share in
any net savings realized from accepted VECPs in accordance with the procedures
outlined in FAR 52.248-1.
C-3.10 Service Bulletins. The contractor shall provide the Contracting Officer
two copies of all service bulletins within 10 calendar days of receipt. The
Contracting Officer will notify the contractor in writing of components
requiring incorporation of mandatory or optional service bulletins. Upon
receiving notice of a service bulletin, from the Contracting Officer, the
contractor shall submit, within 30 calendar days, a detailed proposal which
shall include a listing of replacement parts and/or materials required, the time
needed to effect the modifications, an estimated price breakdown of each part,
and the number of labor hours required. The Coast Guard will normally
incorporate all mandatory service bulletins. The labor rate will be as
specified in Section B.
Page 49
DTCG38-95-D-20018
SECTION C - DESCRIPTION/SPECIFICATIONS/WORK STATEMENT
C-3. REQUIREMENTS. (Cont'd)
C-3.11 Aviation Computerized Maintenance System (ACMS). The contractor shall
submit component repair tracking forms as specified in Section H, Paragraph H-l,
Aviation Computerized Maintenance System (ACMS) Procedures.
C-3.12 Publications/Updates. The contractor, within 60 calendar days of
contract award, shall provide the Coast Guard with an updated copy of all
applicable OEM approved CMMs for components listed in Section B. The CMMs shall
reflect the latest procedures used in the rework, overhaul, and modification of
components. If during the course of reworking components, the contractor
determines that current procedures detailed in the CMM, should be changed, two
copies of recommended changes shall be submitted to the Coast Guard for review
and approval/disapproval. The contractor shall continuously update all
applicable CMMs during the life of the contract. Revisions to CMMs shall be
submitted to the Coast Guard within 60 calendar days of receipt by the
contractor.
C-4. QUALITY ASSURANCE PROVISIONS.
C-4.1 Responsibility for Inspections and Tests. The contractor shall establish
an Inspection System in accordance with MIL-I-45208A, Quality Program
Requirements.
C-4.2 Inspections. After rework/overhaul/modification is complete each
component shall be inspected/checked in accordance with procedures outlined in
the applicable CMM.
C-4.3 Testing. No deviations from test requirements are authorized.
C-5. NOTES.
C-5.1 Definitions.
C-5.1.1 ON CONDITION. Rework of a component when some type of degradation or
failure prevents it from performing in the desired manner.
C-5.1.2 QUALITY DEFICIENCY REPORT (QDR). The QDR (SF368) is a means of
informing DOD and civilian supply sources of deficiencies in the products
procured from them by ARSC. The QDR is usually the result of an Unsatisfactory
Report of Aeronautical Equipment, CG Form 4010 (UR), received from a USCG Air
Station, or initiated at ARSC.
Page 50
DTCG38-95-D-20018
SECTION D - PACKAGING AND MARKING
D-1. PRESERVATION - PACKAGING - PACKING.
Each component shall be individually preserved, packaged, and packed (PPP). PPP
shall be in accordance with MIL-P-116J, Method II, Submethod IIF. Quality
conformance tests are not required. Humidity indicators are not required. For
availability of this document see Section L, Paragraph L-3.
D-2. MARKING INSTRUCTIONS.
Material shall be marked in accordance with Paragraph 4.5 of MIL-STD-129M,
Marking for Shipment and Storage, dated 15 Jan 93. Accordingly, items of the
same National Stock Number (NSN) shall be individually packaged and labeled with
NSN, P/N, quantity, unit of issue, serial number, contract number, and delivery
order number on the exterior of the shipping container.
Page 51
DTCG38-95-D-20018
SECTION E - INSPECTION AND ACCEPTANCE
E-1. NOTICE - CLAUSES INCORPORATED BY REFERENCE.
The following contract clauses pertinent to this section are hereby incorporated
by reference:
FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES
52.246-4 INSPECTION OF SERVICES - FEB 1992
FIXED-PRICE.
52.246-15 CERTIFICATE OF CONFORMANCE. APR 1984
E-2. INSPECTION & ACCEPTANCE.
Inspection and acceptance of material under this contract shall be performed at
destination by local Quality Assurance personnel, and consist of count and
condition only.
ARSC considers components RFI upon acceptance. Components determined to be
Non-RFI upon installation may be returned to the contractor as a Quality
Deficiency Report item.
The contractor shall provide the necessary documentation as required in Xxxxxxx
X, Xxxxxxxxx X-0, Xxxxxxxxxxxxx.
E-3. MATERIAL INSPECTION AND RECEIVING REPORT.
At the time of delivery of each component under this contract, the contractor
shall prepare and furnish to the Contracting Officer a properly completed DD
Form 250 Material Inspection and Receiving Report (MIRR). The DD Form 250 must
include: Contract Number, Delivery Order Number, Nomenclature, NSN, P/N,
Quantity, Unit of Issue, and Serial Number.
One copy of the DD Form 250, marked "Information Only", shall be sent as a
packing slip with each shipment and affixed to the outside of the shipping
container. The final billing DD Form 250 shall be sent to the address in
Xxxxxxx X, Xxxxxxxxx X-0, with a copy to the Contracting Officer.
Page 52
DTCG38-95-D-20018
SECTION F - DELIVERIES OR PERFORMANCE
F-1. NOTICE - CLAUSES INCORPORATED BY REFERENCE.
The following contract clauses pertinent to this section are hereby incorporated
by reference:
FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES
52.212-13 STOP-WORK ORDER. AUG 1989
52.212-15 GOVERNMENT DELAY OF WORK. APR 1984
52.247-34 F.O.B. DESTINATION. NOV 1991
52.247-54 DIVERSION OF SHIPMENT UNDER F.O.B. MAR 1989
DESTINATION CONTRACTS.
52.247-55 F.O.B. POINT FOR DELIVERY OF GOVERNMENT- APR 1984
FURNISHED PROPERTY.
F-2. DELIVERY SCHEDULE.
Delivery shall be according to the following schedule:
SCOPE CALENDAR DAYS AFTER
*CLIN OF WORK RECEIPT OF ORDER/COMPONENT
---- ------- --------------------------
1 REWORK 60
2 REWORK 60
3 REWORK 60
4 MODIFY/REWORK 60
5 MODIFY/REWORK 60
6 REWORK 45
7 REWORK 45
8 REWORK 45
MODIFY/OVERHAUL 45
REPLACE LINER ONLY 45
9 REWORK 45
MODIFY/OVERHAUL 45
REPLACE LINER ONLY 45
Page 53
DTCG38-95-D-20018
SECTION F - DELIVERIES OR PERFORMANCE
F-2. DELIVERY SCHEDULE. (Cont'd)
SCOPE CALENDAR DAYS AFTER
*CLIN OF WORK RECEIPT OF ORDER/COMPONENT
----- ------- --------------------------
10 XXXXXX/XXXXXXXX 00
00 REWORK 45
XXXXXXXX 00
00 XXXXXX/XXXXXXXX 00
00 REWORK 45
OVERHAUL 45
23 Aviation Computerized Maintenance With invoice
Maintenance System (ACMS) Form
24 Failure Data Report With invoice
25 Replacement Parts Listing With invoice
26 Standard Form 294 Semi-annually, through 31 March and 30 Sept,
and at contract completion
Due 25 April and 25 October
27 Standard Form 295 Quarterly, through end of March, June,
September, and December
Due 25th day of following month
28 Form DOT F 4220.43 Annually, not later than 15 Sept of each
calendar year, and at contract completion
*Includes respective option years.
NOTE: Partial and/or early deliveries are acceptable.
F-3. F.O.B. POINT.
Shipments under this contract shall be f.o.b. Destination only. Offers
submitted on any other basis will be rejected as nonresponsive.
In accordance with clause at FAR 52.247-55, f.o.b. Point for Delivery
of Government-Furnished Property, the Coast Guard will ship components, freight
prepaid, to the Contractor's facility within the United States (except Alaska
and Hawaii) or Canada to the location specified in Section K, Paragraph K-11,
Place of Performance unless the Contractor specifies an alternate location
below:
-------------------------------
-------------------------------
-------------------------------
(City, County, State, Zip Code)
Page 54
DTCG38-95-D-20018
SECTION F - DELIVERIES OR PERFORMANCE
F-3. F.O.B. POINT. (Cont'd)
In the event that the Contractor's facility is located outside the contiguous
states, the District of Columbia or Canada, the f.o.b. Point for Government
delivery of Government-furnished property shall be a location in the United
States (excluding Alaska and Hawaii) specified by the Contractor below:
-------------------------------
-------------------------------
-------------------------------
(City, County, State, Zip Code)
NOTE: The delivery clock will start upon receipt of delivery order
at contractor's facility or upon receipt of the component at the CONUS location.
All actions necessary for shipment through customs for items leaving and
entering the United States shall be the responsibility of the contractor.
F-4. SHIPPING INSTRUCTIONS.
Components will be shipped to the contractor from Coast Guard Operating Units or
ARSC. Upon completion of required services, material shall be shipped to the
following address, or to other Coast Guard Operating Units as directed by the
Contracting Officer.
USCG Aircraft Repair and Supply Center
Xxxxxxxxx Xxxxxxx, Xxxxxxxx 00
Xxxxxxxxx Xxxx, XX 00000-0000
XXXX FOR: 41000 Field Stock
Contract Number DTCG38-95-D-20018
Delivery Order Number
------------------------------
(assigned at time of issuance)
Unless otherwise specified, documentation listed in Section B shall be submitted
to the address shown in Section G, Paragraph G-l, Address of Correspondence.
The Component Repair Record shall be submitted as follows:
Original Copy 1 Copy 2
-------- ------ ------
TAMSCO Packaged with Attached
0000 Xxxxxx Xxxxx overhauled/ to invoice
Suite 200 reworked component
Xxxxxxxxxx, XX 00000
Attn: ACMS
The original Failure Data Report shall be attached to the invoice. One copy
shall be attached to the DD Form 250 shipped with the
reworked/overhauled/modified component.
Page 55
DTCG38-95-D-20018
SECTION F - DELIVERIES OR PERFORMANCE
F-5. ORDERING PERIOD.
The ordering period for this contract shall be from the effective date of
contract award through one year from effective date of award, with four one-year
options (if exercised), renewable annually. The total duration of the ordering
period for this contract shall not exceed five years.
F-6. LIQUIDATED DAMAGES.
(a) In the event the contractor fails to meet the contractual delivery
schedule, liquidated damages will be assessed. Liquidated damages will be based
on the overhaul price for the specific component (the rework price will be used
for components without a specified overhaul price). Liquidated damages shall be
assessed against the contractor in the amount of 1.0% (of overhaul price) per
calendar day for days 61-90 for landing gears and 46-75 all other components.
Liquidated damages shall be assessed against the contractor in the amount of
2.0% (of the overhaul price) per calendar day for days above 91 for the landing
gear and 76 for all other components. For any specific component, the maximum
liquidated damages shall be 100% of the delivery order price.
(b) Liquidated damages do not apply to components which have been determined
by the Contracting Officer to be exclusions under this contract in accordance
with Section H, Paragraph H-2, Exclusions.
(c) The parties agree that the liquidated damages formula set forth herein is
fair and reasonable, and not a penalty. The parties further agree not to contest
the validity of the liquidated damages provision set forth herein.
Page 56
DTCG38-95-D-20018
SECTION G - CONTRACT ADMINISTRATION DATA
G-1. ADDRESS OF CORRESPONDENCE.
All correspondence, except as otherwise specified, shall be directed to the
following address:
Contracting Officer
Procurement Branch, HH-65A Contract Section
USCG Aircraft Repair and Supply Center
Xxxxxxxxx Xxxx, XX 00000-0000
G-2. INVOICING INSTRUCTIONS.
The original and three copies of the Contractor's invoice shall be submitted to
the designated billing office for payment as follows:
Chief, Fiscal Branch
Building 63
USCG Aircraft Repair and Supply Center
Xxxxxxxxx Xxxx, XX 00000-0000
XXXX FOR: Contract Number DTCG38-95-D-20018
Delivery Order Number
------------------------------
(assigned at time of issuance)
NOTE: Failure to submit the DD Form 250, Component Repair Record, Failure
Data Report, Airworthiness Certification, and Replacement Parts
Listing will constitute an improper invoice, and may result in payment
delay or nonpayment.
G-3. REMITTANCE ADDRESS.
If remittance address is different from that shown on Page 1 of SF 33, Block 15A
enter such address below:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Page 57
DTCG38-95-D-20018
SECTION G - CONTRACT ADMINISTRATION DATA
G-4. ORDERING OFFICE.
The following activity is the only unit authorized to place delivery orders
under this contract:
Contracting Officer
USCG Aircraft Repair and Supply Center
Xxxxxxxxx Xxxx, XX 00000-0000
Page 58
DTCG38-95-D-20018
SECTION H - SPECIAL CONTRACT REQUIREMENTS
H-l. AVIATION COMPUTERIZED MAINTENANCE SYSTEM (ACMS) PROCEDURES.
ACMS is the management information system used to schedule and record all Coast
Guard aircraft maintenance. The contractor's responsibility within ACMS shall
include submission of the appropriate reports within 5 working days of the
completion of work. Items 1 - 14, plus respective option years, in Section B
will be shipped to the contractor with a Significant Component History Record
(SCHR) and Component Repair Record (CRR) for each component shipped. These
forms are described below:
(a) SCHR - Records the maintenance history of serial-number-tracked
components. Remains with corresponding part until reinstalled on aircraft
or annotated "Scrapped" and returned to Technical and Management Services
Corporation (TAMSCO), Beltsville, Maryland.
(b) CRR - Records the maintenance performed on a serial-number-tracked
components by the contractor and enrolls or disenrolls components from ACMS
when those components are scrapped, added to, or removed from the Coast
Guard parts inventory. The original of the CRR shall be mailed to TAMSCO
within 5 working days of acceptance of the component by the Government
inspector. Copy 1 shall be packed with the component at the completion of
the rework/overhaul/modification for return to the Coast Guard. Copy 2
shall be attached to and submitted with the contractor's invoice. See
Section F, Paragraph F-4 for appropriate addresses.
The contractor shall retain copies of the CRR for no less than 2 years after
delivery of component.
H-2. EXCLUSIONS.
Components received which indicate obvious misuse, cannibalization or severe
damage due to mishandling or crash damage may dictate an exclusion from the
prices specified in Section B. Such components shall be inspected, maintenance
costs determined, and authorization to proceed obtained from the Contracting
Officer prior to commencement of rework. If the contractor considers a component
to be a candidate for exclusion, the Contracting Officer shall be notified
within 15 days of receipt. Verbal notification to the Contracting Officer shall
be confirmed in writing. The contractor's delivery obligation for the component
shall be suspended as of the date of notice to the Contracting Officer. The
Contracting Officer will make a unilateral written determination, within 30 days
of written notice, as to exclusion validity. The determination is subject to
FAR clause 52.233-1, Disputes. The Government retains the right to unilaterally
set the price for exclusion items in the event an agreement on price cannot be
reached. The contractor's delivery obligation shall resume upon receipt of the
Contracting Officer's determination.
Page 59
DTCG38-95-D-20018
SECTION H - SPECIAL CONTRACT REQUIREMENTS
H-2. EXCLUSIONS. (Cont'd)
The Government shall not be liable for any amount expended by the Contractor in
excess of the firm fixed price reflected in Section B unless prior written
authorization has been given by the Contracting Officer.
H-3. GOVERNMENT PROPERTY.
Failure by the Government to furnish any of the line items in the amounts or
quantities described as "estimated" or "maximum" will not entitle the Contractor
to any equitable adjustment in price as defined in the Government Property
Clause of the contract.
H-4. VALUE OF GOVERNMENT PROPERTY.
In accordance with the requirement contained in FAR 45.505-2(b)(2), the
Government shall determine and furnish the unit price of the
Government-furnished property on the document covering shipment of the property.
H-5. EXERCISE OF OPTIONS.
As prescribed in FAR clause 52.217-9, Option to Extend the Term of the Contract,
the Coast Guard may extend the contract as specified in Section B. Exercise of
options is subject to FAR clause 52.232-18, Availability of Funds.
H-6. PRICING INSTRUCTIONS.
(a) The offeror may propose unit prices for the option years which differ
from the unit prices for the base year.
(b) Offered prices for "rework", "overhaul", "modify only", "modify/
rework", "modify/overhaul", and "replace liner only" requirements shall include
all labor, parts, materials, test equipment, facilities, other direct and
indirect costs, and profit associated with performance of the specific efforts
as described in Section C, except those replacement parts that are separately
priced within the line item.
(c) Offered prices for "test and evaluation" shall include all labor, parts,
materials, test equipment, facilities, other direct and indirect costs, and
profit associated with performance of test and evaluation. This price will apply
when the conditions as specified in Paragraphs C-3.5, Unusual Damage and C-3.6,
Test and Evaluation are present.
(d) Offered prices for separately priced replacement parts shall include all
labor, parts, materials, test equipment, facilities, other direct and indirect
costs, and profit associated with furnishing the specified part on an "as
required" basis.
(e) Parts provided for components identified as Exclusions, Paragraph H-2,
shall be priced as follows:
Page 60
DTCG38-95-D-20018
SECTION H - SPECIAL CONTRACT REQUIREMENTS
H-6. PRICING INSTRUCTIONS. (Cont'd)
1. Discounted List Price as the lower of the following two prices:
(a) Contractor's current commercial catalog minus best commercial
discount, or
(b) Best commercial price.
2. Excluded (Repairable) Parts:
(a) If part is damaged beyond repair (SCRAP) the Coast Guard will pay
replacement part cost using price as determined above.
(b) The repair of an excluded part is subject to Contracting Officer
approval.
3. The Government retains the right to unilaterally set the price for
exclusion parts in the event an agreement on price cannot be reached.
(f) Offered labor rates shall be loaded rates inclusive of all direct and
indirect charges, escalation and profit.
(g) All actions necessary for shipment through customs for items leaving and
entering the United States, and associated charges for those actions shall be
the responsibility of the contractor. All associated charges as well as
delivery/cost factors should be considered by offeror.
H-7. UTILIZATION OF SEPARATELY PRICED REPLACEMENT PARTS.
The contractor shall notify the Contracting Officer within 15 calendar days
after receipt of the component when any of the separately priced replacement
part(s) specified in the Section B are required. This notification shall
include a list (by name, part number, and quantity) of any separately priced
replacement part(s) required. Within 30 calendar days of notification from the
contractor, the Contracting Officer will either issue a modification to the
delivery order authorizing use of the separately priced replacement part(s) or
providing disposition instructions. The delivery schedule will be adjusted
accordingly for any delay associated with requesting and obtaining approval to
utilize the specified separately priced replacement part(s).
Page 61
DTCG38-95-D-20018
SECTION H - SPECIAL CONTRACT REQUIREMENTS
H-8. AIRWORTHINESS.
FLIGHT CRITICAL AIRWORTHINESS CERTIFICATION REQUIREMENTS
1. All "Flight Critical" aircraft parts ordered, serviced, modified, reworked,
and/or overhauled under the provisions of this agreement/order/contract must be
airworthy and suitable for installation on a U.S. Coast Guard aircrafT.
NOTE: All components and associated replacement parts on this acquisition are
considered FLIGHT CRITICAL.
2. If you are certified by any organization to manufacture, service, modify,
rework or overhaul any "flight critical" aircraft item contained within this
requirement, identify the item(s) and provide the following certification with
any substantiating documentation required:
Original Equipment Manufacturer
----
OEM Certified by______________________(OEM);
---- provide copy of your OEM Certification.
Federal Aviation Administration (FAA) Certified; provide copy of your
---- FAA Certification.
Department of Defense (DOD) Certified;
---- provide DOD contract number and point of contact under
which this supply/service is performed.
DOD Contract: ____________________________________
POC & Phone#: _____________________ (___)___-____
Other Certification, i.e., Coast Guard, foreign government, etc. CALL
---- THE ORDERING OFFICER TO AFFIRM ACCEPTANCE OF THIS CERTIFICATION PRIOR
TO PROCEEDING WITH ANY WORK UNDER THIS ORDER.
Type of Cert._______________________ Number:_________________________
Date of Cert._______________________ Duration:_______________________
Certifying Organization:_____________________________________________
------------------------------------ -----------------
(Contractor's Signature) (Date)
Page 62
DTCG38-95-D-20018
SECTION H - SPECIAL CONTRACT REQUIREMENTS
H-8. AIRWORTHINESS. (Cont'd)
3. The forms/certification indicated above shall be attached to the OUTSIDE of
the shipping container and a copy shall be included with the invoice. Failure
to submit the appropriate forms/certificate shall constitute an improper invoice
and will result in nonpayment.
4. IF THE CONTRACTOR CANNOT CERTIFY AS REQUIRED ABOVE, HE SHALL IMMEDIATELY AND
PRIOR TO ANY WORK BEING INITIATED NOTIFY THE APPROPRIATE GOVERNMENT CONTRACTING
OFFICER.
-----------------------------------------------------------------
AIRWORTHINESS CERTIFICATION REQUIREMENTS
1. All aircraft parts ordered, serviced, modified, reworked, and/or overhauled
under the provisions of this agreement/order/contract must be airworthy and
suitable for installation on a U.S. Coast Guard aircraft.
2. The contractor shall furnish a Certificate of Airworthiness in accordance
with FAA procedures (FAA Form 8130-3) or a Certificate of Conformance in
accordance with FAR 52.246-15, for each component shipped in response to this
order. If a Certificate of Conformance is used it MUST be submitted in the
format provided below.
3. This certificate shall be attached to the OUTSIDE of the shipping container
and a copy shall be included with the invoice. Failure to submit the
appropriate certificate shall constitute an improper invoice and will result in
nonpayment.
4. IF THE CONTRACTOR CANNOT CERTIFY AS REQUIRED ABOVE, HE SHALL IMMEDIATELY AND
PRIOR TO ANY WORK BEING INITIATED NOTIFY THE APPROPRIATE GOVERNMENT CONTRACTING
OFFICER.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
CERTIFICATE OF CONFORMANCE IN ACCORDANCE WITH FAR 52.246-15
"I CERTIFY THAT ON__________(INSERT DATE), THE_________________________________
(INSERT CONTRACTOR'S NAME) FURNISHED THE SUPPLIES OR SERVICES CALLED FOR BY
CONTRACT NUMBER_____________________________________VIA _______________________
(CARRIER) ON________________________(IDENTIFY THE XXXX OF LADING OR SHIPPING
DOCUMENT) IN ACCORDANCE WITH ALL APPLICABLE REQUIREMENTS. I FURTHER CERTIFY
THAT THE SUPPLIES OR SERVICES ARE OF THE QUALITY SPECIFIED AND
Page 63
DTCG38-95-D-20018
SECTION H - SPECIAL CONTRACT REQUIREMENTS
H-9. AIRWORTHINESS. (Cont'd)
AND CONFORM IN ALL RESPECTS WITH THE CONTRACT REQUIREMENTS, INCLUDING
SPECIFICATIONS, DRAWINGS, PRESERVATION, PACKAGING, PACKING, MARKING
REQUIREMENTS, AND PHYSICAL ITEM IDENTIFICATION (PART NUMBER), AND ARE IN THE
QUANTITY SHOWN ON THIS OR ON THE ATTACHED ACCEPTANCE DOCUMENT."
DATE OF EXECUTION:
-----------------------------------
SIGNATURE:
-------------------------------------------
TITLE:
-----------------------------------------------
H-9. REPORTING REQUIREMENT FOR OCEAN SHIPMENTS OF CARGO.
(a) The contractor shall submit, for each individual ocean shipment of cargo,
one legible copy of the xxxx-of-lading to the Maritime Administration (MARAD),
Division of National Cargo, Office of Market Development, 000 0xx Xx., XX,
Xxxxxxxxxx, XX 00000.
(b) Each xxxx-of-lading shall contain the following information:
(1) Sponsoring U.S. Government agency
(2) Name of vessel
(3) Vessel flag of registry
(4) Date of loading
(5) Port of loading
(6) Port of final discharge
(7) Description of commodity
(8) Gross weight in pounds and cubic feet, if available
(9) Total ocean freight revenue in U.S. Dollars
(c) The contractor shall furnish the bills-of-lading to MARAD within 20
working days of the loading for shipments originating in the United States or
within 30 working days for shipments originating outside the United States.
(d) The contractor shall also furnish a legible copy of the xxxx-of-lading
to the Contracting Officer.
(End of Clause)
Page 64
DTCG38-95-D-20018
SECTION H - SPECIAL CONTRACT REQUIREMENTS
H-9. REPORTING REQUIREMENT FOR OCEAN SHIPMENTS OF CARGO. (Con't)
(c) The contractor shall furnish the bills-of-lading to MARAD within 20
working days of the loading for shipments originating in the United States or
within 30 working days for shipments originating outside the United States.
(d) The contractor shall also furnish a legible copy of the xxxx-of-lading
to the Contracting Officer.
(End of Clause)
Page 65
DTCG38-95-D-20018
PART II
SECTION I - CONTRACT CLAUSES
I-1. CLAUSES INCORPORATED BY REFERENCE. (JUN 1988) 52.252-2
This contract incorporates one or more clauses by reference, with the same force
and effect as if they were given in full text. Upon request, the Contracting
Officer will make their full text available.
(End of clause)
FEDERAL ACQUISITION REGULATION (48 CFR CHAPTER 1) CLAUSES
52.202-1 DEFINITIONS. SEP 1991
52.203-1 OFFICIALS NOT TO BENEFIT. APR 1984
52.203-3 GRATUITIES. APR 1984
52.203-5 COVENANT AGAINST CONTINGENT FEES. APR 1984
52.203-6 RESTRICTIONS ON SUBCONTRACTOR SALES JUL 1985
TO THE GOVERNMENT.
52.203-7 ANTI-KICKBACK PROCEDURES. OCT 1988
52.203-10 PRICE OR FEE ADJUSTMENT FOR ILLEGAL SEP 1990
OR IMPROPER ACTIVITY.
52.203-12 LIMITATION ON PAYMENTS TO INFLUENCE JAN 1990
CERTAIN FEDERAL TRANSACTIONS.
52.208-1 REQUIRED SOURCES FOR JEWEL BEARINGS APR 1984
AND RELATED ITEMS.
52.209-6 PROTECTING THE GOVERNMENT'S INTEREST NOV 1992
WHEN SUBCONTRACTING WITH CONTRACTORS
DEBARRED, SUSPENDED, OR PROPOSED FOR
DEBARMENT.
52.210-5 NEW MATERIAL. APR 1984
52.212-8 DEFENSE PRIORITY AND ALLOCATION SEP 1990
REQUIREMENTS.
52.215-1 EXAMINATION OF RECORDS BY FEB 1993
COMPTROLLER GENERAL.
52.215-2 AUDIT - NEGOTIATION. FEB 1993
52.215-23 PRICE REDUCTION FOR DEFECTIVE COST DEC 1994
OR PRICING DATA - MODIFICATIONS.
Page 66
DTCG38-95-D-20018
SECTION I - CONTRACT CLAUSES
I-1. CLAUSES INCORPORATED BY REFERENCE. (JUN 1988) 52.252-2 (Cont'd)
52.215-25 SUBCONTRACTOR COST OR PRICING DATA - DEC 1994
MODIFICATIONS.
52.215-26 INTEGRITY OF UNIT PRICES. APR 1991
ALT I (APR 1991)
52.215-31 WAIVER OF FACILITIES CAPITAL COST SEP 1987
OF MONEY.
52.215-33 ORDER OF PRECEDENCE. JAN 1986
52.216-18 ORDERING. APR 1984
para (a) 25 Sept 1995 through 24 Sept 1996,
may be extended through 24 Sept 2000
based on exercise of options.
52.216-19 DELIVERY-ORDER LIMITATIONS. APR 1984
para (a) one (1) each for any line item
(b)(1) the total estimated contract
line item quantity
(2) 50% of estimated contract quantity
(3) 30 days
(d) 15 calendar days
52.216-22 INDEFINITE QUANTITY. APR 1984
para (d) 24 December 2000
NOTE: Maximum quantities may be exceeded
if agreeable to all parties.
52.217-9 OPTION TO EXTEND THE TERM OF THE CONTRACT. MAR 1989
para (a) within 30 calendar days prior
to contract expiration
para (c) five years
52.219-8 UTILIZATION OF SMALL BUSINESS CONCERNS FEB 1990
AND SMALL DISADVANTAGED BUSINESS CONCERNS.
52.219-9 SMALL BUSINESS AND SMALL DISADVANTAGED FEB 1995
BUSINESS SUBCONTRACTING PLAN.
52.219-13 UTILIZATION OF WOMEN-OWNED SMALL AUG 1986
BUSINESSES.
52.219-16 LIQUIDATED DAMAGES - SMALL BUSINESS AUG 1989
SUBCONTRACTING PLAN.
52.220-3 UTILIZATION OF LABOR SURPLUS AREA APR 1984
CONCERNS.
Page 67
DTCG38-95-D-20018
SECTION I - CONTRACT CLAUSES
I-1. CLAUSES INCORPORATED BY REFERENCE. (JUN 1988) 52.252-2 (Cont'd)
52.222-20 XXXXX-XXXXXX PUBLIC CONTRACTS ACT. APR 1984
52.222-26 EQUAL OPPORTUNITY. APR 1984
52.222-28 EQUAL OPPORTUNITY PREAWARD CLEARANCE APR 1984
OF SUBCONTRACTS.
52.222-35 AFFIRMATIVE ACTION FOR SPECIAL APR 1984
DISABLED AND VIETNAM ERA VETERANS.
52.222-36 AFFIRMATIVE ACTION FOR HANDICAPPED APR 1984
WORKERS.
52.222-37 EMPLOYMENT REPORTS ON SPECIAL DISABLED JAN 1988
VETERANS AND VETERANS OF THE VIETNAM ERA.
52.223-2 CLEAN AIR AND WATER. APR 1984
52.223-6 DRUG-FREE WORKPLACE. JUL 1990
52.225-10 DUTY-FREE ENTRY. APR 1984
(Note: The Coast Guard is not accorded
duty-free entry on these items).
52.225-11 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES. MAY 1992
52.227-1 AUTHORIZATION AND CONSENT. APR 1984
52.227-2 NOTICE AND ASSISTANCE REGARDING APR 1984
PATENT AND COPYRIGHT INFRINGEMENT.
52.227-14 RIGHTS IN DATA - GENERAL. JUN 1987
52.229-3 FEDERAL, STATE, AND LOCAL TAXES. JAN 1991
52.229-5 TAXES - CONTRACTS PERFORMED IN U.S. APR 1984
POSSESSIONS OR PUERTO RICO.
52.232-1 PAYMENTS. APR 1984
52.232-8 DISCOUNTS FOR PROMPT PAYMENT. APR 1989
52.232-11 EXTRAS. APR 1984
52.232-17 INTEREST. JAN 1991
52.232-18 AVAILABILITY OF FUNDS. APR 1984
Page 68
DTCG38-95-D-20018
SECTION I - CONTRACT CLAUSES
I-1. CLAUSES INCORPORATED BY REFERENCE. (JUN 1988) 52.252-2 (Cont'd)
52.232-19 AVAILABILITY OF FUNDS FOR THE NEXT APR 1984
FISCAL YEAR.
30 September 1995
30 September 1995
52.232-23 ASSIGNMENT OF CLAIMS. JAN 1986
52.232-25 PROMPT PAYMENT. MAR 1994
52.232-28 ELECTRONIC FUNDS TRANSFER PAYMENT APR 1989
METHODS.
52.233-1 DISPUTES. MAR 1994
52.233-3 PROTEST AFTER AWARD. AUG 1989
52.242-13 BANKRUPTCY. APR 1991
52.243-1 CHANGES - FIXED-PRICE. AUG 1987
ALT II (APR 1984)
52.244-1 SUBCONTRACTS (FIXED-PRICE CONTRACTS). FEB 1995
52.244-5 COMPETITION IN SUBCONTRACTING. APR 1984
52.245-1 PROPERTY RECORDS. APR 1984
52.245-2 GOVERNMENT PROPERTY (FIXED-PRICE DEC 1989
CONTRACTS).
52.246-23 LIMITATION OF LIABILITY. APR 1984
52.246-25 LIMITATION OF LIABILITY - SERVICES. APR 1984
52.247-63 PREFERENCE FOR U.S.-FLAG AIR CARRIERS. APR 1984
52.247-64 PREFERENCE FOR PRIVATELY OWNED U.S.-FLAG APR 1984
COMMERCIAL VESSELS.
52.248-1 VALUE ENGINEERING. MAR 1989
52.249-2 TERMINATION FOR CONVENIENCE OF THE APR 1984
GOVERNMENT (FIXED-PRICE).
52.249-8 DEFAULT (FIXED-PRICE SUPPLY AND APR 1984
SERVICE).
52.253-1 COMPUTER GENERATED FORMS. JAN 1991
Page 69
DTCG38-95-D-20018
SECTION I - CONTRACT CLAUSES
I-2. REQUIREMENT FOR CERTIFICATE OF PROCUREMENT INTEGRITY-MODIFICATION.
(NOV 1990) 52.203-9
(a) Definitions. The definitions set forth in FAR 3.104-4 are hereby
incorporated in this clause.
(b) The Contractor agrees that it will execute the certification set forth in
paragraph (c) of this clause when requested by the Contracting Officer in
connection with the execution of any modification of this contract.
(c) Certification. As required in paragraph (b) of this clause, the officer
or employee responsible for the modification proposal shall execute the
following certification:
CERTIFICATE OF PROCUREMENT INTEGRITY-MODIFICATION (NOV 1990)
(1) I,_______________________________________(Name of certifier) am the
officer or employee responsible for the preparation of this modification
proposal and hereby certify that, to the best of my knowledge and belief, with
the exception of any information described in this certification, I have no
information concerning a violation or possible violation of subsection 27(a),
(b), (d), or (f) of the Office of Federal Procurement Policy Act, as amended*
(41 U.S.C. 423), (hereinafter referred to as "the Act"), as implemented in the
FAR, occurring during the conduct of this procurement_________________________
(contract and modification number).
(2) As required by subsection 27(e)(1)(B) of the Act, I further certify that
to the best of my knowledge and belief, each officer, employee, agent,
representative, and consultant of______________________________________________
(Name of Offeror) who has participated personally and substantially in the
preparation or submission of this proposal has certified that he or she is
familiar with, and will comply with, the requirements of subsection 27(a) of the
Act, as implemented in the FAR, and will report immediately to me any
information concerning a violation or possible violation of subsections 27(a),
(b), (d), or (f) of the Act, as implemented in the FAR, pertaining to this
procurement.
Page 70
DTCG38-95-D-20018
SECTION I - CONTRACT CLAUSES
I-2. REQUIREMENT FOR CERTIFICATE OF PROCUREMENT INTEGRITY-MODIFICATION.
(NOV 1990) 52.203-9 (Cont'd)
(3) Violations or possible violations: (Continue on plain bond paper if
necessary and label Certificate of Procurement Integrity-Modification
Continuation Sheet, ENTER NONE IF NONE EXISTS)
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
(Signature of the officer or employee responsible for the
modification proposal and date)
----------------------------------------------------------------------
(Typed name of the officer or employee responsible for the
modification proposal)
* Subsections 27 (a), (b), and (d) are effective on December 1, 1990.
Subsection 27(f) is effective on June 1, 1991.
THIS CERTIFICATION CONCERNS A MATTER WITHIN THE JURISDICTION OF AN AGENCY OF
THE UNITED STATES AND THE MAKING OF A FALSE, FICTITIOUS, OR FRAUDULENT
CERTIFICATION MAY RENDER THE MAKER SUBJECT TO PROSECUTION UNDER XXXXX 00, XXXXXX
XXXXXX CODE, SECTION 1001.
(End of certification)
(d) In making the certification in paragraph (2) of the certificate, the
officer or employee of the competing Contractor responsible for the offer or
bid, may rely upon a one-time certification from each individual required to
submit a certification to the competing Contractor, supplemented by periodic
training. These certifications shall be obtained at the earliest possible date
after an individual required to certify begins employment or association with
the Contractor. If a Contractor decides to rely on a certification executed
prior to the suspension of section 27 (i.e., prior to December 1, 1989), the
Contractor shall ensure that an individual who has so certified is notified that
section 27 has been reinstated. These certifications shall be maintained by the
Contractor for a period of 6 years from the date a certifying employee's
employment with the company ends or, for an agency, representative, or
consultant, 6 years from the date such individual ceases to act on behalf of the
Contractor.
(e) The certification required by paragraph (c) of this clause is a material
representation of fact upon which reliance will be placed in executing this
modification.
(End of clause)
I-3. RESERVED.
Page 71
DTCG38-95-D-20018
SECTION I - CONTRACT CLAUSES
I-4. PREFERENCE FOR LABOR SURPLUS AREA CONCERNS. (APR 1984) 52.220-1
(a) This acquisition is not a set aside for labor surplus area (LSA)
concerns. However, the offeror's status as such a concern may affect (1)
entitlement to award in case of tie offers or (2) offer evaluation in accordance
with the Buy American Act clause of this solicitation. In order to determine
whether the offeror is entitled to a preference under (1) or (2) above, the
offeror must identify, below, the LSA in which the costs to be incurred on
account of manufacturing or production (by the offeror or the first-tier
subcontractors) amount to more than 50 percent of the contract price.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
(b) Failure to identify the locations as specified above will preclude
consideration of the offeror as an LSA concern. If the offeror is awarded a
contract as an LSA concern and would not have otherwise qualified for award, the
offeror shall perform the contract or cause the contract to be performed in
accordance with the obligations of an LSA concern.
(End of provision)
I-5. RESERVED.
I-6. LOCAL HIRE. (OCT 1994) TAR 1252.220-90
The contractor shall employ, for the purpose of performing this contract in
whole or in part in a State that has an unemployment rate in excess of the
national average rate of unemployment (as defined by the Secretary of Labor),
individuals who are local residents and who, in the case of any craft or trade,
possess or would be able to acquire promptly the necessary skills. Local
Resident means a resident or an individual who commutes daily to that state.
(End of clause)
I-7. DISSEMINATION OF CONTRACT INFORMATION. (OCT 1994) TAR 1252.242-72
The contractor shall not publish, permit to be published, or distribute for
public consumption, any information, oral or written, concerning the results or
conclusions made pursuant to the performance of this contract, without the prior
written consent of the Contracting Officer. Two copies of any material proposed
to be published or distributed shall be submitted to the Contracting Officer.
(End of clause)
Page 72
DTCG38-95-D-20018
PART III
SECTION 2 - LIST OF ATTACHMENTS
Attachment 1: U.S. Coast Guard Component Repair Record (CRR)
Attachment 2: DOT F 4220.43, Contractor Report of Government Property
Attachment 3: Replacement Parts Usage Rates
Attachment 4: Coast Guard Specific Servo Replacement Parts Requirements
----------------------------------------------------------------------
U.S. COAST GUARD
COMPONENT REPAIR RECORD
----------------------------------------------------------------------
THIS FORM IS USED TO REPORT MAINTENANCE ACTIONS PERFORMED ON COAST GUARD
COMPONENTS BY OVERHAUL / REPAIR FACILITIES
--------------------------------------------------------------------------------
PART NAME CEI NUMBER SERIAL NUMBER
--------------------------------------------------------------------------------
-----------------------
--------------------------------------------------------------------------------
PART NUMBER: NSN:
---------------------------- ---------------------------------
THE COMPLETED FORM TO BE PROVIDED TO:
ORIGINAL TO: COPY 1: COPY 2:
TAMSCO PACKAGED WITH THE ATTACHED TO INVOICE
0000 XXXXXX XXXXX OVERHAULED / REPAIRED
XXXXX 000 XXXXXXXXX
XXXXXXXXXX, XX 00000
ATTN: ACMS
--------------------------------------------------------------------------------
OVERHAUL / REPAIR FACILITY TO COMPLETE ALL INFORMATION IN SHADED REGION
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
TSN MANUFACTURER:
------------- --------------------
TSO DATE OF MANUFACTURE:
------------- --------------------
THE FOLLOWING NARRATIVE SUMMARIZES THE WORK PERFORMED ON THIS COMPONENT
DURING THE COURSE OF THIS OVERHAUL / REPAIR.
-----------------------------------------------------------------------------
-------------------------------------------------------------------------
-------------------------------------------------------------------------
-------------------------------------------------------------------------
-------------------------------------------------------------------------
-------------------------------------------------------------------------
-------------------------------------------------------------------------
-----------------------------------------------------------------------------
OVERHAUL/REPAIR FACILITY: WORK ORDER NO:
------------ --------------------
DATE WORK COMPLETED: / / ITEM BEYOND ECONOMICAL REPAIR
--------------------------------------------------------------------------------
THE FOLLOWING MAINTENANCE ACTIONS WERE COMPLIED WITH DURING THE COURSE OF
THIS OVERHAUL / REPAIR.
/ / ----------------------------
FOR ACMS CONTRACTOR USE ONLY
----------------------------
DISENROLLED (SCRAP ITEMS)___
SCH ENTRIES COMPLETED ___
DATA ENTRY COMPLETED ___
DATE ___
----------------------------
-----------------------------------------------
AUTHORIZED SIGNATURE OR QUALITY ASSURANCE STAMP
------------------------------------------------------------------------------------------------------------------------------------
CONTRACTOR REPORT OF
GOVERNMENT PROPERTY
------------------------------------------------------------------------------------------------------------------------------------
Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for
reviewing instructions searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the
collection of information. Send comments regarding this burden estimate of any aspect of this collection of information, including
suggestions for reducing this burden, to the FAR Secretaries (VRS), Office of Federal Acquisition and Regulatory Xxxxxx, XXX,
Xxxxxxxxxx, X.X. 00000; and to the Office of Management and Budget, Paperwork Reduction Project (2106-0617), Xxxxxxxxxx, X.X. 00000.
------------------------------------------------------------------------------------------------------------------------------------
1. Contract Number:
----------------------------------------------------------------------------------------------------------
2. Report Period Ending:
----------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------
3. Contractor (Name and Address) 4. Contracting Office (Names and Address)
------------------------------------------------------------------------------------------------------------------------------------
5. Name and location of Government-Owned, Contractor-Operated Plant (if applicable)
------------------------------------------------------------------------------------------------------------------------------------
6. Any Government property located at a subcontractor's plant? ___ Yes ___ No. If yes, give the name and address of the
subcontractor(s) on an attached sheet to this report.
------------------------------------------------------------------------------------------------------------------------------------
7. Date contractor's property control system approved?
------------------------------------------------------------------------------------------------------------------------------------
8. Approved by whom?
--------------------------------------
Name of Agency/Office
------------------------------------------------------------------------------------------------------------------------------------
9 Starting Balance Ending Balance
------------------------------- -------------------------------
Total Total Total Total
Property Acquisition Quantity Items Items Acquisition Quantity
Class Cost (in acres Added Deleted Cost in acres
(Set FAR 45.5) (in dollars) or units) in $ in $ (in dollars) or units)
------------------------------------------------------------------------------------------------------------------------------------
a. Land & Rights Therein
------------------------------------------------------------------------------------------------------------------------------------
b. Other Real Property
------------------------------------------------------------------------------------------------------------------------------------
c. Plant Equipment
------------------------------------------------------------------------------------------------------------------------------------
d. Special Test Equipment
------------------------------------------------------------------------------------------------------------------------------------
e. Special Tooling
------------------------------------------------------------------------------------------------------------------------------------
f. Materials in Stock (when total
value exceeds $50.000)
------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------
NOTE: This report shall include all Government property (i.e., property furnished by the Government, or acquired or fabricated by
the contractor or subcontractors). By signature hereon, the contractor's property administrator certifies that the report was
prepared from the contractor's records that are required by FAR 45.5.
------------------------------------------------------------------------------------------------------------------------------------
10. Typed Name of Contractor Property Administrator 11. Signature and Date
------------------------------------------------------------------------------------------------------------------------------------
USAGE RATES FOR SEPARATELY PRICED REPLACEMENT PARTS
Note: Rework and overhaul rates are grouped together.
a. Section B, Item 1:
1620-14-459-0511 LEG, LH MAIN LG P/N 00000-000-00
P/N NOMENCLATURE PERCENTAGE
17975 CONTACTOR UNIT ASSY 7
18802 UNION 1
00000-000-00 LH HOUSING 39
18979 SHAFT 57
18980 SHAFT 61
18981 SWIVEL PIN 9
00000-000-00 XXXX 57
19217 CABLE 1
19828-100 FLEX HOSE 9
20529-100 HOSE 1
00000-000-00 SINGLE PIECE BEARING 50
b. Section B, Item 2:
1620-14-462-8049 LEG, RH MAIN LG P/N 00000-000-00
P/N NOMENCLATURE PERCENTAGE
17975 CONTACTOR UNIT ASSY 7
18130 ROLLER 1
18802 UNION 1
00000-000-00 RH HOUSING 47
18979 SHAFT 41
18980 SHAFT 50
18981 SWIVEL PIN 3
00000-000-00 XXXX 56
19217 CABLE 6
19828-100 FLEX HOSE 3
20529-100 HOSE 1
00000-000-00 SINGLE PIECE BEARING 50
Attachment 3
USAGE RATES FOR SEPARATELY PRICED REPLACEMENT PARTS (Cont'd)
c. Section B, Items 3, 4, 5:
1620-14-459-0514 AUX LANDING GEAR P/N 00000-000-00 or -07
P/N NOMENCLATURE PERCENTAGE
00000-000-00 HOUSING 25
18907 UPPER BEARING 1
00000-000-00 BEARING POST 59
18922 PISTON TUBE 10
18926 XXXXX XXXXXXX 00
00000 XXXXX PISTON SHAFT 65
18932 LOWER BEARING 29
19010 SHAFT 53
19324 AXLE 6
19465 YOKE 88
d. Section B, Item 6:
1650-14-043-0964 ACTUATOR CYL P/N 19570-101
P/N NOMENCLATURE PERCENTAGE
17946 BUSHING 50
18787-100 HOSE ASSY 15
18788-100 HOSE ASSY 25
18789-100 HOSE ASSY 45
19640 BALL FITTING ASSY 50
19645 BODY ASSY 25
19713 BUSHING 25
19727 PISTON 10
19731 CLAW 10
19870 HARNESS CABLE 10
e. Section B, Item 7:
1650-14-387-2620 ACTUATOR CYLINDER P/N 19575-101
P/N NOMENCLATURE PERCENTAGE
18789-100 HOSE ASSY 25
18790-100 HOSE ASSY 5
18791-100 HOSE ASSY 5
19640 BALL FITTING ASSY 50
19716-100 HOUSING ASSY 25
19713 BUSHING 25
19727 PISTON 10
19731 CLAW 10
19880 HARNESS CABLE 5
2
USAGE RATES FOR SEPARATELY PRICED REPLACEMENT PARTS (Cont'd)
f. Section B, Items 8, 9:
1650-14-463-8804 PUMP, SELF REGULATING P/N C24160022-1
P/N NOMENCLATURE PERCENTAGE
A81953-2 END FITTING 10
GA70926-1 SWASH PLATE ASSY 25
GA70657-2 BLOCK ASSY 00
x. Xxxxxxx X, Xxxxx 00, 00:
1650-14-451-4636 SERVO CONTROL P/N SC8033-1
P/N NOMENCLATURE PERCENTAGE
800600 FILTER 1
801271 BODY 11
802170 CIRCUIT BOARD 11
807763 SWITCH 3
h. Section B, Items 12, 13:
1650-14-448-1729 SERVO CONTROL P/N SC8034-1
P/N NOMENCLATURE PERCENTAGE
800600 FILTER 1
801271 BODY 2
801400 CUP ASSEMBLY 39
802170 CIRCUIT BOARD 4
807763 SWITCH 37
i. Section B, Item 14:
1650-14-404-8798 SERVO, TAIL ROTOR P/N SC7282
P/N NOMENCLATURE PERCENTAGE
288033950 BODY 10
801152 SWITCH 48
801189 LOCK PLATE 67
801195 TIE ROD 6
803858 COVER 6
805189 PISTON 45
3
USAGE RATES FOR SEPARATELY PRICED REPLACEMENT PARTS (Cont'd)
j. Section B, Item 15:
6110-14-401-5731 L. G. REGULATOR P/N 97168-100
P/N NOMENCLATURE PERCENTAGE
97241-120 ELECTRO DISTRIBUTOR 25
k. Section B, Item 16:
6615-14-393-8808 HYDRAULIC REGULATOR P/N 97166-100
P/N NOMENCLATURE PERCENTAGE
97271-120 ELECTRO DISTRIBUTOR 25
l. Section B, Item 17:
1620-14-406-3536 HYDRAULIC REGULATOR P/N 97166-300
P/N NOMENCLATURE PERCENTAGE
97271-120 ELECTRO DISTRIBUTOR 25
4
COAST GUARD SPECIFIC
SERVO REPLACEMENT PARTS REQUIREMENTS
The following replacement parts will be utilized as required. These designations
represent a deviation from the Component Maintenance Manual as directed by USCG
ARSC Engineering.
SC 8033-1
PART NUMBER DESIGNATION A B C D CMM
--------------------------------------------------------------------
21 800246 0 XXXX *
24 800104 0 SHIM ***
24 800278 0 BEARING **
24 800600 0 FILTER *
24 807763 0 REVERSING SWITCH *
25 801341 0 PLATE *
25 801346 0 SHAFT *
25 801349 0 WASHER *
25 801352 0 LEVER *
27 800630 0 ROTARY VALVE (repaired) *
SC 8034-1
PART NUMBER DESIGNATION A B C D CMM
--------------------------------------------------------------------
21 800246 0 XXXX *
24 800104 0 SHIM ***
24 800278 0 BEARING **
24 800600 0 FILTER *
24 801010 0 FILTER *
24 807763 0 REVERSING SWITCH *
25 801341 0 PLATE *
25 801346 0 SHAFT *
25 801349 0 WASHER * *
25 801352 0 LEVER * *
27 800630 0 ROTARY VALVE (repaired) * *
* Inspect and repair or replace as required.
** 100% systematic replacement until P/N 802911 Stainless Steel Bearings are
installed; then inspect and replace as required.
*** 100% replacement when P/N 800135 or P/N 800129 is replaced. Otherwise,
inspect and repair or replace as required.
Attachment 4
