Wood Products Sample Clauses

Wood Products. Only Farmers may sell wood products (e.g. firewood, mulch chips, rough-cut wood, and baskets made from vine and woven wood). Farmers must obtain wood products from property they own or rent.
Sample 1Sample 2See All (4)
AutoNDA by SimpleDocs
Wood Products. Any RFP, bid, or other response to a for RFP or bid which proposes or calls for the use of any tropical hardwood or tropical wood product in performance of the Contract shall be deemed non-responsive. The Contractor shall not provide any items in performance of this Contract which are tropical hardwoods or tropical hardwood products. The County of Santa Xxxx urges companies not to import, purchase, obtain, or use for any purpose, any tropical hardwood or tropical hardwood product. In the event any respondent or Contractor fails to comply in good faith with any of the provisions of County Code Section 2.37.107, the respondent or Contractor shall be liable for liquidated damages in an amount equal to the respondents or Contractors net profit under the Contract, or five percent of the total amount of the Contract Sum, whichever is greater. The Contractor acknowledges and agrees that the liquidated damages assessed shall be payable to the County upon demand and may be set off against any monies due to the respondent or Contractor from any contract with the County.
Sample 1
Wood Products. (AUG 2008)
Sample 1
Wood Products. For all new installations of wood products, the Tenant is encouraged to use independently certified forest products. For information on certification and certified wood products, refer to the Forest Stewardship Council United States (wxx.xxxxx.xxx).
Sample 1
Wood Products. Century warrants wood products for one (1) year when put to ordinary, indoor residential use, subject to the limitations set forth below. Stone, Glass, and Mirror Surfaces: Century warrants stone, glass, mirror and all other non-wood surfaces for one (1) year when put to ordinary residential use. Please note that many stone surfaces have natural pits and voids which may or may not be filled with resin depending on the desired look and design of the product designer. These pits and voids are not considered defects unless excessive in size. Mirrored surfaces will often be antiqued and silver-leaf mirror backs will often have small character marks that are not considered defects. Mirror glass is sometimes hand cut/beveled and will show slight movement/waves in the bevel edge which is not considered a defect. Finishes: Century warrants standard finishes on wood surfaces for one (1) year when put to ordinary residential use. Please note that the beauty of veneer and all wood products comes from the variations created by nature including color, grain, and texture. These variations are not considered defects and this Warranty does not cover color, grain, and texture variations associated with natural wood and grain seen in any finish color. Hardware: Century warrants casegoods hardware including pulls, handles, hinges, and locks for three (3) years when put to ordinary residential use. When available, replacement hardware will be provided for valid Warranty claims. If matching replacement hardware is not available, then Century will provide a set of similar hardware for the single wood product unit. Century warrants functional drawer glides for seven (7) years when put to ordinary residential use. Lighting: Century warrants lighting products (includes table lamps, floor lamps, chandeliers, and lighting within casegood products) for one (1) year when put to ordinary residential use. Outdoor Aluminum, Steel/Stainless Steel, Teak, and Mahogany Frames: Century warrants aluminum, steel/stainless steel, teak, and mahogany frames for two (2) years when put to ordinary residential use. Please note that this Warranty does not cover the finish. The finish will age with exposure to weather elements and regular maintenance is required to preserve the finish. Woven: Century warrants woven products for two (2) years when put to ordinary residential use. Swivel, Rocker, and Casters: Century warrants, swivel, rocker, and casters for a period of three (3) years when put to ordina...
Sample 1

Related to Wood Products

  • Products Products available under this Contract are limited to Software, including Software as a Service, products and related products as specified in Appendix C, Pricing Index. Vendor may incorporate changes to their product offering; however, any changes must be within the scope of products awarded based on the posting described in Section 1.B above. Vendor may not add a manufacturer’s product line which was not included in the Vendor’s response to the solicitation described in Section 1.B above.

  • New Products You agree to comply with NASD Notice to Members 5-26 recommending best practices for reviewing new products.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Competing Products The provisions of Section 21 are set forth on attached Exhibit H and are incorporated in this Section 21 by this reference.

  • Other Products After clinical or other evidence, provided in writing [***] to Company, demonstrating the practicality of a particular market or use within the LICENSED FIELD which is not being developed or commercialized by Company, Company shall either provide JHU with a reasonable development plan and start development or attempt to reasonably sublicense the particular market or use to a third party. If within six (6) months of such notification [***] Company has not initiated such development efforts or sublicensed that particular market or use, JHU may terminate this license for such particular market or use. This Paragraph shall not be applicable if Company reasonably demonstrates to JHU that commercializing such LICENSED PRODUCT(S) or LICENSED SERVICE(S) or granting such a sublicense in said market or use would have a potentially adverse commercial effect upon marketing or sales of the LICENSED PRODUCT(S) developed and being sold by Company.

  • Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.

  • Combination Products If a LICENSED PRODUCT is sold to any third party in combination with other products, devices, components or materials that are capable of being sold separately and are not subject to royalties hereunder (“OTHER PRODUCTS,” with the combination of products being referred to as “COMBINATION PRODUCTS” and the Other Product and Licensed Product in such Combination Product being referred to as the “COMPONENTS”), the NET SALES of such LICENSED PRODUCT included in such COMBINATION PRODUCT shall be calculated by multiplying the NET SALES of the COMBINATION PRODUCT by the fraction A/(A+B), where A is the average NET SALES price of such LICENSED PRODUCT in the relevant country, as sold separately, and B is the total average NET SALES price of all OTHER PRODUCTS in the COMBINATION PRODUCT in the relevant country, as sold separately. If, in any country, any COMPONENT is not sold separately, NET SALES for royalty determination shall be determined by the formula [C / (C+D)], where C is the aggregate average fully absorbed cost of the Licensed Product components during the prior Royalty Period and D is the aggregate average fully absorbed cost of the other essential functional components during the prior Royalty Period, with such costs being determined in accordance with generally accepted accounting principles. To the extent that any SUBLICENSE INCOME relates to a COMBINATION PRODUCT or is otherwise calculated based on the value of one or more licenses or intellectual property rights held by the COMPANY, an AFFILIATE or SUBLICENSEE, COMPANY shall determine in good faith and report to THE PARTIES the share of such payments reasonably attributable to COMPANY’s or such AFFILIATE’s sublicense of the rights granted hereunder, based upon their relative importance and proprietary protection, which portion shall be the SUBLICENSE INCOME. THE PARTIES shall have the right to dispute such sharing determination in accordance with the dispute provisions of the AGREEMENT.

  • Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.

  • Company Products Section 2.7(c) of the Company Disclosure Letter sets forth a list (by name and version number) of all products, software or service offerings of the Company or any of its Subsidiaries (collectively, “Company Products”) that are currently being sold, distributed, provided or otherwise disposed of, or which the Company or any of its Subsidiaries currently supports or is obligated to support or maintain, or any products or services under development which the Company intends to make commercially available within 12 months of the date hereof.

  • API If the Software offers integration capabilities via an API, your use of the API may be subject to additional costs or Sage specific policies and terms and conditions (which shall prevail in relation to your use of the API). You may not access or use the API in any way that could cause damage to us or the Software, or in contravention of any applicable laws. We reserve the right in our sole discretion, to: (i) update any API from time to time; (ii) place limitations around your use of any API; and (iii) deny you access to any API in the event of misuse by you or to otherwise protect our legitimate interests.

Time is Money Join Law Insider Premium to draft better contracts faster.