Wind Loading Sample Clauses

Wind Loading. The SRU and mounts are designed to operate under wind gusts or sustained loads of up to 145 km/hr, and survive up to 200 km/hr.
AutoNDA by SimpleDocs
Wind Loading. The fabricated Aluminium Partitions, Aluminium doors and windows shall be capable of withstanding a wind pressure load not less than 1500 Pascals (75 M.P.H.)
Wind Loading. 2.3.1.4.1 Operational Designed to operate up to 90 mph (145 kph)
Wind Loading. All poles and other structures installed in the ROW must be designed to the current version of the AASHTO for wind and load calculations.
Wind Loading. As indicated on Drawings

Related to Wind Loading

  • Keys and Locks Landlord will furnish Tenant, free of charge, two keys to each door or lock in the Premises. Landlord may make a reasonable charge for any additional or replacement keys. Tenant will not duplicate any keys, alter any locks or install any new or additional lock or bolt on any door of its Premises or on any other part of the Building without the prior written consent of Landlord and, in any event, Tenant will provide Landlord with a key for any such lock. On the termination of the Lease, Tenant will deliver to Landlord all keys to any locks or doors in the Building which have been obtained by Tenant.

  • Floor Loading Floor loading capacity shall be within building design capacity. Tenant may exceed floor loading capacity with Landlord’s consent, at Landlord’s sole discretion and must, at Tenant’s sole cost and expense, reinforce the floor as required for such excess loading.

  • Time and Location The closing of the transactions contemplated by this Agreement (the “Closing”) shall take place at the offices of Xxxxxx Xxxxxx Xxxxxxxxx Xxxx and Xxxx LLP in Boston, Massachusetts, commencing at 10:00 a.m., local time, on October 31, 2005, or, if all of the conditions to the obligations of the Parties to consummate the transactions contemplated hereby (excluding the delivery of any documents to be delivered at the Closing by any of the Parties and other than satisfaction of those conditions that by their terms are to be satisfied or waived at Closing, it being understood that the occurrence of the Closing shall remain subject to the delivery of such documents and the satisfaction or waiver of such conditions) have not been satisfied or waived by such date, on such mutually agreeable later date as soon as practicable (but in no event more than three Business Days (as defined below)) after the first date on which the conditions to the obligations of the Parties to consummate the transactions contemplated hereby (excluding the delivery of any documents to be delivered at the Closing by any of the Parties and other than satisfaction of those conditions that by their terms are to be satisfied or waiver at Closing, it being understood that the occurrence of the Closing shall remain subject to the delivery of such documents and the satisfaction or waiver of such conditions) have been satisfied or waived (the “Closing Date”). For purposes of this Agreement, a “Business Day” shall be any day other than (i) a Saturday or Sunday or (ii) a day on which banking institutions located in New York, New York are permitted or required by law, executive order or governmental decree to remain closed.

  • Loading RPMG shall schedule the loading and shipping of all outbound corn oil purchased hereunder, but all labor and equipment necessary to load trucks and rail cars and other associated costs shall be supplied and borne by Producer without charge to RPMG. Producer shall handle the corn oil in a good and workmanlike manner in accordance with RPMG’s written requirements and normal industry practice. Producer shall maintain the truck and rail loading facilities in safe operating condition in accordance with normal industry standards and shall visually inspect all trucks and rail cars to assure (i) cleanliness so as to avoid contamination, and (ii) that such trucks and railcars are in a condition suitable for transporting the corn oil. RPMG and RPMG’s agents shall have adequate access to the Ethanol Facility to load Producer’s corn oil on an industry standard basis that allows RPMG to economically market Producer’s corn oil. RPMG’s employees shall follow all reasonable safety rules and procedures promulgated by Producer and provided to RPMG reasonably in advance and in writing. Producer shall supply product description tags, certificates of analysis, bills of lading and/or material safety data sheets that are applicable to all shipments. In the event that Producer fails to provide the labor, equipment and facilities necessary to meet RPMG’s loading schedule, Producer shall be responsible for all costs and expenses, including without limitation actual demurrage and wait time, incurred by RPMG resulting from or arising in connection with Producer’s failure to do so.

  • Names and Locations Except as set forth on the attached NAMES AND LOCATIONS SCHEDULE, during the five-year period prior to the execution and delivery of this Agreement, the Company has not used any name or names under which it has invoiced account debtors, maintained records concerning its assets or otherwise conducted business. All of the tangible assets and properties of the Company are located at the locations set forth on the NAMES AND LOCATIONS SCHEDULE.

  • Names and Location The Seller has not used any company names, trade names or assumed names other than its name set forth on the signature pages of this Agreement. The Seller is “located” (as such term is defined in the applicable UCC) in Delaware. The office where the Seller keeps its records concerning the Receivables is at the address set forth below its signature to this Agreement.

  • Floor Load Tenant shall not place a load upon any floor of the Premises that exceeds 50 pounds per square foot “live load”. Landlord reserves the right to reasonably designate the position of all Equipment which Tenant wishes to place within the Premises, and to place limitations on the weight thereof.

  • Underground Tanks If underground or other storage tanks storing Hazardous Materials located on the Premises or the Project are used by Tenant or are hereafter placed on the Premises or the Project by Tenant, Tenant shall install, use, monitor, operate, maintain, upgrade and manage such storage tanks, maintain appropriate records, obtain and maintain appropriate insurance, implement reporting procedures, properly close any underground storage tanks, and take or cause to be taken all other actions necessary or required under applicable state and federal Legal Requirements, as such now exists or may hereafter be adopted or amended in connection with the installation, use, maintenance, management, operation, upgrading and closure of such storage tanks.

  • Storage The ordering agency is responsible for storage if the contractor delivers within the time required and the agency cannot accept delivery.

  • Name and Location The name of the Partnership is “DCT—TX 2004 RN Portfolio L LP” The address of the registered office of the Partnership in the State of Delaware is located at 0000 Xxxxxxxxxxx Xxxx, Xxxxx 000, Xxxxxxxxxx, Xxxxxxxx 00000, and the registered agent for service of process on the Partnership in the State of Delaware at such registered office is Corporation Service Company. The principal office of the Partnership is 000 00xx Xxxxxx, Xxxxx 0000, Xxxxxx, Xxxxxxxx 00000, or such other place as the General Partner may from time to time designate by notice to the Limited Partner. The Partnership may maintain offices at such other place or places within or outside the State of Delaware as the General Partner deems advisable.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!