WARRANTY AND MAINTENANCE SERVICES Sample Clauses

WARRANTY AND MAINTENANCE SERVICES. At any time during the Warranty Period or MCP, as applicable, Supplier shall provide the following warranty or maintenance services (including unlimited telephonic support and all necessary travel and labor) to maintain the Solution in accordance with the Requirements. During the Warranty Period, Supplier shall perform these services without additional charge to VDSS. During the Maintenance Coverage Period, charges will be in accordance with the terms of this section and Exhibit B. Known Defects Supplier shall promptly notify VDSS in writing of any defects or malfunctions in the Solution or Documentation of which it learns from any source. Within two (2) calendar days of Supplier's knowledge of any defects or malfunctions, Supplier shall correct the defects or malfunctions, or provide a work around until corrected, and provide VDSS with corrected copies of same. New Releases No later than the first day of general release, Supplier shall provide to VDSS copies of the Software and Documentation revised to reflect any enhancements, including all new releases, upgrades, and access modes, to the Software made by Supplier, including, without limitation, modifications to the Software which can increase the speed, efficiency or base of operation of the Software or add additional capabilities to or otherwise improve the functionality of the Software.
Sample 1Sample 2See All (4)
AutoNDA by SimpleDocs
WARRANTY AND MAINTENANCE SERVICES. ‌ At any time during the Warranty or Maintenance Period, as applicable, Supplier shall provide the following warranty or maintenance services (including unlimited telephonic support and all necessary travel and labor) to maintain the Solution in accordance with the Requirements. During the Warranty Period, such services shall be performed without additional charge to any Authorized User. During the Maintenance Period, charges shall be in accordance with this Section and Exhibit B.
Sample 1See All (4)
WARRANTY AND MAINTENANCE SERVICES. (a) During the Warranty Period, if warranty work is necessary, Vendor will, at its option (i) repair the System in place or (ii) accept return of components of the System for repair or replacement. Such repair or replacement, including both parts and labor, will be at Vendor’s expense. Repair and replacement parts may be new or like new.
Sample 1Sample 2
WARRANTY AND MAINTENANCE SERVICES. At any time during the Warranty Period or MCP, as applicable, Supplier shall provide the following warranty or maintenance services (including unlimited telephonic support and all necessary travel and labor) to maintain the Solution in accordance with the Requirements. During the Warranty Period, Supplier shall perform these services without additional charge to VDOT. During the Maintenance Coverage Period, charges will be in accordance with the terms of this section and Exhibit B.
Sample 1
WARRANTY AND MAINTENANCE SERVICES. Supplier shall provide the following warranty or maintenance services (including unlimited telephonic support and all necessary travel and labor) to maintain the Solution in accordance with the Requirements. Supplier shall perform these services without additional charge to OAG. Known Defects Supplier shall promptly notify OAG in writing of any defects or malfunctions in the Solution or Documentation of which it learns from any source. Within XX (XX) calendar days of Supplier's knowledge of any defects or malfunctions, Supplier shall correct the defects or malfunctions, or provide a work around until corrected, and provide OAG with corrected copies of same. New Releases No later than the first day of general release, Supplier shall provide to OAG copies of the Software and Documentation revised to reflect any enhancements, including all new releases, upgrades, and access modes, to the Software made by Supplier, including, without limitation, modifications to the Software which can increase the speed, efficiency or base of operation of the Software or add additional capabilities to or otherwise improve the functionality of the Software.
Sample 1
WARRANTY AND MAINTENANCE SERVICES. Supplier shall provide Warranty and Maintenance Services ("Maintenance Services") at no charge during the applicable Warranty Period. Such services shall be performed to the complete satisfaction of Company, shall be performed in accordance with generally accepted industry standards and shall be in accordance with such requirements or restrictions as may be lawfully imposed by governmental authority. Ongoing technical support shall be available on a **************************************************** *****************. Supplier will keep on file with Company's Technical Representative and Company's Agreement Representative, a list of specified personnel with current work, fax and automated pager system numbers who will be available for immediate contact in emergency or service impairing situations. CONFIDENTIAL MATERIAL OMITTED AND FILED SEPARATELY WITH THE COMMISION. ASTERISKS DENOTE SUCH OMISSIONS.
Sample 1

Related to WARRANTY AND MAINTENANCE SERVICES

  • Maintenance Services Subject to Client’s timely payment of the applicable maintenance fees, Accenture will make available the following maintenance services (“Maintenance Services”):

  • Operation and Maintenance 17.1 O&M obligations of the Concessionaire

  • Support and Maintenance Where Licensee purchases support and/or maintenance services, Licensee’s initial support and/or maintenance term will begin upon delivery to Licensee of the Licensed Software and continue for one (1) year thereafter (or the length of the term if less than a year for any subscription/term license) unless otherwise specified in the applicable annual support and/or maintenance agreement, Product Order, or other written agreement executed between Licensor and Licensee. Where Licensee purchases support and/or maintenance for any Licensed Software, Licensee hereby agrees that it shall purchase such support and/or maintenance services for all of Licensee’s licensed units of such Licensed Software product. Support and/or maintenance services provided by Licensor will be subject to Licensor’s then current applicable standard annual support and/or maintenance agreement unless otherwise agreed by the parties in writing.

  • USE AND MAINTENANCE (a) Lessee shall (1) use the Equipment solely in the continental United States and in the conduct of its business, for the purpose for which the Equipment was designed, in a careful and proper manner, and shall not permanently discontinue use of the Equipment; (2) operate, maintain, service and repair the Equipment, and maintain all records and other materials relating thereto, (A) in accordance and consistent with (i) the Supplier’s recommendations and all maintenance and operating manuals or service agreements, whenever furnished or entered into, including any subsequent amendments or replacements thereof, issued by the Supplier or service provider, (ii) the requirements of all applicable insurance policies, (iii) the Supply Contract, so as to preserve all of Lessee's and Lessor's rights thereunder, including all rights to any warranties, indemnities or other rights or remedies, (iv) all applicable laws, and (v) the prudent practice of other similar companies in the same business as Lessee, but in any event, to no lesser standard than that employed by Lessee for comparable equipment owned or leased by it; and (B) without limiting the foregoing, so as to cause the Equipment to be in good repair and operating condition and in at least the same condition as when delivered to Lessee hereunder, except for ordinary wear and tear resulting despite Lessee's full compliance with the terms hereof; (3) provide written notice to Lessor not less than thirty (30) days after any change of the location of any Equipment (or the location of the principal garage of any Equipment, to the extent that such Equipment is mobile equipment) as specified in the Schedule; and (4) not attach or incorporate the Equipment to or in any other property in such a manner that the Equipment may be deemed to have become an accession to or a part of such other property. (b) Within a reasonable time, Lessee will replace any parts of the Equipment which become worn out, lost, destroyed, damaged beyond repair or otherwise unfit for use, by new or reconditioned replacement parts which are free and clear of all Liens and have a value, utility and remaining useful life at least equal to the parts replaced (assuming that they were in the condition required by this Lease). Any modification or addition to the Equipment that is required by this Lease shall be made by Lessee. Title to all such parts, modifications and additions to the Equipment immediately shall vest in Lessor, without any further action by Lessor or any other person, and they shall be deemed incorporated in the Equipment for all purposes of the related Schedule. Unless replaced in accordance with this Section, Lessee shall not remove any parts originally or from time to time attached to the Equipment, if such parts are essential to the operation of the Equipment, are required by any other provision of this Lease or cannot be detached from the Equipment without materially interfering with the operation of the Equipment or adversely affecting the value, utility and remaining useful life which the Equipment would have had without the addition of such parts. Except as permitted in this Section, Lessee shall not make any material alterations to the Equipment that diminishes its use or value. (c) Upon forty-eight (48) hours' notice, Lessee shall afford Lessor and/or its designated representatives access to the premises where the Equipment is located for the purpose of inspecting such Equipment and all applicable maintenance or other records relating thereto at any reasonable time during normal business hours; provided, however, if a Default or Event of Default shall have occurred and then be continuing, no notice of any inspection by Lessor shall be required. If any discrepancies are found as they pertain to the general condition of the Equipment, Lessor will communicate these discrepancies to Lessee in writing. Lessee shall then have thirty (30) days to rectify these discrepancies at its sole expense. Lessee shall pay all expenses of a re-inspection by Lessor’s appointed representative, if corrective measures were required.

  • Maintenance and Support Services As long as you are not using the Help Desk as a substitute for our training services on the Tyler Software, and you timely pay your maintenance and support fees, we will, consistent with our then-current Support Call Process:

  • Software Maintenance Subrecipient shall apply security patches and upgrades in a timely manner and keep virus software up-to-date on all systems on which State data may be stored or accessed.

  • Installation and Maintenance of Meters The Servicer shall cause to be installed, replaced and maintained meters in accordance with the Servicer Policies and Practices.

  • Support Services HP’s support services will be described in the applicable Supporting Material, which will cover the description of HP’s offering, eligibility requirements, service limitations and Customer responsibilities, as well as the Customer systems supported.

  • TAX SUPPORT SERVICES BNY Mellon shall provide the following tax support services for each Fund:  Provide various data and reports as agreed upon in the SLDs to support TRP’s tax reporting and tax filing obligations, including: · Wash sales reporting; · QDI reporting; · DRD reporting; · PFIC analysis; · Straddle analysis; · Paydown adjustments; · Equalization debit adjustments · Tax compliance under §851, §817(h); · Foreign bond sale analysis (§988); · Troubled debt analysis; · Estimation of income for excise tax purposes; · Swap analysis; · Inflation adjustments; · §1256 adjustments; · Market discount analysis; OID adjustments; · CPDI analysis; · Shareholder tax reporting information (e.g. FTC, UGG income, foreign source income by country, exempt income by state);  Provide data, and reports based on such data, maintained by BNY Mellon on its fund accounting platform as reasonably requested by TRP to support TRP’s obligations to comply with requests from tax authorities and TRP’s tax reporting and tax filing obligations.  Assist with other tax-related data needs as mutually agreed upon in writing from time-to-time.

  • Repairs and Maintenance The Tenant shall (a) take good care of the Apartment and all equipment and fixtures in it; (b) promptly make all necessary repairs and replacements whenever the need results from the Tenant's act of neglect or the neglect of Tenant’s family members, guests, visitors or contractors (if consented to by Landlord); (c) keep the Apartment and any other part of the building used by the Tenant as clean and safe as possible; and (d) promptly notify the Landlord when there are conditions which need repair. Landlord shall have a reasonable amount of time to make repairs. Tenant shall be responsible for reimbursing the Landlord for the cost of any repairs that are not "normal wear and tear" repairs, any such costs shall be considered additional rent; (e) shall not attach to, hang from or place anything on the railings of the patio or deck; and ( f ) Tenant agrees not to install any partition walls. No outside contractor is authorized to perform any services at the Apartment or apartment complex unless approved in writing by a representative of the Landlord. If Tenant contracts for any such services without written consent of the Landlord, Tenant shall be wholly responsible for the payment for any such service and shall hold the Landlord harmless against any claim made by a contractor who performs any such service at the request of the Tenant. Tenant shall also be responsible for returning the apartment back to its original condition, or else shall be liable to the Landlord for the costs incurred for the Landlord to do so after Tenant vacates.

Time is Money Join Law Insider Premium to draft better contracts faster.