Unacceptable Work Sample Clauses

Unacceptable Work. If the STATE determines that any document prepared by the CONSULTANT under this Agreement is unacceptable due to errors, omissions or failures to comply with requirements of this Agreement, the CONSULTANT shall correct and revise the unacceptable document in accordance with directions received from the STATE at no cost to the STATE. The corrected and revised document shall be resubmitted for STATE approval. The STATE shall give written notice to the CONSULTANT as soon as practicable after it becomes aware of a negligent error or omission by the CONSULTANT. CONSULTANT shall be liable to the STATE for all damages to the STATE caused by CONSULTANT’s negligent errors and omissions. The CONSULTANT shall reimburse the STATE for the full costs it has incurred as a result of such negligent errors and omissions, including interest and other expenses.
Sample 1Sample 2Sample 3See All (5)
AutoNDA by SimpleDocs
Unacceptable Work. If the DOT, in its sole discretion, deems any of the work under the PAL that the Municipality itself performed or engaged a third party to perform on its behalf, to be unacceptable, then within thirty (30) days from the written demand by the DOT, the Municipality shall promptly return, in whole or in part, to the DOT, the DOT Funding that was disbursed to the Municipality to fund that unacceptable work.
Sample 1Sample 2
Unacceptable Work. If the BOROUGH determines that any document prepared by the CONSULTANT under this Agreement is unacceptable due to errors, omissions or failure to comply with requirements of this Agreement, the CONSULTANT shall promptly correct and revise the unacceptable document in accordance with directions received from the BOROUGH at no cost to the BOROUGH. The corrected and revised document shall be resubmitted for BOROUGH approval. The BOROUGH shall give written notice to the CONSULTANT as soon as practicable after it becomes aware of a negligent error or omission by the CONSULTANT. CONSULTANT shall be liable to the BOROUGH for all damages to the BOROUGH caused by CONSULTANT’s negligent errors and omissions. The CONSULTANT shall reimburse the BOROUGH for the full costs it has incurred as a result of such negligent errors and omissions, including interest and other expenses.
Sample 1
Unacceptable Work. If a supervisor believes a bargaining unit member is doing unacceptable work, the reasons therefore shall be set forth in specific terms, as shall an identification of the specific ways in which the bargaining unit member is to improve, and of the assistance to be given by the Employer towards that improvement. In subsequent observation reports, failure to again note a specific deficiency shall be interpreted to mean that adequate improvement has taken place.
Sample 1
Unacceptable Work. Any work, which does not conform to the requirements of the contract, shall be considered as unacceptable work. Unacceptable work, whether the results of poor workmanship, use of defective materials or damaged through carelessness shall be remedied in a manner acceptable to the Contracting Officer at no cost to the Government. Payment will not be made for unacceptable work.
Sample 1
Unacceptable Work. Unacceptable Work" is Work that does not conform to the requirements of the Contract. Unacceptable Work, resulting from any cause, shall, upon discovery or the knowledge of either the Authority or the Contractor, be immediately removed, replaced, or otherwise remedied by the Contractor in a manner acceptable to the Authority and at the Contractor's sole expense. The fact that the Authority, including its Inspector, may have overlooked Unacceptable Work shall not constitute Acceptance of any part of the Unacceptable Work. If the Contractor fails to promptly comply with any instructions or directives made under this Section 107.5.2, the Authority may cause the Unacceptable Work to be remedied or removed and replaced, and the Authority will deduct these costs from any monies due or to become due the Contractor. When the materials furnished, the Work performed, or the finished product is determined to not conform with the Contract but that reasonably acceptable Work has been performed by the Contractor, the Authority may determine the extent of the Work that will be accepted and remain in place. If so accepted, the Authority may document the basis for Acceptance and an appropriate reduction in the cost of the Work. The Authority will then advise the Contractor of the documentation and price reduction and decrease the cost of the Work. If the Parties are unable to agree on a cost reduction, such Work shall be removed and replaced by the Contractor.
Sample 1
Unacceptable Work. Work not in reasonably close conformance with the contract requirements and ordered to be removed and replaced.
Sample 1
AutoNDA by SimpleDocs
Unacceptable Work. The Contractor, at no additional cost to the contracting Agency, shall correct unacceptable work.
Sample 1

Related to Unacceptable Work

  • Unacceptable Uses The following uses will be regarded as not acceptable:

  • Unacceptable Use The following is considered unacceptable use of the school’s ICT facilities and online platforms by any member of the school community. Any breach of this policy may result in disciplinary or behaviour proceedings (see section 4.2 below). Unacceptable use of the school’s ICT facilities includes: Using the school’s ICT facilities to breach intellectual property rights or copyright Using the school’s ICT facilities to bully or harass someone else, or to promote unlawful discrimination Breaching the school’s policies or procedures Any illegal conduct, or statements which are deemed to be advocating illegal activity Accessing, creating, storing, linking to or sending material that is pornographic, offensive, obscene or otherwise inappropriate Activity which defames or disparages the school, or risks bringing the school into disrepute Sharing confidential information about the school, its pupils, or other members of the school community Connecting any device to the school’s ICT network without approval from authorised personnel Setting up any software, applications or web services on the school’s network without approval by authorised personnel, or creating or using any program, tool or item of software designed to interfere with the functioning of the ICT facilities, accounts or data Gaining, or attempting to gain, access to restricted areas of the network, or to any password-protected information, without approval from authorised personnel Allowing, encouraging, or enabling others to gain (or attempt to gain) unauthorised access to the school’s ICT facilities Causing intentional damage to ICT facilities Removing, deleting or disposing of ICT equipment, systems, programs or information without permission by authorised personnel Causing a data breach by accessing, modifying, or sharing data (including personal data) to which a user is not supposed to have access, or without authorisation Using inappropriate or offensive language Promoting a private business, unless that business is directly related to the school Using websites or mechanisms to bypass the school’s filtering mechanisms This is not an exhaustive list. The school reserves the right to amend this list at any time. The headteacher or other delegated member of SLT will use professional judgement to determine whether any act or behaviour not on the list above is considered unacceptable use of the school’s ICT facilities.

  • Unsafe Work (a) An employee may exercise their right to refuse to do unsafe work pursuant to Section 3.12 of the Occupational Health and Safety Regulations outlined in Information Appendix B.

  • Dirty Work Where an employee and their supervisor agree that work (other than ship repair work) is of an unusually dirty or offensive nature, the employee shall be entitled to 43 cents per hour extra. Where an employee and their supervisor agree that certain ship repair work is of an unusually dirty or offensive nature, the employee shall be entitled to 58 cents per hour extra.

  • Site Work An expansion of the Connecting Transmission Owner’s Boonville Station is required to accommodate the CTOIFs. The southern corner of the fence line will be expanded out by approximately 3,200 square feet. The Connecting Transmission Owner already owns the property required for the expansion. Approximately 120 feet of the existing fencing will need to be removed and approximately 150 feet of new fencing added.

  • Nonconforming Work 23.1.1 Developer shall promptly remove from Premises all Work identified by District as failing to conform to the Contract Documents whether incorporated or not. Developer shall promptly replace and re-execute its own Work to comply with the Contract Documents without additional expense to the District and shall bear the expense of making good all work of other contractors destroyed or damaged by any removal or replacement pursuant hereto and/or any delays to the District or other contractors caused thereby.

  • Punchlist Upon completion of the Performance Tests and prior to Substantial Completion of a Subproject, Owner and Contractor shall inspect the Subproject, and Contractor shall prepare a proposed Punchlist of items identified as needing to be completed or corrected as a result of such inspection. Contractor shall promptly provide the proposed Punchlist to Owner for its review, together with an estimate of the time and cost necessary to complete or correct each Punchlist item. Contractor shall add to the proposed Punchlist any Punchlist items that are identified by Owner within ten (10) Days after Owner’s receipt of the proposed Punchlist from Contractor, and Contractor shall immediately initiate measures to complete or correct, as appropriate, any item on Contractor’s proposed Punchlist (including those items identified by Owner during Owner’s review) that are not of a Punchlist nature. Notwithstanding anything to the contrary in this Agreement, Contractor and Owner are not required as a condition of Substantial Completion of a Subproject to agree upon and identify every Punchlist item and include it on the Punchlist, but Contractor is required to complete as a condition of Substantial Completion of such Subproject that does not meet the definition of Punchlist as provided in Section 1.1. In the event of a dispute regarding whether a specific item of Work meets the definition of Punchlist under Section 1.1, the Parties shall resolve such dispute in accordance with Section 18.1A. Owner shall provide Contractor with access to the Work after Substantial Completion of a Subproject sufficient to enable Contractor to complete all Punchlist items, so long as such access does not unreasonably interfere with operation of a Subproject after Substantial Completion of the Subproject or the Existing Facility and subject to any reasonable security or safety requirements of Owner. Upon Contractor’s completion or correction of any items necessary to achieve Substantial Completion of a Subproject, as modified by any Owner additions, such Punchlist shall govern Contractor’s performance of the Punchlist items up to Final Completion. All Work on the Punchlist shall be completed by the date required for Final Completion, as specified in Section 5.3C, or Owner may, in addition to any other rights that it may have under this Agreement, complete such Punchlist Work at the expense of Contractor. In the event Owner elects to complete such Punchlist Work, Contractor shall pay Owner, within ten (10) Days after receipt of written notice from Owner, all reasonable costs and expenses incurred by Owner in performing such Punchlist Work, or, at Owner’s sole discretion, Owner may withhold or offset amounts owed to Contractor or collect on the Letter of Credit in accordance with Section 7.8 in the amount of such costs and expenses. Any Defective Work identified after agreement between the Parties of the Punchlist shall be corrected by Contractor as a Warranty item under Article 12.

  • Acceptable Uses a. An Authorized Licensee User runs and uses the Model through the AnyLogic Software (i.e. on a computer where the AnyLogic Software is installed) manually, not via any kind of remote interface. This is an acceptable use regardless whether the Model was developed using the same installation of the AnyLogic Software or not, by the same Authorized Licensee User or not, or by the same Licensee or not. In this case, the Authorized Licensee User is also the End User.

  • Unsafe Work Conditions No employee shall be disciplined for refusal to work on an assignment which, in the opinion of:

  • THE WORK The Work comprises the completed construction required by the Contract Documents and includes all labor necessary to produce such construction, and all materials and equipment incorporated or to be incorporated in such construction.

Time is Money Join Law Insider Premium to draft better contracts faster.