Tooling and fixtures Sample Clauses

Tooling and fixtures. 10.1 Company shall own any and all tooling, fixtures, molds, equipment, software and firmware made available to Jabil by Company, developed for or on behalf of Company, or otherwise paid for by Company (“Company Tooling”). Jabil may manufacture, have manufactured, and use the Company Tooling only to perform the Manufacturing Services under the Agreement and shall use and treat the Company Tooling with a high degree of care, and in any case no less than the same degree of care it would for its own equipment, tooling, molds or supplies. Jabil shall attach an identifying label showing Company’s ownership in a conspicuous place on each unit of Company Tooling, if possible, and shall secure and segregate the Company Tooling in such fashion to clearly identify the Company Tooling as the property of Company. Jabil shall maintain the Company Tooling, at its own expense, in efficient working order and good repair based on reasonable wear and use, and otherwise in accordance with Company’s instructions. Jabil shall keep all Company Tooling free of any Encumbrances, and shall not transfer any Company Tooling, or any rights in the Company Tooling to any Person.
AutoNDA by SimpleDocs
Tooling and fixtures iRobot shall own any and all tooling, fixtures, molds, equipment, software and firmware made available to Kin Yat by iRobot, developed for or on behalf of iRobot, or otherwise paid for by iRobot (“iRobot Tooling”). Kin Yat may manufacture, have manufactured, and use the iRobot Tooling only to perform the Manufacturing Services under the Agreement and shall use and treat the iRobot Tooling with a high degree of care, and in any case no less than the same degree of care it would for its own equipment, tooling, molds or supplies. Kin Yat shall attach an identifying label showing iRobot’s ownership in a conspicuous place on each unit of iRobot Tooling, if possible, and shall secure and segregate the iRobot Tooling in such fashion to clearly identify the iRobot Tooling as the property of iRobot. Kin Yat shall maintain the iRobot Tooling, at its own expense, in efficient working order and good repair based on reasonable wear and use, and otherwise in accordance with iRobot’s reasonable instructions. Kin Yat shall keep all iRobot Tooling free of any Encumbrances, and shall not transfer any iRobot Tooling, or any rights in the iRobot Tooling to any Person. Kin Yat shall deliver all iRobot Tooling to iRobot or iRobot’s designee, or at iRobot’s request, make available for pickup, upon the termination or expiration of this Agreement, or upon iRobot’s earlier request. Kin Yat shall execute documents and take such further action as iRobot shall reasonably request to protect iRobot’s interest in the iRobot Tooling. Kin Yat will at the expense of iRobot deliver to iRobot any of the above mentioned tooling within [***] upon iRobot’s written request. Kin Yat will adhere to the record keeping of iRobot Tools in accordance with iRobot requirements set forth in Section 4.10.3 or as otherwise described Schedule 1. Kin Yat shall make such records available for inspection by iRobot or iRobot’s designee Kin Yat upon iRobot’s reasonable request.
Tooling and fixtures. All Spartronics purchased tooling, (hard, soft, and/or electronic) and test fixtures are the property of Spartronics. Tooling and fixtures should not be used for any purpose other than the manufacture of Supplies. Spartronics purchased tooling and fixtures may not be destroyed or transferred without the written permission of Spartronics. All such articles are to be maintained in good working condition and fully covered, with insurance, without expense to Spartronics. Seller will deliver to Spartronics, at Seller’s expense, upon request such articles in good working condition Such articles are to be used for the exclusive production of Spartronics.
Tooling and fixtures. Unless otherwise specified in writing, tooling charges quoted and/or invoiced by TTL represent only a part of the actual cost of same and therefore does not entitle the Buyer to ownership of the tooling or fixtures purchased or made by TTL for the sale of goods to Buyer belonging to TTL, even in cases where some or all of the cost of such tooling or fixtures is paid by Buyer.. TTL agrees to maintain, at its expenses, such tooling in good working condition.
Tooling and fixtures. Unless otherwise specified in writing, tooling charges quoted and/or invoiced by ICI represent only a part of the actual cost of same and therefore does not entitle the Buyer to ownership of the tooling or fixtures purchased or made by ICI for the sale of goods to Buyer belonging to ICI, even in cases where some or all the cost of such tooling or fixtures is paid by Buyer. ICI agrees to maintain, at its expenses, such tooling in good working condition.
Tooling and fixtures. All tooling and fixtures which are designed and built using funds provided by Helix will be the exclusive property of CMI. Upon completion of the Program and commencement of production of components for Helix, CMI will deliver to Helix, free of charge, the two wear testers used in the development process.
Tooling and fixtures 
AutoNDA by SimpleDocs

Related to Tooling and fixtures

  • Furniture, Fixtures and Equipment Sublessee shall have the right to use during the Term the office furnishings and equipment within the Subleased Premises that are identified on Exhibit C attached hereto, as such exhibit may be adjusted by mutual agreement of the parties prior to the Third Floor Premises Delivery Date (the “Furniture”), provided Sublessee may only use the Furniture located in the Second Floor Premises after the Second Floor Commencement Date. The Furniture is provided in its “AS IS, WHERE IS” condition, without representation or warranty whatsoever. Sublessee shall insure the Furniture under the property insurance policy required under the Master Lease, as incorporated herein, and pay all taxes with respect to the Furniture. Sublessee shall maintain the Furniture in good condition and repair, reasonable wear and tear excepted, and shall be responsible for any loss or damage to the same occurring during the Term. Sublessee shall surrender the Furniture to Sublessor upon the termination of this Sublease in the same condition as exists as of the applicable Delivery Date, reasonable wear and tear excepted. Sublessee shall not remove any of the Furniture from the Subleased Premises. Notwithstanding anything to the contrary herein, Sublessee may provide Sublessor with written notice one (1) time not less than forty-five (45) days prior to the Third Floor Premises Delivery Date that lists any items of Furniture that Sublessee does not want to use and Sublessor shall, at no cost to Sublessee, remove such items from the Subleased Premises prior to the Third Floor Premises Delivery Date and such items shall no longer be considered Furniture hereunder. Notwithstanding the foregoing, provided Sublessee is not in default beyond the expiration of any applicable cure or grace period as of the date of the expiration or earlier termination of this Sublease, which condition may be waived by Sublessor in its sole discretion, then upon the expiration or earlier termination of this Sublease, the Furniture shall become the property of Sublessee, and Sublessee shall accept the same in its “AS IS, WHERE IS” condition, without representation or warranty whatsoever except as provided in the Bill of Sale referred to in the following sentence. In the event the Furniture is to become the property of Sublessee upon the expiration or earlier termination of this Sublease pursuant to the terms of the immediately preceding sentence, then Sublessor agrees to execute and deliver to Sublessee a Bill of Sale in the form of Exhibit D attached hereto conveying and transferring to Sublessee the Furniture.

  • Furnishings The Premises is: (check one) ☐ - To be furnished with the following items: [ENTER FURNISHINGS] ☐ - Not furnished.

  • Furniture Sub-Sublandlord represents and warrants that all furniture and equipment listed and described in Schedule “B” attached hereto is within the Sub-Subleased Premises (such equipment and furniture is hereinafter collectively referred to as the “Existing Furniture”). The Sub-Sublandlord warrants that the Existing Furniture is free of any financial lien or hypothec and that there are no service contracts affecting the Existing Furniture. The parties acknowledge and agree that, upon the execution and delivery of this Sub-Sublease, without the requirement of any additional consideration, all rights, title and ownership in and to the Existing Furniture shall be conveyed to and vest in Sub-Subtenant and Sub-Subtenant shall be free to maintain and/or dispose the Existing Furniture as Sub-Subtenant so elects in its sole discretion but subject to the terms hereof. The foregoing conveyance with respect to the Existing Furniture shall be self-executing and no additional documentation shall be required in order to evidence the aforementioned assignment and conveyance of the Existing Furniture to Sub-Subtenant. Sub-Sublandlord makes no representation or warranty as to the condition, fitness or suitability of such Existing Furniture for Sub-Subtenant’s purposes. Sub-Subtenant may, as it deems appropriate or necessary, reconfigure the Existing Furniture to combine with any of Sub-Subtenant’s furniture and equipment. Sub-Sublandlord shall have no obligation for the maintenance, repair or replacement of any such Existing Furniture.

  • Title to Equipment Title shall vest in the Contractor to all equipment purchased hereunder.

  • Removal of Fixtures If Tenant is not in default hereunder, Tenant may, prior to the expiration of the Term of this Lease, or any extension thereof, remove any trade fixtures and equipment which it has placed in the Premises which can be removed without significant damage to the Premises, provided Tenant repairs all damages to the Premises caused by such removal.

  • Machinery and Equipment Except for items disposed of in the ordinary course of business, all machinery, tools, furniture, fixtures, equipment, vehicles, leasehold improvements and all other tangible personal property (hereinafter “Fixed Assets”) of the Company currently being used in the conduct of its business, or included in determining the net book value of the Company on the Balance Sheet Date, together with any machinery or equipment that is leased or operated by the Company, are in fully serviceable working condition and repair. Said Fixed Assets shall be maintained in such condition from the date hereof through the Closing Date. Except as described on Schedule 4.14 hereto, all Fixed Assets owned, used or held by the Company are situated at its business premises and are currently used in its business. Schedule 4.14 describes all Fixed Assets owned by or an interest in which is claimed by any other person (whether a customer, supplier or other person) for which the Company is responsible (copies of all agreements relating thereto being attached to said Schedule 4.14), and all such property is in the Company’s actual possession and is in such condition that upon the return of such property in its present condition to its owner, the Company will not be liable in any amount to such owner. There are no outstanding requirements or recommendations by any insurance company that has issued a policy covering either (i) such Fixed Assets or (ii) any liabilities of the Company relating to operation of the Business, or by any board of fire underwriters or other body exercising similar functions, requiring or recommending any repairs or work to be done on any Fixed Assets or any changes in the operations of the Business, any equipment or machinery used therein, or any procedures relating to such operations, equipment or machinery. All Fixed Assets of the Company are set forth on Schedule 4.14 hereto.

  • Machinery Business machines and mechanical equipment belonging to Tenant which cause noise and/or vibration that may be transmitted to the structure of the Building or to any other leased space to such a degree as to be objectionable to Landlord or to any tenants in the Complex shall be placed and maintained by the party possessing the machines or equipment, at such party’s expense, in settings of cork, rubber or spring type noise and/or vibration eliminators, and Tenant shall take such other measures as needed to eliminate vibration and/or noise. If the noise or vibrations cannot be eliminated, Tenant must remove such equipment within ten (10) days following written notice from Landlord.

  • Fixtures All Equipment now owned, or the ownership of which is hereafter acquired, by Borrower which is so related to the Land and Improvements forming part of the Property that it is deemed fixtures or real property under the law of the particular state in which the Equipment is located, including, without limitation, all building or construction materials intended for construction, reconstruction, alteration or repair of or installation on the Property, construction equipment, appliances, machinery, plant equipment, fittings, apparatuses, fixtures and other items now or hereafter attached to, installed in or used in connection with (temporarily or permanently) any of the Improvements or the Land, including, but not limited to, engines, devices for the operation of pumps, pipes, plumbing, cleaning, call and sprinkler systems, fire extinguishing apparatuses and equipment, heating, ventilating, plumbing, laundry, incinerating, electrical, air conditioning and air cooling equipment and systems, gas and electric machinery, appurtenances and equipment, pollution control equipment, security systems, disposals, dishwashers, refrigerators and ranges, recreational equipment and facilities of all kinds, and water, gas, electrical, storm and sanitary sewer facilities, utility lines and equipment (whether owned individually or jointly with others, and, if owned jointly, to the extent of Borrower's interest therein) and all other utilities whether or not situated in easements, all water tanks, water supply, water power sites, fuel stations, fuel tanks, fuel supply, and all other structures, together with all accessions, appurtenances, additions, replacements, betterments and substitutions for any of the foregoing and the proceeds thereof (collectively, the "FIXTURES"). Notwithstanding the foregoing, "Fixtures" shall not include any property which tenants are entitled to remove pursuant to leases except to the extent that Borrower shall have any right or interest therein;

  • Property and Equipment All property and equipment purchased by CONTRACTOR with funds received under this Agreement, or purchased on behalf of CONTRACTOR for the program site(s) covered under this Agreement, shall be insured by CONTRACTOR at replacement value against fire, theft, and destruction equal to the full replacement cost.

  • Fixtures and Equipment Each of the Company and its Subsidiaries (as applicable) has good title to, or a valid leasehold interest in, the tangible personal property, equipment, improvements, fixtures, and other personal property and appurtenances that are used by the Company or its Subsidiary in connection with the conduct of its business (the “Fixtures and Equipment”). The Fixtures and Equipment are structurally sound, are in good operating condition and repair, are adequate for the uses to which they are being put, are not in need of maintenance or repairs except for ordinary, routine maintenance and repairs and are sufficient for the conduct of the Company’s and/or its Subsidiaries’ businesses (as applicable) in the manner as conducted prior to the Closing. Each of the Company and its Subsidiaries owns all of its Fixtures and Equipment free and clear of all Liens except for (a) liens for current taxes not yet due and (b) zoning laws and other land use restrictions that do not impair the present or anticipated use of the property subject thereto.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!