The Interconnection Agreement Sample Clauses

The Interconnection Agreement. The purpose of the Interconnection Agreement is to allow the interconnection of GMP’s Small Generating Facility to the Administered Transmission System at GMP’s Xxxxxxx Substation. The Small Generating Facility is an existing 5-unit hydroelectric facility located in Proctor, Vermont, constructed in 1904-1905, expanded in 1984, and continuously owned by, and interconnected to, GMP or its predecessors in interest. Pursuant to GMP’s Interconnection Request dated March 3, 2015, GMP proposed to and has upgraded four of the five existing units comprising the Small Generating Facility to achieve a gross rating of 9.841 megawatts in Summer and Winter. A detailed description of the various elements comprising the Small Generating Facility is included in Attachment 2 of the Interconnection Agreement. Consistent with Order No. 2006 and Schedule 23 of the ISO OATT, the new Interconnection Request triggered the need for a new pro forma SGIA. Accordingly, the Filing Parties entered into the Interconnection Agreement. The Interconnection Agreement will govern the entire Small Generating Facility’s interconnection to the Administered Transmission System.
AutoNDA by SimpleDocs
The Interconnection Agreement. The purpose of the Interconnection Agreement is to allow the interconnection of XXXX’x Xxxxxx X. Xxxxxx Generating Station (the “Large Generating Facility”) to the Administered Transmission System at the existing 115 kV ring bus in XXXX’x Station 16 switchyard (the Potter Switchyard).10 As detailed in Appendix C to the Interconnection Agreement, the Large Generating Facility, rated at 182 megawatts (“MW”) gross and 180.5 MW net, will be comprised of three simple cycle combustion turbine units located at Potter Road in Braintree, Massachusetts. Two of the simple cycle combustion turbine units (“Xxxxxx Units 1 and 2”) that are each rated at 58 XX xxxxx are existing facilities that were interconnected pursuant to the 2008 Interconnection Agreement that was filed with the Commission on October 1, 2008, in Docket Nos. ER09-19- 000, et al. The existing Xxxxxx Units 1 and 2 of the Large Generating Facility currently have Capacity Network Resource Interconnection Service for 105.2 MW Summer and 114.8 XX Xxxxxx. Pursuant to an Interconnection Request dated February 24, 2014, BELD will be increasing the output of the existing facility by adding a new simple cycle combustion turbine unit rated at 66 XX xxxxx (“Xxxxxx Unit 3”). Xxxxxx Unit 3 will be interconnecting to the Administered Transmission System at XXXX’x Xxxxxx Switchyard via existing Interconnection Facilities that are currently being used by XXXX’x Xxxxxx 2 Large Generating Facility (not subject to the Interconnection Agreement), which BELD will be retiring pursuant to all of the applicable provisions/processes set out in the ISO Tariff in time to allow for the connection of new Xxxxxx Unit 3. By governing the interconnection of the entire Large Generating Facility, comprising of the existing Xxxxxx Units 1 and 2 and the new Xxxxxx Unit 3, the Interconnection Agreement supplants the existing 2008 Interconnection Agreement. For this reason, the ISO and BELD have agreed to terminate the 2008 Interconnection Agreement and provide notice of that termination in this filing.
The Interconnection Agreement. The purpose of the Interconnection Agreement is to allow the interconnection of GMP’s Small Generating Facility to the Administered Transmission System at GMP’s Huntington Falls Substation. The Small Generating Facility is an existing facility that was constructed in 1910 and has been interconnected to the Interconnecting Transmission Owner’s system prior to its acquisition.6 The existing Small Generating Facility is located in Weybridge, VT and is currently comprised of three existing hydroelectric generators: unit 1 is 800 kVA; unit 2 is 1,000 kVA; and unit 3 is 4,500 kVA. Pursuant to GMP’s Interconnection Request dated April 21, 2016, GMP proposed to replace units 1 and 2 of the Small Generating Facility. After the addition of the two new units, the Small Generating Facility will consist of two new 1,378 kVA hydro generators (units 1 and 2) and an existing 4,555 kVA hydro generator (unit 3). The modifications to the Small Generating Facility are being made to achieve a rating of 6.58 XX xxxxx and net for Summer and Winter. A detailed description of the various elements comprising the Small Generating Facility is included in Attachment 2 of the Interconnection Agreement. Consistent with Order No. 2006 and Schedule 23 of the ISO OATT, the new Interconnection Request triggered the need for a new pro forma SGIA. Accordingly, the Filing Parties entered into the Interconnection Agreement. The Interconnection Agreement will govern the entire Small Generating Facility’s interconnection to the Administered Transmission System.
The Interconnection Agreement. 6.2 In the event of conflict or ambiguity between the provisions of the Interconnection Agreement (including any attachments) and the published RIO, and subject to Clause 6.1 the following order of precedence shall apply:
The Interconnection Agreement. The parties have entered into the Interconnection Agreement to establish the terms and conditions governing the interconnection of ATSI’s transmission system and MAIT’s transmission system and to define the continuing responsibilities and obligations of the parties with respect thereto. The two systems are interconnected at one point: the Ashtabula – Erie West Interconnection Point located near the Ohio and Pennsylvania state border at ATSI structure 13083. The parties may amend the agreement pursuant to Section 10.3 to add, discontinue or modify interconnection points. The agreement does not impose any charge for the mutual interconnection service provided thereunder, although Section 6.1 contemplates that the parties may need to invoice each other in connection with: (a) the establishment of a new interconnection point; (b) the modification of an existing interconnection point; or (c) other purposes specified in the agreement. Pursuant to Commission precedent, PJM is a signatory to the agreement for the limited purpose of ensuring that PJM is kept fully apprised of the matters addressed herein and so that PJM may be kept aware of any reliability and planning issues that may arise.4 The Interconnection Agreement has been designated as Service Agreement No. 4576 under the PJM Open Access Transmission Tariff (“PJM Tariff”).

Related to The Interconnection Agreement

  • Interconnection Agreement On or before December 31, 2015, Wholesale Market Participant must enter into an Interconnection Agreement with the Transmission Owner in order to effectuate the WMPA. Wholesale Market Participant shall demonstrate the occurrence of each of the foregoing milestones to Transmission Provider’s reasonable satisfaction. Transmission Provider may reasonably extend any such milestone dates, in the event of delays that Wholesale Market Participant (i) did not cause and (ii) could not have remedied through the exercise of due diligence. If (i) the Wholesale Market Participant suspends work pursuant to a suspension provision contained in an interconnection and/or construction agreement with the Transmission Owner or (ii) the Transmission Owner extends the date by which Wholesale Market Participant must enter into an interconnection agreement relative to this WMPA, and (iii) the Wholesale Market Participant has not made a wholesale sale under this WMPA, the Wholesale Market Participant may suspend this WMPA by notifying the Transmission Provider and the Transmission Owner in writing that it wishes to suspend this WMPA, with the condition that, notwithstanding such suspension, the Transmission System shall be left in a safe and reliable condition in accordance with Good Utility Practice and Transmission Provider’s safety and reliability criteria. Wholesale Market Participant’s notice of suspension shall include an estimated duration of the suspension period and other information related to the suspension. Pursuant to this section 3.1, Wholesale Market Participant may request one or more suspensions of work under this WMPA for a cumulative period of up to a maximum of three years. If, however, the suspension will result in a Material Modification as defined in Part I, Section 1.18A.02 of the Tariff, then such suspension period shall be no greater than one (1) year. If the Wholesale Market Participant suspends this WMPA pursuant to this Section 3.1 and has not provided written notice that it will exit such suspension on or before the expiration of the suspension period described herein, this WMPA shall be deemed terminated as of the end of such suspension period. The suspension time shall begin on the date the suspension is requested or on the date of the Wholesale Market Participant’s written notice of suspension to Transmission Provider, if no effective date was specified. All milestone dates stated in this Section 3.1 shall be deemed to be extended coextensively with any suspension period permitted pursuant to this provision.

  • Interconnection Customer’s Interconnection Facilities Construction The Interconnection Customer’s Interconnection Facilities shall be designed and constructed in accordance with Good Utility Practice. Within one hundred twenty (120) Calendar Days after the Commercial Operation Date, unless the Participating TO and Interconnection Customer agree on another mutually acceptable deadline, the Interconnection Customer shall deliver to the Participating TO and CAISO “as-built” drawings, information and documents for the Interconnection Customer’s Interconnection Facilities and the Electric Generating Unit(s), such as: a one-line diagram, a site plan showing the Large Generating Facility and the Interconnection Customer’s Interconnection Facilities, plan and elevation drawings showing the layout of the Interconnection Customer’s Interconnection Facilities, a relay functional diagram, relaying AC and DC schematic wiring diagrams and relay settings for all facilities associated with the Interconnection Customer's step-up transformers, the facilities connecting the Large Generating Facility to the step-up transformers and the Interconnection Customer’s Interconnection Facilities, and the impedances (determined by factory tests) for the associated step-up transformers and the Electric Generating Units. The Interconnection Customer shall provide the Participating TO and the CAISO specifications for the excitation system, automatic voltage regulator, Large Generating Facility control and protection settings, transformer tap settings, and communications, if applicable. Any deviations from the relay settings, machine specifications, and other specifications originally submitted by the Interconnection Customer shall be assessed by the Participating TO and the CAISO pursuant to the appropriate provisions of this LGIA and the LGIP.

  • Interconnection 2.1.10 Startup Testing and Commissioning

  • Connecting Transmission Owner’s Attachment Facilities Construction The Connecting Transmission Owner’s Attachment Facilities shall be designed and constructed in accordance with Good Utility Practice. Upon request, within one hundred twenty (120) Calendar Days after the Commercial Operation Date, unless the Connecting Transmission Owner and Developer agree on another mutually acceptable deadline, the Connecting Transmission Owner shall deliver to the Developer “as-built” drawings, relay diagrams, information and documents for the Connecting Transmission Owner’s Attachment Facilities set forth in Appendix A. The Connecting Transmission Owner [shall/shall not] transfer operational control of the Connecting Transmission Owner’s Attachment Facilities and Stand Alone System Upgrade Facilities to the NYISO upon completion of such facilities.

  • Network Interconnection 26.1 Interconnection between the networks of different SERVICE PROVIDERs shall be as per National Standards of CCS No.7 issued from time to time by Telecom Engineering Centre (TEC) and also subject to technical feasibility and technical integrity of the Networks and shall be within the overall framework of interconnection regulations issued by the TRAI from time to time. However, if situation so arises, INTERCONNECTION with R2MF signaling may be permitted by LICENSOR.

  • Participating TO's Interconnection Facilities Construction The Participating TO's Interconnection Facilities shall be designed and constructed in accordance with Good Utility Practice. Upon request, within one hundred twenty (120) Calendar Days after the Commercial Operation Date, unless the Participating TO and Interconnection Customer agree on another mutually acceptable deadline, the Participating TO shall deliver to the Interconnection Customer and the CAISO the following “as-built” drawings, information and documents for the Participating TO's Interconnection Facilities [include appropriate drawings and relay diagrams]. The Participating TO will obtain control for operating and maintenance purposes of the Participating TO's Interconnection Facilities and Stand Alone Network Upgrades upon completion of such facilities. Pursuant to Article 5.2, the CAISO will obtain Operational Control of the Stand Alone Network Upgrades prior to the Commercial Operation Date.

  • Energy Resource Interconnection Service (ER Interconnection Service).

  • SS7 Network Interconnection 9.7.1 SS7 Network Interconnection is the interconnection of Global Connection local signaling transfer point switches or Global Connection local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Global Connection local or tandem switching systems, and other third-party switching systems directly connected to the XxxxXxxxx XX0 network.

  • Connecting Transmission Owner’s Attachment Facilities Connecting Transmission Owner shall design, procure, construct, install, own and/or control the Connecting Transmission Owner’s Attachment Facilities described in Appendix A hereto, at the sole expense of the Developer.

  • Interconnection Customer’s Interconnection Facilities The Interconnection Customer shall design, procure, construct, install, own and/or control the Interconnection Customer’s Interconnection Facilities described in Appendix A at its sole expense.

Time is Money Join Law Insider Premium to draft better contracts faster.