The Builder Sample Clauses

The Builder. (i) shall be liable to the Buyer for any damage to or loss of any Buyer’s Supplies occurring or arising after their delivery by (or on behalf of) the Buyer under Clause 6.1 unless such damage or loss is caused by the inadequate packing or inherent vice of such Buyer’s Supplies; and
Sample 1Sample 2Sample 3See All (14)
AutoNDA by SimpleDocs
The Builder. Any of the events specified in Clauses 11.1.5 to 11.1.12 of this Clause shall occur in respect of the Builder at any time prior to the Delivery Date.
Sample 1Sample 2Sample 3See All (12)
The Builder. (i) acknowledges that the Buyer intends to arrange for the Ship’s maiden cruise with fare paying passengers to be held on the Ship’s relocation voyage from the Delivery Port; (ii) acknowledges that it is imperative for the Ship to be ready at the time, and in the condition, provided for in this Contract so as to enable the Buyer to fulfil its commitments in relation to the Ship’s maiden cruise; (iii) agrees to do all it can to assist the Buyer to fulfil its commitments in relation to the Ship’s maiden cruise; and (iv) acknowledges that if delivery of the Ship is not made on the Delivery Date, the Buyer will suffer loss and damage (including reputational damage) in amounts which are extremely difficult to quantify in advance and agrees that the per day sums set out in Clause 2.15 represent a genuine and reasonable pre-estimate of the Buyer’s loss and damage for each day of delay in delivery of the Ship beyond the Delivery Date.
Sample 1Sample 2Sample 3See All (8)
The Builder. Any of the events specified in Clauses 11.1.5 to 11.1.12 of this Clause shall occur in respect of the Builder at any time prior to the Redelivery Date.
Sample 1Sample 2Sample 3See All (6)
The Builder. The third option of the main screen (see Figure 5) provides the user with the possibility to build her own app from scratch or using basic templates. The app builder allows teachers to create new apps to fit their needs without advanced programming or the help of an external programmer. The builder will enable Figure 11: The second step to adapt an app – create the configuration of the app. Figure 12: The alternative view of the second step to adapt an app – pre- view the adapted app. Figure 13: The third step to adapt an app – save the adapted app. Figure 14: The advanced view editor of the app composer. teachers to create missing apps to support their learning scenarios. Most likely, the builder module of the app composer will only be used by a fraction of the teachers since creating an app from scratch will always be a rather complex process. There is a tradeoff: by making systems very simple, the system often becomes less powerful. If we want to create a general app builder, then it will probably require an investment of the teachers to learn how to operate this tool. Furthermore, approaches for non-programmers to adding advanced logic to apps, such as graphical programming, exist, but also often have a learning curve. Therefore, we regard the builder module as a tool for advanced, expert teachers. Due to the large scope of the builder module we will only discuss two mockups here. Figure 14 illustrates the ‘View’ module of the builder, which allows the user to draw and configure the user interface. In the center of the screen the app’s UI is shown. Such a UI can be assembled by dragging and dropping different components available in the panel on the left side. The column with icons next to the left panel provides some basic functionality to load and save your app and manipulate the graphical components of the app’s UI. On the right-side panel, one can set different properties of the component that is selected in the center part. In Figure 14, the user has selected the formula editor and has configured for instance its size to 100x20px. Application logic can be added to the UI components composed in the view module. One can configure this in the ‘Logic’ module, which is accessible through the tabs on top of the left-side panel. This logic module allows: (i) to define variables that can be used in the logic and view, (ii) to model progress and animations, (iii) to program the logic using the defined variables and (iv) to describe events and their effect....
Sample 1

Related to The Builder

  • Lessor The Lessor designated on this Lease and its respective successors and assigns. Lessor Indemnified Party: Lessor, any Affiliate of Lessor, including the Company, any other Person against whom any claim for indemnification may be asserted hereunder as a result of a direct or indirect ownership interest in Lessor, the officers, trustees, directors, stockholders, partners, members, employees, agents and representatives of any of the foregoing Persons and of any stockholder, partner, member, agent, or representative of any of the foregoing Persons, and the respective heirs, personal representatives, successors and assigns of any such officer, trustee, director, partner, member, stockholder, employee, agent or representative.

  • Lessee The related Lessee is a Person other than MBFS USA, any Affiliate thereof or a Governmental Authority and, at the time of origination of the 201[__]-[__] Lease, based on information provided by the Lessee, the Lessee is located in and has a billing address within a State.

  • LANDLORD The covenants and obligations contained in this Lease on the part of Landlord are binding on Landlord, its successors, and assigns only during their respective period of ownership of an interest in the Building. In the event of any transfer or transfers of such title to the Building, Landlord (and, in the case of any subsequent transfers or conveyances, the then grantor) shall be concurrently freed and relieved from and after the date of such transfer or conveyance, without any further instrument or agreement, of all liability with respect to the performance of any covenants or obligations on the part of Landlord contained in this Lease thereafter to be performed.

  • Tenant The complete name of every Tenant who will enter this lease with the intention of renting the Landlord’s property as a month-to-month rental is a necessary part of this document’s introduction. (3)

  • The Premises Landlord hereby leases to Tenant and Tenant hereby leases from Landlord the premises set forth in Section 2.2 of the Summary (the “Premises”). The outline of the Premises is set forth in Exhibit A attached hereto, and an outline of the Project is set forth in Exhibit A-1 attached hereto. The parties hereto agree that the lease of the Premises is upon and subject to the terms, covenants and conditions herein set forth, and Tenant covenants as a material part of the consideration for this Lease to keep and perform each and all of such terms, covenants and conditions by it to be kept and performed and that this Lease is made upon the condition of such performance. The parties hereto hereby acknowledge that the purpose of Exhibit A is to show the approximate location of the Premises in the “Building,” as that term is defined in Section 1.1.2, below, only, and such Exhibit is not meant to constitute an agreement, representation or warranty as to the construction of the Premises, the precise area thereof or the specific location of the “Common Areas,” as that term is defined in Section 1.1.3, below, or the elements thereof or of the accessways to the Premises or the “Project,” as that term is defined in Section 1.1.2, below. Except as specifically set forth in this Lease, Tenant shall accept the Premises in its presently existing “as-is” condition and Landlord shall not be obligated to provide or pay for any improvement work or services related to the improvement of the Premises. Tenant also acknowledges that neither Landlord nor any agent of Landlord has made any representation or warranty regarding the condition of the Premises, the Building or the Project or with respect to the suitability of any of the foregoing for the conduct of Tenant’s business, except as specifically set forth in this Lease. However, notwithstanding the foregoing, Landlord agrees that base Building electrical, mechanical, heating, ventilation and air conditioning and plumbing systems located in the Premises shall be in good working order and the roof shall be water tight as of the date Landlord delivers possession of the Premises to Tenant. Except to the extent caused by the acts or omissions of Tenant or any Tenant Parties (as defined in Section 10.13 below) by any alterations or improvements performed by or on behalf of Tenant, if such systems and/or the roof are not in good working order as of the date possession of the Premises is delivered to Tenant and Tenant provides Landlord with notice of the same within ninety (90) days following the date Landlord delivers possession of the Premises to Tenant, Landlord shall be responsible for repairing or restoring the same at Landlord’s sole cost and expense. Subject to any repairs or restoration required by the immediately preceding sentence, the commencement of business operations from the Premises by Tenant shall presumptively establish that the Premises and the Building were at such time in good and sanitary order, condition and repair. For purposes of Section 1938 of the California Civil Code, Landlord hereby discloses to Tenant, and Tenant hereby acknowledges, that the Premises, the Building and the Project have not undergone inspection by a Certified Access Specialist (CASp).

  • Contractor If COUNTY elects to renegotiate this Agreement due to reduced or terminated 20 funding, CONTRACTOR shall not be obligated to accept the renegotiated terms.

  • Demised Premises The Landlord hereby demises and leases to the Tenant, and the Tenant hereby leases from the Landlord, upon and subject to the terms and provisions of this Lease (which term is used herein shall include all Exhibits attached hereto or referred to herein), the commercial space (sometimes hereinafter referred to as the "Demised Premises") depicted on Exhibit A hereto annexed and made a part hereof. Said Demised Premises contain approximately six thousand six hundred fifty-one (6,651) square feet of floor area (measuring from (i) the center of the two side demising walls and (ii) the front lease line of the Demised Premises, through the rear wall), commonly known as suite 3800 on level 3 as shown on Exhibit A-1 attached hereto of the multi-level structure (the "Mall Building"), which Landlord has constructed on a parcel of land (the "Shopping Center Site") located in Dallas, Dallas County, Texas. The metes and bounds description of the Shopping Center Site is set forth on Exhibit A-2 annexed hereto and made a part hereof. In the event, within sixty (60) days after commencement of the term of this Lease, either party hereto finds that the actual floor area of the Demised Premises differs by ten (10) square feet or more from the floor area set forth hereinabove and such difference is confirmed by Landlord's independent architect (which confirmation shall be binding upon Landlord and Tenant absent bad faith or manifest error on the part of Landlord's architect), Landlord and Tenant shall execute an amendment to this Lease setting forth the actual floor area, and proportionately changing Tenant's monetary obligations, including Minimum Rent, based upon the ratio of the actual floor area of the Demised Premises to the floor area set forth hereinabove. The term "

  • Leased Premises Lessor hereby leases to Lessee, and Lessee leases and takes from Lessor, the Leased Premises subject to the conditions of this Lease.

  • Lessee's Improvements Since Lessor is the Insuring Party, Lessor shall not be required to insure Lessee-Owned Alterations and Utility Installations unless the item in question has become the property of Lessor under the terms of this Lease.

  • The Site The site of the Project Highway (the “Site”) shall comprise the site described in Schedule-A in respect of which the Right of Way shall be provided by the Authority to the Contractor. The Authority shall be responsible for:

Time is Money Join Law Insider Premium to draft better contracts faster.