Tests of Metering Installations Sample Clauses

Tests of Metering Installations. (a) Each Party shall, at its expense, test its metering components associated with this Agreement as provided by the Electricity and Gas Inspection Act (Canada) and field test the metering installation at least once every two years. If requested to do so, each Party shall make additional tests or inspections of such installations, the expense of which shall be paid by such other requesting Party unless such additional tests or inspections show the measurements of such installations to be registering outside the prescribed limit of error. Each Party shall give reasonable notice of the time when any such test or inspection is to be made to the other Party, who may have representatives present at such test or inspection. Any component of such installations found to be defective or inaccurate shall be adjusted, repaired, or replaced to provide accurate metering.
AutoNDA by SimpleDocs
Tests of Metering Installations. Each party to this contract shall, at its expense, test its metering installations associated with this contract at least once every two years, and, if requested to do so by the other party, shall make additional tests or inspections of such installations, the expense of which shall be paid by such other party unless such additional tests or inspections show the measurements of such installations to be inaccurate as specified in section 7. Each party shall give reasonable notice of the time when any such test or inspection is to be made to the other party who may have representatives present at such test or inspection. Any component of such installations found to be defective or inaccurate shall be adjusted, repaired or replaced to provide accurate metering.
Tests of Metering Installations. Each Party shall, at its expense, test its measuring installations associated with this Agreement, a service agreement under the Tariff providing for the delivery of electric power to the Point(s) of Delivery, or any other agreement between the Parties, in accordance with the Meter Reading and Meter Test Procedures outlined in Exhibit B. The Parties may mutually agree to use a single set of meters. In the event that a single set of meters are utilized, tests of such meters shall be conducted jointly by the Parties in accordance with Exhibit B and shall be witnessed and agreed to by representatives of each Party.

Related to Tests of Metering Installations

  • Lending Installations Each Lender may book its Loans at any Lending Installation selected by such Lender and may change its Lending Installation from time to time. All terms of this Agreement shall apply to any such Lending Installation and the Loans and any Notes issued hereunder shall be deemed held by each Lender for the benefit of any such Lending Installation. Each Lender may, by written notice to the Agent and the Borrower in accordance with Article XIII, designate replacement or additional Lending Installations through which Loans will be made by it and for whose account Loan payments are to be made.

  • Metering The Interconnection Customer shall be responsible for the Connecting Transmission Owner’s reasonable and necessary cost for the purchase, installation, operation, maintenance, testing, repair, and replacement of metering and data acquisition equipment specified in Attachments 2 and 3 of this Agreement. The Interconnection Customer’s metering (and data acquisition, as required) equipment shall conform to applicable industry rules and Operating Requirements.

  • Cost of Metering The Issuer shall not be obligated to pay any costs associated with the routine metering duties set forth in this Section 2, including the costs of installing, replacing and maintaining meters, nor shall the Issuer be entitled to any credit against the Servicing Fee for any cost savings realized by the Servicer as a result of new metering and/or billing technologies.

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the product in the required locations at no additional charge, unless otherwise designated on the Contract or purchase order. Contractor’s authorized product and price list shall clearly and separately identify any additional installation charges. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the product or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the product in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations 7.1 Lessee's Obligations.

  • Maintenance Repairs and Alterations Landlord hereby covenants that the Premises shall be in reasonably good and usable condition as of the effective date of this Agreement. Replacements made by Landlord, if any, shall belong to it. Landlord shall keep access to the Premises free and clear of any and all obstructions including snow and ice. ** Portions of this agreement have been omitted and filed separately with the SEC pursuant to a confidential treatment request CONFIDENTIAL EXECUTION VERSION In the event of an emergency, Tenant shall have the right to perform any obligation of Landlord under this Agreement and recover from Landlord any reasonable amounts so expended by Tenant within thirty (30) days of the date of demand or, in the alternative, to offset amounts so expended against Rent. Landlord shall, at its sole expense, make structural repairs and replacements to the footings, foundation and structural elements of walls and roofs of the Premises and also shall be responsible for maintenance, repairs and replacements, at its sole expense, of heating, ventilating, air conditioning systems, plumbing systems, and electrical systems, provided, however, that Tenant, at its sole expense, shall be responsible for maintenance, repairs and replacements regarding the irrigation system on the Premises as well as Tenant's occupancy costs as described above in Section 4 of this Agreement and shall also be responsible for maintenance, repairs or replacements necessitated by Tenant's actions. Contact information for the Landlord in case of any maintenance, repair or replacement issues is as follows: [**]1 Additions, improvements and alterations made by Tenant, whether temporary or permanent in nature, shall be subject to the prior approval of Landlord and upon completion shall belong to Tenant, provided that removal may be made without damage to the Premises at the expiration of the Agreement term. If removal of the improvements or alterations would cause damage to the Premises, said improvements and alterations shall automatically become the property of Landlord. Tenant, at its sole expense, shall be responsible for maintenance, repairs and replacements of any additions, improvements or alterations made by Tenant on, in or to the Premises. Tenant shall keep the Premises in good order, repair and condition at all times during the Agreement term, except for ordinary wear and tear.

  • Installation and Maintenance of Meters The Servicer shall cause to be installed, replaced and maintained meters in accordance with the Servicer Policies and Practices.

  • Alterations Tenant agrees that it will not (a) demolish or undertake any structural alterations of any of the buildings or other improvements erected upon or otherwise comprising the Demised Premises, without the prior written consent of Landlord or (b) make any other alterations which would change the character of the buildings or other improvements comprising the Demised Premises or which would weaken, impair or otherwise in any way affect the structural aspects of integrity of or lessen the value of the Demised Premises and/or the buildings and other improvements comprising the Demised Premises. With respect to any alterations permitted to be made by Tenant pursuant to this Article Ten, Tenant shall (a) pay all costs, expenses and charges thereof, (b) make the same in accordance with all applicable laws and building codes in a good and workmanlike manner, (c) cause the same to be performed by qualified contractors who shall not create any labor or other disturbance at the Demised Premises while performing same, (d) fully and completely indemnify and hold harmless Landlord from and against any mechanic’s liens or other liens or claims in connection with the making thereof and (e) by reason of such alterations, not thereby and (e) by reason of such alterations, not thereby reduce the economic value of the Demised Premises. All alterations, improvements and additions to the Demised Premises permitted to be made by Tenant hereunder, shall be made in accordance with all applicable laws and plans and specifications previously submitted to Landlord for Landlord’s approval, which approval shall not be unreasonably withheld or delayed, and, except for removable trade fixtures, shall at once when made or installed be deemed to have attached to the freehold and to have become the property of Landlord and shall remain for the benefit of Landlord at the end of the term or other expiration of this Lease in as good order and condition as they were when installed, reasonable wear and tear excepted. In the event in the making of such alteration, improvements and additions as herein provided, Tenant further agrees to indemnify and hold harmless Landlord from and against all costs, expenses, liens, claims and damages arising out of, or resulting from the undertaking or making of such alterations, improvements and additions.

  • Utility Installations Trade Fixtures Alterations 8.3.1 The term “Utility Installations” refers to all floor and window coverings, air and/or vacuum lines, power panels, electrical distribution, security and fire protection systems, communication cabling, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term “

  • Tenant’s Equipment Tenant shall provide notice to Landlord prior to moving any heavy machinery, heavy equipment, freight, bulky matter or fixtures (collectively, “Equipment”) into or out of the Building and shall pay to Landlord any costs actually incurred by Landlord in connection therewith. If such Equipment requires special handling, Tenant agrees (a) to employ only persons holding all necessary licenses to perform such work, (b) all work performed in connection therewith shall comply with all applicable Requirements and (c) such work shall be done only during hours designated by Landlord.

Time is Money Join Law Insider Premium to draft better contracts faster.