Temperature range Sample Clauses

Temperature range. 4.4.1. Settled gas temperature Settled temperature of gas in cylinders may vary from a minimum of -40 °C to a maximum of 65 °C;
AutoNDA by SimpleDocs
Temperature range. Temperature of liquid in tanks may vary from a minimum of -195 °C to a maximum of 65 °C.
Temperature range. 20 4.1.1 Base Station Temperature Range.........................................20 4.1.2 Subscriber Equipment Temperature Range.................................20 4.2 HUMIDITY......................................................................20 4.2.1 Outdoor Humidity.......................................................20 4.3 WINDLOADING...................................................................20 39 GXx Xxxxx xx Multipoint Radio Subsystem Specification
Temperature range. The devices will be tested to ensure operational function at temperatures ranging from -20C to +70C.
Temperature range. Concrete Structures: Temperature rise, 20° C (35° F) Temperature fall, 25° C (45° F) Steel Structures: -34° to 49° C (-30° to 120° F) Coefficients of Thermal Expansion (a ) Concrete: 0.0000108 m/m/° C (0.000006 ft/ft/° F) Steel: 0.0000117 m/m/° C (0.0000065 ft/ft/° F)
Temperature range i. For Design of Structure to account for Temperature in formula Movement (DL) = Lt The value of “t” shall be as given in 2.9.5 of Section 6.
Temperature range i. For Design of Structure to account for Temperature in formula Movement (DL) = αLt
AutoNDA by SimpleDocs
Temperature range. 20 4.1.1 Base Station Temperature Range.........................................20 4.1.2 Subscriber Equipment Temperature Range.................................20 [***] CONFIDENTIAL TREATMENT REQUESTED -1- 55 [***] GHz Point to Multipoint Radio Subsystem Specification

Related to Temperature range

  • Temperature Where low temperature and/or self-service cases are used for any of such merchandise coming under the jurisdiction of the Union, such cases shall be served only by employees covered by this Agreement.

  • Delivery Pressure Xxxxxx agrees to use due care and diligence to furnish gas hereunder at such uniform pressure as Seller may elect up to, but not exceeding 20 pounds per square inch gauge, and not less than 5 pounds per square inch gauge, at the "Point of Delivery". Buyer shall be responsible for the installation and operation of adequate safety equipment downstream of the Point of Delivery so as to relieve or control pressure variations within the limits described above that may, for any reason through malfunction of Seller's equipment or otherwise, occur on Buyer's side of the "Delivery Point".

  • Delivery Points ‌ Project water made available to the Agency pursuant to Article 6 shall be delivered to the Agency by the State at the delivery structures established in accordance with Article 10.

  • Speed The relative importance we attach is “high”.

  • Ceiling Company and its subcontractors will not affix, attach, or suspend any lighting fixtures, signs, or other fixtures or devices of any kind or nature from the ceiling above any of the Premises without the prior written approval of Authority.

  • Delivery Point (a) All Energy shall be Delivered hereunder by Seller to Buyer at the Delivery Point. Seller shall be responsible for the costs of delivering its Energy to the Delivery Point consistent with all standards and requirements set forth by the FERC, ISO-NE, the Interconnecting Utility and any other applicable Governmental Entity and any applicable tariff.

  • HEATING The Hirer shall ensure that no unauthorised heating appliances shall be used on the premises when open to the public without the consent of the management committee. Portable Liquefied Propane Gas (LPG) heating appliances shall not be used.

  • Noise The Hirer shall ensure that the minimum of noise is made on arrival and departure, particularly late at night and early in the morning. The Hirer shall, if using sound amplification equipment, make use of any noise limitation device provided at the premises and comply with any other licensing condition for the premises.

  • Metering The Interconnection Customer shall be responsible for the Connecting Transmission Owner’s reasonable and necessary cost for the purchase, installation, operation, maintenance, testing, repair, and replacement of metering and data acquisition equipment specified in Attachments 2 and 3 of this Agreement. The Interconnection Customer’s metering (and data acquisition, as required) equipment shall conform to applicable industry rules and Operating Requirements.

  • Lighting A system of fixtures providing or controlling the light sources used on or near the airport or within the airport buildings. The field lighting includes all luminous signals, markers, floodlights, and illuminating devices used on or near the airport or to aid in the operation of aircraft landing at, taking off from, or taxiing on the airport surface.

Time is Money Join Law Insider Premium to draft better contracts faster.