Tapered Roof Insulation Sample Clauses

Tapered Roof Insulation. One layer of the tapered roof insulation assembly shall be factory tapered to create a finished roof slope as indicated. Provide starter and filler blocks as required. Mitered joints shall be factory fabricated and shall consist of two diagonally cut boards or one board shaped to provide the required slopes. Identify each piece of tapered insulation board by color or other identity coding system, allowing the identification of different sizes of tapered insulation board required to complete the roof insulation system.
AutoNDA by SimpleDocs
Tapered Roof Insulation. A. Tapered roof insulation shall be Isocyanrate board with asphalt paper top surface conforming to Fed. Spec. HHI-1972/GEN, HHI-1972/2. Aged R-value shall meet X.X.X. XXXX TECH bulletin 281-1. All insulation pieces will be tapered to achieve slopes indicated in the Drawings, minimum slope 1/2 inch per foot, and 1/2 inch per foot at crickets. The minimum thickness shall be 1/2 inch. All pieces shall be numbered as to their respective locations on the roof.

Related to Tapered Roof Insulation

  • Insulation In exterior walls? Yes No Unknown In ceiling/attic? Yes No Unknown In any other areas? Yes No Where? Comments:

  • Electrical appliance safety The Hirer shall ensure that any electrical appliances brought by them to the premises and used there shall be safe, in good working order, and used in a safe manner in accordance with the Electricity at Work Regulations 1989. Where a residual circuit breaker is provided the hirer must make use of it in the interests of public safety.

  • Electrical Safety Only UL approved items are permitted in Housing & Residence Life. Extension and multi-use cords must be heavy duty, single plug, and be UL approved. Altering or adapting electrical outlets and equipment and overloading circuits jeopardize safety and thus are not permitted.

  • Exterior Drainage Does water stand on the property for more than 24 hours after a heavy rain? Yes No Unknown Comments Are gutters and downspouts in good repair? Yes No Unknown Comments:

  • Glass Or Safety Glazing Material a. We cover:

  • Road Surfaces (1) Grade, shape, crown, and/or outslope surface and shoulders.

  • Smoke Detectors At Owner's expense, smoke detectors will be installed on the Property in working condition in accordance with the law prior to the tenant's occupancy. During the occupancy, it shall be the tenant's responsibility to maintain all smoke detectors. Owner will replace smoke detector equipment as needed.

  • Roofing a. Installation of scaffolding, polyethylene sheeting, or tarps, provided such work will not result in additional damage or irreversible alterations to character defining features.

  • Ventilation Where noxious or poisonous gases may accumulate, the City shall provide proper protection and ventilation. Proper lighting and ventilation shall be provided for all enclosed working spaces. All work in enclosed and confined spaces shall be performed in accordance with applicable Federal, State and local regulations. Spray painting shall be done only by qualified painters.

  • Temperature Where low temperature and/or self-service cases are used for any of such merchandise coming under the jurisdiction of the Union, such cases shall be served only by employees covered by this Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.