Superstructure. 2.1 All external walls to be 220mm thick and internal walls to be 110mm thick, constructed with standard 7 MPA cement bricks.
Superstructure. Reinforced cement concrete frame structure or load bearing masonry structure in accordance with applicable earthquake zone and Bureau of Indian Standards (BIS) codes (refer note 14-j).
Superstructure. The entire bridge structure above the substructure, including anchorage and anchor bolts, but excluding the parapets, backwalls, and wingwalls of abutments.
Superstructure. The part of the Structure above:
Superstructure. If the as-designed bridge superstructure consists of curved girders, as shown on the structure drawings, the alternate design bridge superstructure is also to consist of curved girders. Provide slab designs conforming to the requirements of Standard Drawing BD-601M. Use composite design only, unless the "as- designed" bridge structure utilized noncomposite design.
Superstructure. State the type of materials used (e.g. reinforced concrete using Grade 30 concrete manufactured from Portland Cement complying with SS26 steel reinforcement bar complying with SS22).
Superstructure. All weathertight exterior bulkheads shall be hose tested for tightness prior to coating. All weathertight doors, windows, manholes, and hatches shall be hose tested for tightness.
Superstructure. 4.1. Superstructure:
Superstructure. All of that part of a Bridge structure above bridge seats or skewbacks of arches not classified as Substructure. Supplemental Specifications. Special written or printed clauses supplemental to or superceding the Standard Specifications setting forth requirements peculiar to the specific Work included in the Contract.
Superstructure. The size of the superstructure must accommodate future track(s) per Section 4.1.3 and Access Road per Section
