Stone pitching Sample Clauses

Stone pitching. The ground to receive pitching shall be well compacted and the stone; which shall be flat bedded and not less than 230 mm either way along the bearing surface, shall be punned to the required falls and inclinations so that neither wedges nor spalls are required to keep the pitching rigidly in place. The joints shall be no more than 13 mm thick solidly filled with 1:3 cement mortar and pointed.
AutoNDA by SimpleDocs
Stone pitching. Sr. No. Chainage (Km) Design Length ( Km TCS Code Remarks From To (1) (2) (3) (4) (5) (6)

Related to Stone pitching

  • Infrastructure Vulnerability Scanning Supplier will scan its internal environments (e.g., servers, network devices, etc.) related to Deliverables monthly and external environments related to Deliverables weekly. Supplier will have a defined process to address any findings but will ensure that any high-risk vulnerabilities are addressed within 30 days.

  • Crossing Picket Lines The Company will not expect an employee to cross a picket line, including a picket line at a customer site, if to do so would place the employee's life, limb or personal property in jeopardy.

  • Moonlighting 24.01 The Company and the Union agree in principle to eliminate the practice commonly referred to as moonlighting.

  • Playground ~ The playground is primarily for the use of children under the age of twelve (12). Any child caught throwing rocks, vandalizing, or hitting or teasing other children will be asked to leave the playground. An adult or appropriate baby-sitter must accompany all children under the age of six (6) years old. Garbage ~ The storage, collection and disposal of refuse and garbage in the recreational camping areas shall be conducted as to create no health hazards, rodent harborage, insect breeding areas, accident or fire hazards, or air pollution. Bag all food garbage in plastic and tie shut before placing in the dumpster, to prevent odor and rodents which are drawn to the garbage area, such as skunks, raccoons etc. Dumpster is for normal daily household garbage, no large boxes, building supplies, carpets etc. Camper is to dispose of this type of garbage elsewhere. Garbage may be placed in dumpsters only. If a dumpster is full, do not place garbage on or around the dumpster, find an empty dumpster to place your garbage into. Bags of garbage may not be set outside your camper for any reason. Disposal or deposit of hazardous or toxic waste is prohibited. No gas, oil, batteries, or car fluids may be deposited into the dumpsters or around the dumpsters. Hazardous materials will not be disposed of by the garbage service. Disposal or deposit of furniture, barbeque grills, washer, dryers, and other large household items are NOT permitted on, in or around the dumpsters. Holding Tanks ~ There is no size restriction on holding tanks, however, they must be opaque XX xxxx/black water approved tanks. The on-site dump station may be used to empty tanks that hold 50 gallons or less. For tanks over 50 gallons Camper must contract with a pumping service to pump and remove tank contents from campground. No dumping of xxxx water onto the ground. Docks ~ Campground does NOT have a lifeguard on duty. The docks are privately owned. In order to be on someone's dock you must receive permission from the dock owner. An adult must accompany all children on the docks after dark. Life jackets are required for young children fishing off docks. Running, diving, and/or horseplay are not allowed on the docks. All debris and toys must be removed from the docks, beach and marina area. Inappropriate behavior, intoxication or shouting on docks is not allowed. Glass is not allowed on the beach area. Jet skies, wave runners, etc. are not permitted in the marina area. Tires cannot be left in the marina area under boats or tied onto docks. Fish House ~ Clean up fish cleaning facility when done with your fish cleaning and bag all fish remains. Fish cleaning house must be kept clean and all fish waste must be put into plastic bags and deposited into dumpster and cover on dumpster closed. No dumping of fish wastes into marina or dog waste stations! Swimming Pool ~ Campers are required to abide by all rules posted in and around the pool area.

  • Firefighters Any truck with an inoperative aerial ladder shall be regularly and routinely staffed with one (1) officer and five (5) firefighters for the period of time that the aerial ladder is inoperative, or until such time as the truck with the inoperative aerial ladder is replaced with a truck with an operative aerial ladder. At 0800 and 2000 hours, all trucks shall be staffed with one (1) officer and four (4) firefighters, and any truck with an inoperative aerial ladder shall be staffed with one (1) officer and five (5) firefighters.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If CBB chooses to subtend a Verizon access Tandem, CBB’s NPA/NXX must be assigned by CBB to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG.

  • Dewatering 4.7.1 Where a part of a site is affected by surface water following a period of rain, thus rendering some areas unsafe for productive work, consistent with the Employer’s obligations under the OH&S Act, all non- trades employees shall assist in ‘dewatering’ their own work site or area if it is so affected. Such work to be paid at single time rates. Productive work will continue in areas not so affected.

  • Configuration Management The Contractor shall maintain a configuration management program, which shall provide for the administrative and functional systems necessary for configuration identification, control, status accounting and reporting, to ensure configuration identity with the UCEU and associated cables produced by the Contractor. The Contractor shall maintain a Contractor approved Configuration Management Plan that complies with ANSI/EIA-649 2011. Notwithstanding ANSI/EIA-649 2011, the Contractor’s configuration management program shall comply with the VLS Configuration Management Plans, TL130-AD-PLN-010-VLS, and shall comply with the following:

  • Millwright Xxxxx be to assist and work under the direction and instructions I or A. He will work alone at times performing assignments in keeping with his training. During the course of his year, training must become proficient in good practices in the areas of fitting, aligning, lubricating and the operation of all shop tools and machines. In addition to the foregoing, he will be exposed to and the process of learning techniques required in trouble shooting key production machinery, pipe fitting, basic welding and machining but not be expected to display a high degree of proficiency in these areas at this point. Millwright Must be capable of performing the tasks of fittings, aligning, lubricating an able to operate all shop tools and machines. Must under direction become proficient in basic welding and pipe fitting as well as dismantling and reassembly of plant equipment. Under direction,will continueto develop skills in trouble shooting all plant equipment and improve his skills at machining part and be exposed to basic principles of hydraulics and pneumatic. He may work alone frequently, but occasionally will require direction and instructions form Millwright I or A. Millwright 11: be capable, without direction of fitting, aligning and lubrication and taking apart and reassembling plant equipment. In addition, is expected to be able to weld, operate shop tools and do pipe fitting as required. Must under direction, become proficient at effective methods of trouble shooting and repairing hydraulic, pneumatic and mechanical faults in plant machinery. I: Must be capable without direction of performing all practices under Xxxxxxxxxx Must under directionbecomeproficient at reading and understanding blueprints, all phases of installing new equipment, laying out hydraulic and mechanical drives and meet speed and power requirements correctly. Xxxxxxxxxx "A": Must he capable without direction, of performing all under Xxxxxxxxxx X, and Must take full responsibility for work done by himself or his assistant. Must he in possession of a Millwright Certificate or a Machinist Certificate or Welder Certificate. Millwrightspresently employed in this classification will not be required to have a Certificate.

  • Telemedicine Services This plan covers clinically appropriate telemedicine services when the service is provided via remote access through an on-line service or other interactive audio and video telecommunications system in accordance with R.I. General Law § 27-81-1. Clinically appropriate telemedicine services may be obtained from a network provider, and from our designated telemedicine service provider. When you seek telemedicine services from our designated telemedicine service provider, the amount you pay is listed in the Summary of Medical Benefits. When you receive a covered healthcare service from a network provider via remote access, the amount you pay depends on the covered healthcare service you receive, as indicated in the Summary of Medical Benefits. For information about telemedicine services, our designated telemedicine service provider, and how to access telemedicine services, please visit our website or contact our Customer Service Department.

Time is Money Join Law Insider Premium to draft better contracts faster.