SS7 Signaling Sample Clauses

SS7 Signaling. Except as otherwise provided herein, if SS7 signaling is provided by Telco, it will be provided in accordance with Appendix – SS7 (Wireless). Appendix – SS7 (Wireless) describes various SS7 elements available for Carrier to purchase from Telco, including elements required to exchange ISUP SS7 Signaling Messages(s) (as defined in Telcordia Document GR-246-CORE) associated with Local Calls.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
SS7 Signaling. In order to track and monitor the traffic that is being exchanged at the POI both Parties agree to utilize SS7 Common Channel Signaling between their respective networks for the traffic addressed in this Agreement. Both Parties will provide CCS connectivity in accordance with accepted industry practice and standard technical specifications. To the extent supported by a Party, for all traffic delivered to the POI, the Parties agree to exchange all appropriate unaltered CCS messages for call set-up, including without limitation ISDN User Part ("ISUP") and Transaction Capability User Part (“TCAP") messages to facilitate interoperability of CCS based features and functions between their respective networks, including CLASS features and functions. All CCS signaling parameters, including, but not limited to, the Jurisdictional Indicator Parameter (“JIP”) and the originating End User telephone number, will be provided by each Party in conjunction with all traffic it delivers to the POI.
Sample 1Sample 2
SS7 Signaling. Where available, the Parties will use Common Channel Interoffice Signaling (CCIS) to set up calls between the Parties’ Telephone Exchange Service networks. Each Party shall provide Calling Party Number (CPN) within the SS7 signaling message, if available. If CCIS in unavailable, Multi-Frequency (MF) signaling shall be used by the Parties. Each Party shall charge the other Party rates for CCIS signaling at the rates set forth in their respective tariffs.
Sample 1
SS7 Signaling. Both Parties will utilize LEC-to-LEC SS7 Signaling, where available, in conjunction with all traffic in order to enable interoperability of CLASS features and functions except for call return. SS7 signaling parameters will be provided, including but not limited to ANI, originating line information (OLI) calling company category and charge number. Privacy indicators will be honored, and the Parties will exchange Transactional Capabilities Application Part (TCAP) messages to facilitate SS7 based features between the respective networks. Neither Party shall alter the SS7 parameters, or be a party to altering such parameters, or knowingly pass SS7 parameters that have been altered in order to circumvent appropriate interconnection charges. Nothing herein shall obligate or otherwise require BellSouth to send SS7 messages or call-related database queries to ComSouth’s or any other third party’s call-related database, unless otherwise agreed to by the Parties under a separate agreement.
Sample 1
SS7 Signaling. Both Parties will utilize LEC-to-LEC SS7 Signaling, where available, in conjunction with all traffic in order to enable full interoperability of CLASS features and functions except for call return. All SS7 signaling parameters will be provided, including but not limited to automatic number identification (ANI), originating line information (OLI) calling company category and charge number. All privacy indicators will be honored, and the Parties will exchange Transactional Capabilities Application Part (TCAP) messages to facilitate full interoperability of SS7-based features between the respective networks. Neither Party shall alter the SS7 parameters, or be a party to altering such parameters, or knowingly pass SS7 parameters that have been altered in order to circumvent appropriate interconnection charges.
Sample 1
SS7 Signaling. Except as otherwise provided herein, if SS7 signaling is provided by Ameritech, it will be provided in accordance with Appendix – SS7 (Wireless). Appendix – SS7 (Wireless) describes various SS7 elements available for Carrier to purchase from Ameritech, including elements required to exchange ISUP SS7 Signaling Messages(s) (as defined in Ameritechrdia Document GR-246-CORE) associated with Local Calls.
Sample 1

Related to SS7 Signaling

  • Signaling Each Party will provide the other Party with access to its databases and associated signaling necessary for the routing and completion of the other Party’s traffic in accordance with the provisions contained in the Unbundled Network Element Attachment or applicable access tariff.

  • SS7 Network Interconnection 9.7.1 SS7 Network Interconnection is the interconnection of Global Connection local signaling transfer point switches or Global Connection local or tandem switching systems with BellSouth signaling transfer point switches. This interconnection provides connectivity that enables the exchange of SS7 messages among BellSouth switching systems and databases, Global Connection local or tandem switching systems, and other third-party switching systems directly connected to the XxxxXxxxx XX0 network.

  • Use of Verizon Telecommunications Services 2.1 Verizon Telecommunications Services may be purchased by Connectel under this Resale Attachment only for the purpose of resale by Connectel as a Telecommunications Carrier. Verizon Telecommunications Services to be purchased by Connectel for other purposes (including, but not limited to, Connectel’s own use) must be purchased by Connectel pursuant to other applicable Attachments to this Agreement (if any), or separate written agreements, including, but not limited to, applicable Verizon Tariffs.

  • Network Interconnection 26.1 Interconnection between the networks of different SERVICE PROVIDERs shall be as per National Standards of CCS No.7 issued from time to time by Telecom Engineering Centre (TEC) and also subject to technical feasibility and technical integrity of the Networks and shall be within the overall framework of interconnection regulations issued by the TRAI from time to time. However, if situation so arises, INTERCONNECTION with R2MF signaling may be permitted by LICENSOR.

  • Connectivity User is solely responsible for providing and maintaining all necessary electronic communications with Exchange, including, wiring, computer hardware, software, communication line access, and networking devices.

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • Availability of Verizon Telecommunications Services 3.1 Verizon will provide a Verizon Telecommunications Service to PCS for resale pursuant to this Attachment where and to the same extent, but only where and to the same extent, that such Verizon Telecommunications Service is provided to Verizon’s Customers.

  • Local Control Center, Metering and Telemetry The NTO shall operate, pursuant to ISO Tariffs, ISO Procedures, Reliability Rules and all other applicable reliability rules, standards and criteria on a twenty-four (24) hour basis, a suitable local control center(s) with all equipment and facilities reasonably required for the ISO to exercise ISO Operational Control over NTO Transmission Facilities Under ISO Operational Control, and for the NTO to fulfill its responsibilities under this Agreement. Operation of the NYS Power System is a cooperative effort coordinated by the ISO control center in conjunction with local control centers and will require the exchange of all reasonably necessary information. The NTO shall provide the ISO with Supervisory Control and Data Acquisition (“SCADA”) information on facilities listed in Appendices A-1 and A-2 herein as well as on generation and merchant transmission resources interconnected to the NTO’s transmission facilities pursuant to the ISO OATT. The NTO shall provide metering data for its transmission facilities to the ISO, unless other parties are authorized by the appropriate regulatory authority to provide metering data. The NTO shall collect and submit to the ISO billing quality metering data and any other information for its transmission facilities required by the ISO for billing purposes. The NTO shall provide to the ISO the telemetry and other operating data from generation and merchant transmission resources interconnected to its transmission facilities that the ISO requires for the operation of the NYS Power System. The NTO will establish and maintain a strict code of conduct to prevent such information from reaching any unauthorized person or entity.

  • Signaling Link Transport 9.2.1 Signaling Link Transport is a set of two or four dedicated 56 kbps transmission paths between Global Connection-designated Signaling Points of Interconnection that provide appropriate physical diversity.

  • Cable Television, Telephone & Internet Services Long Distance calling may be done only through the use of a prepaid phone card or by charges made to a third party number if using a provided, in room telephone. Neither the Institution nor the Manager guarantees the availability of telephone service or cable television services. If the Resident wants additional cable television, telephone or internet service above and beyond any that may be provided as “standard” in the Residence, the Resident must submit full details to and request and obtain the prior written approval of the Manager and Institution. With respect to Internet Services, the Institution may at its discretion only allow either the standard provided service or the approved alternate service and not both at the same time (Residents will need to complete the Institution’s standard forms issued by their IT department). Cutting of wiring, boring of holes, the use of wireless routers, routers, or switches are not permitted. Any unauthorized services or equipment may be removed by the Manager, at the Resident’s expense, without notice or liability. All Residents are subject to the Institution’s and/or Service Provider’s current Internet, cable television and telephone enrolment and usage policies.

Time is Money Join Law Insider Premium to draft better contracts faster.