SPECIAL CHARACTERISTICS. In line with operational requirements, work may be at any service location within the Corporation and a component of evening and weekend may be required as part of the normal rostered hours of duty of this position. Physical work and manual handling is an intrinsic requirement of this role. This includes: • standing for significant periods of time
SPECIAL CHARACTERISTICS. Special characteristics require special attention since deviations in characteristics defined as “special” can affect product safety, useful life, assembly capability, functions or quality of subsequent manufacturing operations as well as statutory provisions to a significant extent. Such characteristics are established by the OEM and/or voestalpine. They are made clear in the relevant specifications and are documented in the document entitled “Special characteristics and documentation with special archiving” and/or are based on the supplier’s risk assessment, e.g. based on the product and/ or process FMEA. All product and process characteristics are of special importance to voestalpine and must be complied with by the supplier. The supplier must identify and label them in all relevant product and process documents, such as drawings, FMEAs, risk assessments, work, testing and production control plans. These characteristics must be given special consideration and monitoring during all relevant planning steps. For the verification of critical characteristics, the scope and retention period for the necessary documents must be defined based on risk evaluation and with due consideration of voestalpine’s and/or the OEM’s requirements. Special characteristics shall usually be structured as follows: critical characteristics (characteristics with special verification) (e.g. CC/ BCC), functionally important / process-important characteristics (e.g. SC/ BSC). The special characteristics per delivery batch shall be measured in sufficient numbers – by risk – and documented and retained for at least 30 years.
SPECIAL CHARACTERISTICS. The Resident and the Resident Representative are hereby advised that the Center is a Kosher facility, that all food served by the Center will be prepared in accordance with traditional Jewish rules of Kashrut, and that certain food products (such as pork and shellfish) are not served. It is further understood that, during the week of the Passover Holiday, foods with leavening and certain other types of foodstuffs may not be available.
SPECIAL CHARACTERISTICS. Special characteristics require special attention, as deviations in these characteristics can severely impact the assembly, life cycle, product safety, the function or quality of subsequent manufacturing processes as well as legal provisions. These are characteristics with: Critical characteristics with special verification management hereinafter referred to as Essential characteristics hereinafter referred to as H Depending on the CLIENT's customer specifications, the K and H characteristics have different symbols on the technical specifications. The CONTRACTOR is responsible for identifying and correctly specifying the special characteristics based on the CONTRACTOR's risk analysis as well as based on the specifications, requirements specification, or other information from the CLIENT. The CONTRACTOR is obligated monitor and document the manufacturing process with appropriate methods in such a way that the process capability can be demonstrated at any time throughout the entire production time. If process capability is not present, then the process must must be safeguarded with a 100% inspection. Requirement for process capability CPK K characteristic 1.67 H characteristic 1.33 7 Advanced product quality planning, first article , re-qualification, IMDS, changes
SPECIAL CHARACTERISTICS. Special characteristics are characteristics that require increased carefulness and are not regulated by other processes. Special characteristics are divided into three categories and identified as follows:
SPECIAL CHARACTERISTICS. Generally speaking, all product and process characteristics are important and must be maintained. Special characteristics – those that are important to functionality and process-critical quality, as well as those that require special evidence – demand special care, as deviations in these characteristics could affect the assembly capability, functionality, or quality of subsequent production operations as well as legal regulations in particular. These are determined by us and our customer and/or result from the design and/or process FMEA of the Supplier.
SPECIAL CHARACTERISTICS. Special Characteristics are any product characteristics defined by Continental or customers or manufacturing process parameters identified by the Supplier including government and safety regulations, which have a substantial influence on the: - manufacturability at Continental - manufacturability at the customer - usage and operation of the product by the customer - compliance with applicable regulations - compliance to applicable safety requirements Special Characteristics are further categorized into: - Characteristics not relating to safety or legal considerations - Characteristics with safety or legal considerations In accordance with the requirements of ISO/TS 16949, Special Characteristics shall be identified and specifically addressed in the Design-FMEA, Process-FMEA, Control Plans, Process Flows, work instructions and other associated documents. Continental required Special Characteristics will be identified on drawings/specifications or in a separate document that cross-references these characteristics to the drawings/specifications. The supplier is responsible to fully understand the process impact to their product and identify any process parameter Special Characteristics as they deem appropriate. Suppliers are also responsible for ensuring that relevant Special Characteristics are explained, understood and controlled by their sub-suppliers where applicable.
SPECIAL CHARACTERISTICS. 1.7.1 Special characteristics require special attention since deviations in characteristics defined as “special” can affect product safety, useful life, assembly capability, functions or quality of subsequent manufacturing operations as well as statutory provisions to a significant extent.
SPECIAL CHARACTERISTICS. This position will work on a rotating roster with evening and weekend work required as part of the normal hours of duty for this position. • Geelong Arts Centre requires that the incumbent for the position of all roles must undergo pre- employment identity checks and both National and International Police Checks (if spent more than 2 years overseas). Any unspent convictions must be disclosed prior to appointment, or the offer of employment may be revoked. Ongoing currency relating to police checks must be maintained for the duration of employment.
SPECIAL CHARACTERISTICS. Special characteristics require special attention since deviations in characteristics defined as “special” can affect product safety, useful life, assembly capability, functions or quality of subsequent manufacturing operations as well as statutory provisions to a significant extent. Such characteristics are established by the OEM and/ or voestalpine. They are made clear in the relevant specifications and are documented in the document entitled “Special characteristics and documentation with special archiving” and/ or are based on the supplier’s risk assessment, e.g. based on the product and/ or process FMEA. All product and process characteristics are of special importance to voestalpine and must be complied with by the supplier. The supplier must identify and label them in all relevant product and process documents, such as drawings, FMEAs, risk assessments, work, testing and production control plans. These characteristics must be given special consideration and monitoring during all relevant planning steps. For the verification of critical characteristics, the scope and retention period for the necessary documents must be defined based on risk evaluation and with due consideration of voestalpine’s and/ or the OEM’s requirements. Special characteristics shall usually be structured as follows: ⮚ critical characteristics (characteristics with special verification) (e.g. CC/ BCC), ⮚ functionally important / process-important characteristics (e.g. SC/ BSC). The special characteristics per delivery batch shall be measured in sufficient numbers – by risk – and documented and retained for at least 30 years. Verification for products with critical chracateristics These are products with characteristics that have a significant effect on vehicle safety or on compliance with statutory requirements and which could result in product liability risk. These products and their characteristics shall be labeled in the technical documents and documented, if voestalpine has design responsibility, and/ or, if the supplier has design responsibility, they shall be determined by the supplier during the designing process. In so doing, voestalpine’s requirements shall be followed. The supplier commits to install a verification system for products with critical characteristics. The content of the verification system must meet the requirements of VDA Volume 1 and be designed so that the care exercised can be proven in a claim (exculpatory evidence). If these capabilities are not ach...
