Sizes. The Container sizes to be provided to Single-Family, Multi-Family, Commercial, and Agency Facility Customers are specified in Attachment D. Contractor shall provide Customers with a choice of Container capacities specified in Attachment D, and Customers may select their preferred Container size(s).
Sizes. The Container sizes to be provided to Single-Family, Multi-Family and Commercial Customers shall be specified by Administrator.
Sizes. The container sizes to be provided to single-family, multi-family and commercial customers shall be as specified below:
Sizes. Permanent size marking giving size is to be located inside of collar. CARE LABEL: Care instructions to be on hem of shirt in front. PRESSING & FINISHING: Shirt shall be carefully pressed by hand in a first class manner. All loose threads to be thoroughly trimmed. STANDARD SIZE RANGE: Men's: XS – 5XL; Short, Regular, Tall Lengths Women’s: XS – 2XL; Regular Length MEASUREMENTS: Men's: Size M, Regular Neck Width: 6.5 (plus or minus 0.25 inches) Chest: 46 (plus or minus 0.75 inches) Back Length: 32.5 (plus or minus 0.5 inches) Sleeve Length (from CB neck): 20 (plus or minus 0.5 inches) Women's: Size M, Regular Neck Width: 6 (plus or minus 0.125 inches) Chest: 41 (plus or minus 0.75 inches) Back Length: 28 (plus or minus 0.5 inches) Sleeve Length (from CB neck): 18.5 (plus or minus 0.5 inches) ATTACHMENT G: SPECIFICATIONS 4660 BLAUER SOFT SHELL ACTIVE DUTY JACKET; LINER TO SYSTEM OUTERWEAR COLOR: BLACK DATE: March 28, 2018 GENERAL: All garment details not specifically described herein; tailoring, styling, construction, materials, and components must match the standard reference sample on file with the agency. Written specifications attempt to describe key requirements of a 3D garment and cannot do so adequately and therefore silence of the specifications does not absolve bidders from matching with precision the standard reference sample. Pre-bid samples will be required at the time of the bid opening. Samples may be subjected to laboratory testing at the discretion of the contracting officer. Bidders are responsible for all testing costs of their sample garments. Bidders must enclose evidence (dated manufacturers catalogs or similar) that this item is currently a commercial in-stock style. The successful bidder will provide a full size run of try-on garments within 10 days for agency approval. Garments must be manufactured to ISO 9001 quality assurance standard. A copy of the certificate registration will be required with the bid. Specification based on Unisex Size Medium, Regular length. FABRIC: Outer shell content: 88% Nylon, 12% Spandex with a durable water repellant and soil release finish. Softshell Fleece (laminated to inside) 50% Polyester, 44% Nylon, 6% Spandex. Shall be deep color reactive dyed, colorfast to home laundering, and have a permanent press finish. Shrinkage - +/-3% for torque and +/-7% for length & width Weight – 310 GSM OTHER: • Pocketing: Brushed 100% Polyester 2 x 1 Twill • Interlining: Non-fusible Pellon Softshell Fleece (laminated to i...
Sizes. 2.3.1 The size is acceptable as per WI-8.2.4-2.008, if the sample falls within the dimensions defined in the table below. Product Size (on label) Specification for Dimension 1 Specification for Dimension 2 15 cm x 15 cm (6” x 6”) 15.3 cm – 16.4 cm S 15.3 cm – 17.5 cm P S = dimension established during slitting of the master roll into smaller width mini rolls P = dimension established during packaging when the pads are cut off the smaller width mini rolls
Sizes. 4.1 Each stream of Flex Services is made available as a service purchased in blocks of hours, with extra days available for purchase at the Optional Extra Day Rate.
Sizes. Permanent size marking giving size to be located inside of collar. CARE LABEL: Care instructions to be located behind size label. PRESSING & FINISHING: Jacket shall be carefully pressed by hand in a first class manner. All loose threads to be thoroughly trimmed. UNISEX SIZING: Short: XS - XL Regular: XS - 6XL Tall: M - 6XL MEASUREMENTS Size: M, Regular length
Sizes. All image and album sizes are nominal. Xxxxxx Bath Photography will provide a pleasing colour balance but cannot guarantee exact colour matching.
Sizes. 3.3.1 The size, as per WB-10-02-07, is acceptable if the sample falls within the dimensions defined in the table below. Dressing Size (on label) Measured Dimensions (cm) 5” × 5” Length - 12.7 (+ 1.2, - 0.5) (12.5 cm × 12.5 cm) Width - 12.7 (+1.2, - 0.5) Thickness - 0.64 (+ 0.16, - 0.32)
Sizes. 2.3.1 The size is acceptable as per WI-8.2.4-2.008, if the sample falls within the dimensions defined in the table below. Product Size Specification for Specification for (on label) Dimension 1 Dimension 2 5 cm x 5 cm (2” x 2”) 5.1 cm – 6.3 cm S 5.1 cm – 7.4 cm P 10 cm x 10 cm (4” x 4”) 10.2 cm – 11.4 cm S 10.2 cm – 12.5 cm P 10 cm x 20 cm (4” x 8”) 10.2 cm – 11.4 cm S 20.3 cm – 22.6 cm P 20 cm x 40 cm (8” x 16”) 20.3 cm – 22.6 cm P 40.6 cm – 41.8 cm S 40 cm x 40 cm (16” x 16”) 40.6 cm – 41.8 cm S 40.6 cm – 42.9 cm P 10 cm x 120 cm (4” x 48”) 10.2 cm – 11.4 cm S 121.9 cm – 135.0 cm S = dimension established during slitting of the master roll into smaller width mini rolls P = dimension established during packaging when the pads are cut off the smaller width mini rolls
