Common use of SHOP DRAWINGS, PRODUCT DATA AND SAMPLES Clause in Contracts

SHOP DRAWINGS, PRODUCT DATA AND SAMPLES. A. SUBMITTAL PROCESS The Contractor shall check and field verify all dimensions. The Contractor shall check, approve and submit to the Architect/Engineer in accordance with the schedule described in Article 12, Requests for Information and Schedules, all Shop Drawings, Product Data and Samples required by the specifications or required by the Contractor for the Work of the various trades. All Drawings and Product Data shall contain identifying nomenclature and each submittal shall be accompanied by a letter of transmittal identifying in detail all enclosures. The number of copies of Shop Drawings and Product Data to be submitted shall be as specified in the Specifications and if no number is specified then three copies shall be submitted. The Architect/Engineer shall review and comment on the Shop Drawings and Product Data within the time provided in the agreed upon schedule for conformance with information given and the design concept expressed in, or reasonably inferred from, the Contract Documents. The nature of all corrections to be made to the Shop Drawings and Product Data, if any, shall be clearly noted, and the submittals shall be returned to the Contractor for such corrections. If a change in the scope of the Work is intended by revisions requested to any Shop Drawings and Product Data, the Contractor shall be requested to prepare a change proposal in accordance with Article 35, Changes In The Work. On resubmitted Shop Drawings, Product Data or Samples, the Contractor shall direct specific attention in writing on the transmittal cover to revisions other than those corrections requested by the Architect/Engineer on any previously checked submittal. The Architect/Engineer shall promptly review and comment on, and return, the resubmitted items. The Contractor shall thereafter furnish such other copies in the form approved by the Architect/Engineer as may be needed for the prosecution of the Work.

SHOP DRAWINGS, PRODUCT DATA AND SAMPLES. A. 13.1 SUBMITTAL PROCESS The Contractor Design/Build Entity shall check and field verify all dimensions. The Contractor Design/Build Entity shall check, approve and submit to the Principal Representative and Design Build Entity’s Architect/Engineer in accordance with the schedule described in Article 12, Requests for Information and Schedules, all Shop Drawings, Product Data and Samples required by the specifications or required by the Contractor Design/Build Entity for the Work of the various trades. All Drawings and Product Data shall contain identifying nomenclature and each submittal shall be accompanied by a letter of transmittal identifying in detail all enclosures. The number of copies of Shop Drawings and Product Data to be submitted shall be as specified in the Specifications and if no number is specified then three copies shall be submitted. The Design Build Entity’s Architect/Engineer shall review and comment on the Shop Drawings and Product Data within the time provided in the agreed upon schedule for conformance with information given and the design concept expressed in, or reasonably inferred from, the Contract Documents. The nature of all corrections to be made to the Shop Drawings and Product Data, if any, shall be clearly noted, and the submittals shall be returned to the Contractor Design/Build Entity for such corrections. If a change in the scope of the Work is intended by revisions requested to any Shop Drawings and Product Data, the Contractor shall be requested to prepare a change proposal in accordance with Article 35, Changes In The Work. On resubmitted Shop Drawings, Product Data or Samples, the Contractor Design/Build Entity shall direct specific attention in writing on the transmittal cover to revisions other than those corrections requested by the Design Build Entity’s Architect/Engineer on any previously checked submittal. The Design Build Entity’s Architect/Engineer shall promptly review and comment on, and returnreturn to the Design/Build Entity and Principal Representative, the resubmitted items. The Contractor Design/Build Entity shall thereafter furnish such other copies in the form approved by the Principal Representative and Design Build Entity’s Architect/Engineer as may be needed for the prosecution of the Work.

SHOP DRAWINGS, PRODUCT DATA AND SAMPLES. A. SUBMITTAL PROCESS (a) Shop Drawings are drawings, diagrams, schedules and other data specially prepared for the Work by the Contractor or a Subcontractor, Sub-subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work. (b) Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate materials or equipment for some portion of the Work. (c) Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged. (d) Shop Drawings, Product Data, Samples and similar submittals are not Contract Documents. The purpose of their submittal is to demonstrate for those portions of the Work for which submittals are required by the Contract Documents the way by which th... (e) The Contractor shall check and field verify all dimensions. The Contractor shall checkreview for compliance with the Contract Documents, approve and submit to the Architect/Engineer in accordance with the schedule described in Article 12, Requests for Information and Schedules, all Architect Shop Drawings, Product Data Data, Samples and Samples similar submittals required by the specifications or required by the Contractor for the Work of the various trades. All Drawings Contract Documents with reasonable promptness and Product Data shall contain identifying nomenclature in such seque... (f) By approving and each submittal shall be accompanied by a letter of transmittal identifying in detail all enclosures. The number of copies of submitting Shop Drawings and Product Data to be submitted shall be as specified in the Specifications and if no number is specified then three copies shall be submitted. The Architect/Engineer shall review and comment on the Shop Drawings and Product Data within the time provided in the agreed upon schedule for conformance with information given and the design concept expressed inDrawings, or reasonably inferred from, the Contract Documents. The nature of all corrections to be made to the Shop Drawings and Product Data, if anySamples and similar submittals, shall be clearly noted, and the submittals shall be returned to the Contractor for such corrections. If a change in represents that the scope Contractor has determined and verified materials, field measurements and field construction criteria related thereto, or wi... (g) The Contractor shall perform no portion of the Work is intended by revisions requested to any for which the Contract Documents require submittal and review of Shop Drawings and Drawings, Product Data, Samples or similar submittals until the respective submittal has been approved by the Architect. (h) The Work shall be in accordance with approved submittals except that the Contractor shall not be requested to prepare a change proposal relieved of responsibility for deviations from requirements of the Contract Documents by the Architect’s approval of Shop Drawings, Product Data, Samp... (i) The Contractor shall direct specific attention, in accordance with Article 35, Changes In The Work. On writing or on resubmitted Shop Drawings, Product Data Data, Samples or Samplessimilar submittals, the Contractor shall direct specific attention in writing on the transmittal cover to revisions other than those corrections requested by the Architect/Engineer Architect on any previously checked submittalprevious submittals. The Architect/Engineer shall promptly review and comment on, and return, In the resubmitted items. absence of such writte... (j) The Contractor shall thereafter furnish not be required to provide professional services which constitute the practice of architecture or engineering unless such other copies in the form approved services are specifically required by the Architect/Engineer as may be needed Contract Documents for the prosecution a portion of the Work.Work or unless the Con... (k)

SHOP DRAWINGS, PRODUCT DATA AND SAMPLES. A. SUBMITTAL PROCESS The Contractor Design/Build Entity shall check and field verify all dimensions. The Contractor Design/Build Entity shall check, approve and submit to the Principal Representative and Architect/Engineer in accordance with the schedule described in Article 12, Requests for Information and Schedules, all Shop Drawings, Product Data and Samples required by the specifications or required by the Contractor Design/Build Entity for the Work of the various trades. All Drawings and Product Data shall contain identifying nomenclature and each submittal shall be accompanied by a letter of transmittal identifying in detail all enclosures. The number of copies of Shop Drawings and Product Data to be submitted shall be as specified in the Specifications and if no number is specified then three copies shall be submitted. The Architect/Engineer shall review and comment on the Shop Drawings and Product Data within the time provided in the agreed upon schedule for conformance with information given and the design concept expressed in, or reasonably inferred from, the Contract Documents. The nature of all corrections to be made to the Shop Drawings and Product Data, if any, shall be clearly noted, and the submittals shall be returned to the Contractor Design/Build Entity for such corrections. If a change in the scope of the Work is intended by revisions requested to any Shop Drawings and Product Data, the Contractor shall be requested to prepare a change proposal in accordance with Article 35, Changes In The Work. On resubmitted Shop Drawings, Product Data or Samples, the Contractor Design/Build Entity shall direct specific attention in writing on the transmittal cover to revisions other than those corrections requested by the Architect/Engineer on any previously checked submittal. The Architect/Engineer shall promptly review and comment on, and returnreturn to the Design/Build Entity and Principal Representative, the resubmitted items. The Contractor Design/Build Entity shall thereafter furnish such other copies in the form approved by the Principal Representative and Architect/Engineer as may be needed for the prosecution of the Work.