Seams. Xxxxx is almost never seamless due to the techniques employed to cut the slab of Stone in a way that preserves the maximum beauty of such Stone. Pieces of Stone must therefore be fitted together and the Stone used in the Home will not be seamless and may have visible seams, which are not defects.
Seams. All seams shall be stitched and sealed with a compatible barrier tape film.
Seams. We guarantee professionally constructed durable seams. Professionally constructed seams are not invisible seams. There are many factors affecting whether a seam will be visible including but not limited to the type and amount of natural or artificial lighting in the room, the thickness, construction and color of the carpet. For additional details, refer to xxx.XxxxxxxxxXxx.xxx/xxxxxx-xxxxx.xxx. Quarter Round moldings • Should be removed for best carpet installation Doors • Door cutting is not included in your quote, if this should become necessary.
Seams. Clean seam areas, overlap roofing, and hot-air weld side and end laps of roofing and sheet flashings according to manufacturer's written instructions to ensure a watertight seam installation.
Seams. Sewn seams shall have 6-8 stitches per inch. The sewing techniques used shall be either three thread oxxxxxxx xxxxx or straight/chain stitch. Welded seams shall be performed either by heat or ultrasonic welding.
Seams. Clean and prime splices areas, applying splice tape, and firmly roll side and end laps of overlapping sheets. Seal exposed edges of sheet terminations.
Seams. Fabricate nonmoving seams in sheet copper with flat-lock seams. Tin edges to be seamed, form seams, and solder. Rivet joints for additional strength where required.
Seams. Clean seam areas, overlap roof membrane, and hot-air weld side and end laps of roof membrane and sheet flashings to ensure a watertight seam installation.
Seams. The upper woven and lower knit panels shall be joined with 4 thread mock stitch and single needle top stitch to prevent puckering, while providing a smooth, comfortable seam against the body.
Seams. Fabricate nonmoving seams with flat-lock seams. Form and seal seams as required for type of metal fabrication:
