SCOPE OF WORK OVERVIEW. The Master Contract provides maximum flexibility in acquiring an IT services-based solution for any conceivable IT services-based requirement driving government savings through efficiencies and improved reporting data with greater integrity while maintaining an “Anything IT Anywhere” philosophy. The Master Contract scope includes any and all components of an integrated IT services- based solution, including all current leading edge technologies and any new technologies, which may emerge during the Master Contract period of performance. All IT development methodologies, including Agile which is an encouraged methodology, are supported. The Master Contract scope also includes IT services-based support of National Security Systems, as defined in FAR 39.002. The Master Contract provides IT solutions through performance of a broad range of services, which may include the integration of various technologies critical to the services being acquired. The foundation of the Scope of Master Contract is built on the most current FEA and DoD IEA Reference Models. (See links under Resources Section C.10). As the definition of IT changes over the lifecycle of the Master Contract with the evolving FEA and DoD IEA models, the scope of the Master Contract will be considered to coincide with the current IT definition at any given time. By nature of the alignment to FEA and DoD IEA, the Master Contract includes any and all emerging IT components, IT services, and ancillary elements as they arise as required to successfully achieve the agency’s mission. Therefore, because technological advances over the term of this Master Contract are inevitable, the scope of this Master Contract takes into consideration that Task Order Requirements are permitted to include any future IT services with their integral and necessary ancillary IT components and services as they arise during the entire term of this contract. The scope of the Master Contract includes every conceivable aspect of IT Services, including but not limited to: • 3-D Printing Integration • Agile Development • Big Data • Biometrics /Identity Management • Cloud Computing • Context-aware Computing • Critical Infrastructure Protection and Information Assurance • Cyber Security • Data-Centers and Data-Center Consolidation • Digital Government • Digital Trust and Identity Integration and Management • Digitization and Imaging • Energy and Sustainability Measurement and Management • Enterprise App Stores and Mobile Security • Ent...
SCOPE OF WORK OVERVIEW. The Project shall be engineered and constructed in accordance to the performance and design requirements identified in the Scope of Work, Exhibits, and Appendices and other documents referenced herein. The Project shall be designed to meet a minimum 35 year design life, considering the Site specific conditions and expected operating conditions. Contractor shall provide or cause to be provided materials, equipment, machinery, tools, labor, demolition, disposal, transportation, construction fuels, chemicals, construction utilities, administration, and other services and items required to complete the Project per the requirements set forth in this Exhibit A. Contractor shall provide an Energy Production Estimate based upon their proposed design using the latest version of PVSyst simulation software. Solar Irradiance information should be obtained from National Renewable Energy Laboratory (NREL) Solar Power Prospector at xxxx://xxxx.xxxx.xxx/prospector, (Average Annual GHI) for the Site. The facility shall be oriented physically to optimize annual energy production. The PV module arrangement, inverter locations and internal access roads (sufficient to allow module washing as required to meet Contractor’s predicted performance) shall be determined by Contractor. Contractor shall design the solar field layout with reference to any required setbacks along the Project property boundary (and sufficient for a security patrol road around the perimeter of the Project).
SCOPE OF WORK OVERVIEW. The Project shall be engineered and constructed in accordance to the performance and design requirements identified in the Scope of Work, Exhibits and Appendices and other documents referenced herein and shall meet or exceed the technical specifications utilized in the attached PVsyst summary document provided as Attachment 4 to Exhibit A. The Project shall be designed to meet a minimum [***]-year design life, considering the site specific conditions and expected operating conditions. The Contractor shall provide or cause to be provided materials, equipment, machinery, tools, labor, demolition, disposal, transportation, construction fuels, chemicals, construction utilities, administration and other services and items required to complete the project per the requirements set forth in the Agreement. In accordance with the Agreement, the Contractor shall acquire and comply with construction permits for the solar array and comply with all permits obtained by the Owner. The Contractor has provided an Energy Production Model based upon its proposed design using the latest version of PVSyst simulation software (report and 8760 hourly generation file). 8760 hourly generation reports and excel files shall be provided for [***] years of generation using the basis of [***] annual degradation on the DC energy. The summer PVsyst report is provided as Attachment 4 to this Exhibit A and the 8760 hourly generation report is provided as Attachment 5 to Exhibit A. Solar Irradiance information should be obtained from National Renewable Energy Laboratory (NREL) Solar Power Prospector at xxxx://xxxx.xxxx.xxx/prospector, (Average Annual GHI) for the Site. The Project shall be oriented physically to optimize annual energy production. The PV module arrangement, inverter locations and internal access roads (sufficient to allow module washing as required) shall be determined by Contractor. The Contractor shall design the solar field layout with reference to any required setbacks along the Project property boundary (and sufficient for a security patrol road or inspection around the Project perimeter). All equipment shall be grounded and bonded in accordance with NEC.
SCOPE OF WORK OVERVIEW. The intent of this scope of work is to facilitate the exchange of information between the COUNTY and the PUBLIC AGENCY to help ensure that efficient and accurate response to emergency calls and text messages in the PUBLIC AGENCY’s jurisdiction within the COUNTY’s provisioning boundary. Such work is in accordance with the Capital Area Council of Governments Interlocal Agreement for 9-1-1 Geographic System Database Management, shown in Exhibit C of this Agreement, which supports the Capital Area Emergency Communications District’s (“CAECD’s” or “District’s”) Strategic Plan. In order to accomplish this:
SCOPE OF WORK OVERVIEW. The Master Contract provides maximum flexibility in acquiring an IT services-based solution for any conceivable IT services-based requirement driving government savings through efficiencies and improved reporting data with greater integrity while maintaining an “Anything IT Anywhere” philosophy. The Master Contract scope includes any and all components of an integrated IT services- based solution, including all current leading edge technologies and any new technologies, which may emerge during the Master Contract period of performance. All IT development methodologies, including Agile which is an encouraged methodology, are supported. The Master Contract scope also includes IT services-based support of National Security Systems, as defined in FAR 39.002. The Master Contract provides IT solutions through performance of a broad range of services, which may include the integration of various technologies critical to the services being acquired. The foundation of the Scope of Master Contract is built on the most current FEA and DoD IEA Reference Models. (See links under Resources Section C.10). As the definition of IT changes over the lifecycle of the Master Contract with the evolving FEA and DoD IEA models, the scope of the Master Contract will be considered to coincide with the current IT definition at any given time. By nature of the alignment to FEA and DoD IEA, the Master Contract includes any and all emerging IT components, IT services, and ancillary elements as they arise as required to successfully achieve the agency’s mission. Therefore, because technological advances
SCOPE OF WORK OVERVIEW. The City is soliciting proposals from qualified organizations to contract for the provision of ambulance operator staffing services, and ambulance transportation related services, for the Costa Mesa Fire & Rescue Department in furtherance of its EMS mission. All ambulance services described in this RFP document and Scope of Work refer only to ground ambulance services. CMF&R desires to staff three (3) 24-hour units with dedicated EMTs provided by Contractor. The City intends to xxxx and collect for all services provided by Contractor. The City shall provide city-owned ambulances for Contractor’s EMTs to operate. The Scope of Work to be provided by Contractor may be categorized into four (4) service tiers:
SCOPE OF WORK OVERVIEW. DSHS’ goal is to upgrade as many of the networking and voice components which are at end of support as soon as possible. Under the direction of DSHS, the Contractor shall be responsible for a modern network infrastructure. Upon mutual agreement, this infrastructure may include managed services for networking, both data and voice, for mission critical enterprise IT services. Usage of this Contract is dependent on available funding and staffing resources. Managed Services for DSHS, if appropriate, shall be done on a site-by-site basis. As needed, DSHS shall direct the Contractor which components and/or services are required at which DSHS sites in writing.
SCOPE OF WORK OVERVIEW. The Work includes removal and off-site disposal of 10,000 cubic yards of 1” minus crushed concrete from vacant land located at 0000 X. Xxxxxxxxxx Xxxxxx, Xxxxxxxx XX 00000 as well as [the removal and legal off-site disposal of scattered organic debris from the same site][to be added if Authority exercises its option to add this scope of work] in accordance with the requirements set forth herein and as further described in Section 2.0.
SCOPE OF WORK OVERVIEW. This Contract will only cover outage(s) works only. Any cutting and welding of Valves and Pipes/Tubes during outage(s) will be catered in this Contract.
SCOPE OF WORK OVERVIEW. The work consists of the installation of a new Kortsen Road Sewer Force Main system, which will include a force main sewer pipe connecting to a new lift station near the intersection of Xxxxx Xx and Xxxxxxx Xx and routing sewer flows west to the City’s Waste Water Reclamation Facility. This new Sewer Force Main will be installed to service future developments in the Casa Grande area. Refer to the Project’s plans for further details. SECTION 105 – CONTROL OF WORK The following subsections are added to the MAG Standard Specifications.
