Sampling and Analysis. The sampling and analysis of the coal delivered hereunder shall be performed by Buyer upon delivery of the coal to Buyer’s facility, and the results thereof shall be accepted and used as defining the quality and characteristics of the coal delivered under this Agreement and as the Payment Analysis. All analyses shall be made in Buyer’s laboratory at Buyer’s expense in accordance with ASTM standards where applicable, or industry-accepted standards in other cases. Samples for analyses shall be taken in accordance with ASTM standards or other methods mutually acceptable to both parties. Seller shall transmit its “as loaded” quality analysis to Buyer as soon as possible. Seller’s “as-loaded” quality shall be the Payment Analysis only when Buyer’s sampler and/or scales are inoperable, or if Buyer fails to obtain a sample upon unloading. Seller represents that it is familiar with Buyer’s sampling and analysis practices, and that it finds them to be acceptable. Buyer shall notify Seller in writing of any significant changes in Buyer’s sampling and analysis practices. Any such changes in Buyer’s sampling and analysis practices shall, except for ASTM or industry-accepted changes in practices, provide for no less accuracy than the sampling and analysis practices existing at the time of the execution of this Agreement, unless the Parties otherwise mutually agree. Each sample taken by Buyer shall be divided into four (4) parts and put into airtight containers, properly labeled and sealed. One (1) part shall be used for analysis by Buyer. One (1) part shall be used by Buyer as a check sample, if Buyer in its sole judgment determines it is XXXXXXXXX COAL COMPANY, INC. LG&E/KU Xxxxxxxx Xx. X00000 necessary. One (1) part shall be retained by Buyer until thirty (30) days after the sample is taken (“Disposal Date”), and shall be delivered to Seller for analysis if Seller so requests before the Disposal Date. One (1) part (the “Referee Sample”) shall be retained by Buyer until the Disposal Date. Seller shall be given copies of all analyses made by Buyer by the fifth (5th) business day of the month following the month of unloading. In addition, Buyer shall send Seller weekly analyses of coal unloaded at Buyer’s facilities. Seller, on reasonable notice to Buyer, shall have the right to have a representative present to observe the sampling and analyses performed by Buyer, Unless Seller requests an analysis of the Referee Sample before the Disposal Date, Buyer’s analysis shall b...
Sampling and Analysis. The Seller has sole responsibility for quality control of the coal and shall forward its “as loaded” quality to the Buyer as soon as possible. The sampling and analysis of the coal delivered hereunder shall be performed by Buyer and the results thereof shall be accepted and used for the quality and characteristics of the coal delivered under this XXXXXXXXX COAL COMPANY, INC LG&E/KU Xxxxxxxx Xx. X00000 Agreement. All analyses shall be made in Buyer’s laboratory at Buyer’s expense in accordance with ASTM standards where applicable, or using standards mutually acceptable, to both parties. Samples for analyses shall be taken by any ASTM standards or standards mutually acceptable to both parties, and may be composited and shall be taken with a frequency and regularity sufficient to provide reasonably accurate representative samples of the deliveries made hereunder. Seller represents that it is familiar with Buyer’s sampling and analysis practices, and finds them to be acceptable. Buyer shall notify Seller in writing of any significant changes in Buyer’s sampling and analysis practices. Any such changes in Buyer’s sampling and analysis practices shall, except for ASTM or mutually agreeable changes in practices, provide for no less accuracy than the sampling and analysis practices existing at the time of the execution of this Agreement, unless the Parties otherwise mutually agree.
Sampling and Analysis. On arrival the company shall arrange for samples to be taken in duplicate from each delivery in accordance with the method laid down in the FOSFA standard contractual method list as amended from time to time, whether rejected or accepted, and to be analysed for oil, moisture, admixture, erucic and free fatty acids where applicable and the results passed to the member within 21 days of the end of the fortnightly period of delivery. Duplicate samples to be retained, as members or the company may call for a check analysis by FOSFA International, London or, by any analyst approved by FOSFA International or, if mutually agreed by an analyst not formally approved by FOSFA International, whose analysis shall be final (providing such a request is made by the claimants within two months of the date of delivery of the goods). Any requests for an official retest must be made in writing to United Oilseeds head office. The cost of check analysis to be for the company provided that the analysis varies from the original test by more than 0.80% for oil or moisture or 0.40% for admixture. If the retest is within these tolerances, costs of check analysis to be for the party who called for the check. All duplicate samples to be retained by the final buyers for 2 months from the date of delivery. The check analysis shall be carried out in accordance with the methods laid down in FOSFA's Standard Contractual methods List : Oil and FFA - FOSFA Official method, Moisture, ISO 665. Admixture ISO 658. THE MEMBER IS CONTRACTUALLY ENTITLED TO A RETEST ON ANY OR ALL OF THE ANALYSIS RESULTS (SEE ABOVE CLAUSE). THE COMPANY WILL ARRANGE FOR RETESTS AT AN APPROPRIATE LABORATORY WHERE ANALYSIS COSTS ARE COMPETITIVE.
Sampling and Analysis. The provisions of Article 6 of the 2015 CSA (other than quality specifications and without regard to cross-references to other provisions of the 2015 CSA) shall apply, and shall replace any provisions of the Original Agreement regarding sampling and analysis or the other matters addressed in Article 6 of the 2015 CSA, in their entirety.
Sampling and Analysis. Each daily shipment of coal shall be sampled and analyzed within twenty-four (24) hours of delivery to the Plant. Such analysis of the coal designated for delivery to Buyer shall be undertaken as a “quick analysis” by an independent laboratory acceptable to Buyer. Seller shall furnish the results of such analysis by facsimile transmission to A.X. Xxxxx Power Plant at (000) 000-0000, within twenty-four (24) hours of delivery to the Plant. Such analyses shall govern for the purposes of determining compliance with the quality specifications required under this Agreement, except as otherwise provided herein below:
Sampling and Analysis. Caltrans shall submit to DTSC a sampling and analysis summary that describes sampling activities and analytical methods typically used to characterize potential contamination at highway projects within 60 days of the Effective Date of the Agreement. /// 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28
Sampling and Analysis. (a) Unless mutually agreed otherwise, representative samples of the Goods shall be drawn during packing by the container packer in accordance with standard protocols as employed at the packing facility to satisfy the sampling requirements of government agencies and to obtain a representative sample of the entire contract/shipment.
Sampling and Analysis. All sampling and analysis will be performed in accordance with methods approved by ASTM or such alternate written standards and procedures mutually agreed to by the Parties. The quality of Dedicated Lignite or Alternate Fuel delivered to Buyer by Seller shall be determined by analysis of samples taken daily at the Facility by the Buyer at a point mutually agreed to by the Parties. Buyer will take samples by means of an automatic mechanical sampling system to be owned, operated and maintained by Buyer. Buyer shall cause the samples to be transported to a laboratory of Buyer=s choice. Buyer=s laboratory shall participate in round xxxxx testing to verify the accuracy of sample preparation and analysis. If the round xxxxx testing establishes that the laboratory=s sample preparation and analysis is inaccurate, the Parties will agree upon a new laboratory. Each sample shall be processed, split into three equal parts and placed in suitable airtight containers by Buyer or the laboratory. Part one of each sample shall be analyzed by the laboratory at Buyer=s expense. Part two of each sample shall be properly identified and stored at the laboratory for a period of not less than fifteen (15) Business Days for Seller to analyze at its own expense if it so desires. Part three of each sample shall be properly identified and stored for a period of not less than thirty (30) Business Days. The cost of analysis of part three of the sample, if required, shall be borne equally by Buyer and Seller. For deliveries for which a sample is not available or for which a sample is agreed by Buyer and Seller to be incorrect, the weighted average of the immediately preceding three (3) Days= sample analyses which are available shall be utilized.
Sampling and Analysis. (a) The Sampling Party shall sample the Coal or shall provide for the Coal to be sampled as it is loaded into each barge or unit train and analyze the sample(s) so obtained for calorific value per pound, percent moisture, percent ash, and percent sulfur. Sampling and weighing shall be done at the same location. The Sampling Party shall notify the Non-Sampling Party and the consigned destination of the short proximate (Btu per pound, percent moisture, percent ash, and percent sulfur content) analytical results of each barge. The Sampling Party's notification shall include its weight determination and the identifying number of each barge or unit train shipped, and shall be provided within 24 hours after the Coal is loaded into barges or railcar for shipment, or within 36 hours should the barge or railcar be loaded on a Saturday. The Sampling Party’s analysis shall be reported to the recipients designated by and in the manner specified by the Non-Sampling Party.
Sampling and Analysis. (a) Representative samples of the goods shall be drawn during loading by the port terminal in accordance with standard protocols as employed at the port terminal to satisfy the sampling requirements of the Commonwealth Department of Agriculture and to obtain a representative sample of the entire contract/shipment (refer Note 3)
