Safety Chains Sample Clauses

Safety Chains. Safety chains shall be rated at no less than the rating specified by the OEM.
AutoNDA by SimpleDocs
Safety Chains. (Section 29004(a)-(c)). “(a)
Safety Chains. Shall be attached to the vehicle and MUST be connected to the vehicle in tow.
Safety Chains. Safety chains shall be rated at no less than the rating specified by the OEM. All safety connections and attachments shall have a positive means, of sufficient strength, to ensure that the safety connection or attachment cannot disengage while in transit.
Safety Chains. Provide safety chains of galvanized steel, straight-link type, 3/16 inch diameter, with at least 12 links per foot, and with snap hooks on each end. Test safety chain in accordance with ASTM A467/A467M, Class CS. Provide snap hooks of boat type. Provide galvanized 3/8 inch bolt with 3/4 inch eye diameter for attachment of chain, anchored as indicated. Supply two chains, 4 inches longer than the opening spacing, for each guarded area. Locate guardrail safety chain where indicated.

Related to Safety Chains

  • Safety Footwear 1. The State will provide employees in the classifications listed in Section 7 below, and employees who are currently required to wear safety footwear by Department Work Rules, an allowance of one hundred twenty dollars ($120.00) for replacement of safety footwear.

  • Safety Boots Each employee, after 3 months’ continuous service, will be reimbursed (on production of a receipt), the cost of one pair of safety boots (approved by the employer), in each year, to a maximum of $110.00. Wet Weather All protective clothing such as wet weather jackets, safety helmets, welding jackets, welding xxxxxxx, welding gauntlets, rubber boots, etc, (which remain the property of the Company), will be supplied on all occasions deemed necessary.

  • Safety Glasses 10.3.1 Where a teacher is considered to be working in an “eye danger” area, the teacher shall receive a personal issue of standard neutral safety glasses which shall remain the property of the employer.

  • Safety Orientation All employees shall be certified in Safety Orientation. Safety Orientation shall consist of three parts: PART 1 - the CODC Interactive Rights and Responsibilities course; PART 2 - the XXXX course or equivalent, and PART 3 - Employer or Owner Project Specific Training. It is the responsibility of each employee to hold current certification and maintain certification in part 1 and Part 2. The Employer or Owner shall provide to each Employee before commencing work with PART 3 - Employer or Owner Project Specific Training. Each Employee shall be on the payroll and paid while receiving PART 3 training. As a condition of employment it is the sole responsibility of each and every employee to obtain, hold and maintain all current certification(s) in any and all legislated safety training requirements (i.e. WHMIS, Fall Arrest, etc.) that are trade specific. Supporting documentation of all legislated training must be provided by the employee to the Union prior to dispatch and to the employer upon hire and may be further requested by the employer at any time during the duration of their employment. Prior to the expiration of any certification, the Employer will notify the Employee of the pending expiration and give the Employee reasonable time to renew their certification. Further, prior to arriving at site, employees shall hold current qualification(s) for the specific tasks and equipment identified in the dispatch request. If the employee has to be trained after dispatch, all costs borne by the Employer shall be reimbursed by the Training Fund. The CODC Harassment Policy and Procedures, including the provisions regarding General Harassment and as amended from time to time shall be the minimum standard of this Agreement.

  • Safety Compliance Comply with Site safety programs, as they apply to RPR, and if required to do so by such safety programs, receive safety training specifically related to RPR’s own personal safety while at the Site.

  • Safety Program The Contractor shall design a specific safety program for the Work for the site(s). The Contractor shall establish and require all Subcontractors to establish reasonable safety programs. The Contractor shall also submit its standard monthly safety reports to the Owner and Design Professional. No imposition of responsibility on the Contractor for safety under this Contract shall relieve any subcontractor of its responsibility for safety of persons or property on or near the Project Site. The Contractor shall include in his plant he names of the person in charge of Safety.

  • Safety Shoes 3901 Employees who are required to wear steel-toed safety shoes will receive $200 toward the purchase and/or replacement of these shoes in the first quarter of each year. Any employee out on an authorized leave shall receive payment within thirty days of their return to paid duty. New employees who are required to wear steel- toed safety shoes will receive $200 toward the purchase of shoes in their first paycheck; for employees hired on or after December 1, he/she shall not receive an additional $200 in the following February.

  • Occupational Health & Safety Committee The parties agree to comply with the Occupational Health and Safety Act and any other federal, provincial or municipal health and safety legislation and regulations. Recognizing its responsibilities under the applicable legislation, the Employer agrees to accept as a member of its Occupational Health and Safety Committee, one representative selected or appointed by the Association from the bargaining unit. Such committee shall identify potential dangers and hazards, institute means of improving health and safety programs and recommend actions to be taken to improve conditions relating to occupational health and safety. Meetings shall be held every third month or more frequently if mutually agreed. The Committee shall maintain minutes of all meetings and make the same available for review.

  • Safety Issues The Tenant will procure that in the carrying out of the Building Improvement Plan:

  • Safety Boot Allowance ‌ Effective January 1, 2022, except for temporary and probationary employees, the Employer agrees to pay one hundred and eighty-five dollars ($185.00) in January of each year towards the cost of safety boots for each full time employee requiring them and one hundred ($100.00) dollars for each part time employee requiring them under the Occupational Health and Safety Act and/or by the Employer, provided the Employee is not eligible for safety footwear through the Workplace Safety and Insurance Board.

Time is Money Join Law Insider Premium to draft better contracts faster.