Quality Problems Sample Clauses

Quality Problems. Licensee and Grant shall cooperate to resolve problems Licensee or its Sub-Licensees may have in complying with Atlas Bradford Connection standards and specifications of quality. In the event Atlas Bradford Connections that are Threaded or Reconstructed by Licensee or its Sub-Licensees utilizing the licenses from Grant fail to comply with Grant standards and specifications of quality, then Licensee and its Sub-Licensees, as the case may be, shall refrain from marketing or selling such non-conforming Atlas Bradford Connections until such time as the problems causing such non conformance are solved.
Sample 1Sample 2
AutoNDA by SimpleDocs
Quality Problems. 1. In case of deviations from the product- or the performance specification (drawing, technical terms of delivery, material, material properties, etc.) or from released procedures, the Sup- plier shall obtain a written deviation permit from GAUDLITZ before delivering the products. Potential arising expenditures which result from granting the deviation permit shall be at the Supplier’s expense.
Sample 1Sample 2
Quality Problems. In the event of product non-conformity, it must be possible to trace back production so that the affected batches of products can be isolated. The customer will provide the Supplier with the necessary data for tracing back. In so far as the problems relate to product quality, it is the Supplier’s duty to develop solutions once a complaint has been made. The Supplier shall ensure that it has rapid access at all times to the necessary resources for the investigation and analysis of defects. The procedure for the management of complaints is to be standardised as follows (the Supplier will be notified by LEONI of the detailed particulars required for this in the relevant test report): ▪ An initial response must be sent to LEONI at the latest on the next working day (for the Supplier) following receipt of the information/test report (where this is necessary for an in- itial response). Content of the initial response: 8D report including an “Immediate Measures” section. ▪ At the latest 10 working days after the issuing of the complaint by LEONI, LEONI is to be furnished with a comprehensive 8D report. Should it not be possible for the Supplier to submit a comprehensive 8D report within this timeframe, the Supplier must notify LEONI of this fact, accompanying its notification with a well-founded interim report. This interim report must name a date previously agreed upon with Leoni by which the comprehensive 8D report (or next interim report) will be submitted. ▪ These deadlines may be reduced by a reasonable period of time at the request of LEONI or the customer in question. The deadline of 10 days (for submission of the comprehensive 8D report) may only be extended on the basis of well-founded interim reports being submitted. However, this will be at the discre- tion of LEONI or a particular client of LEONI. Final defect analysis reports must be to the point, conclusive and comprehensive. The Supplier is required to provide proof of effectiveness of all the necessary measures. The reporting format to be used is that of the 8D report. If the Supplier is unable to restore the agreed level of quality within the mutually agreed timeframe, LEONI will be entitled to demand that the Supplier seek help from an external service provider at the Supplier’s expense.
Sample 1
Quality Problems. (a) Without prejudice to Distributor taking the necessary and reasonable steps to minimise damage to the public or its consumers, within 2 days of arrival of the Products at the Delivery Point, Distributor must inspect the Products and reject any Products that have visibly apparent Material Quality Problems by providing Supplier with written notice (Material Quality Problems Notice) of its rejection including written evidence (to the satisfaction of Supplier) of the Material Quality Problems.‌
Sample 1
Quality Problems. Tenaris shall cooperate to resolve problems Licensee may have in complying with Tenaris Premium Connection standards and specifications of quality. In the event Tenaris Premium Connections that are Threaded or Reconstructed by Licensee fail to comply with the Tenaris Premium Connections standards and specifications of quality, then Licensee shall refrain from marketing or selling such non-conforming Tenaris Premium Connections until such time as the problems causing such non conformance are solved. In the event that Licensee fails to resolve such problems within a reasonable time after discovery of the defect, or after the time it should have discovered the defect, Tenaris may terminate this Agreement by means of a written notice to Licensee.
Sample 1
Quality Problems. Should Stereotaxis identify a quality issue or problem on a component or subassembly and request Supplier to implement containment action on the part failure, Supplier shall, within 3 business days after receipt of Stereotaxis' request, deliver to Stereotaxis a documented containment plan. Stereotaxis will review the proposed plan and will promptly notify Supplier of acceptance or revisions to the plan. Upon acceptance of the containment plan Supplier shall commence implementation of plan and diligently proceed with implementation of plan to completion. Supplier will substantiate this containment plan with a closed loop corrective action identifying a permanent fix. Additionally, Supplier will implement a preventative action plan, as necessary, to prevent the occurrence of a quality issue or problem on a component or subassembly.
Sample 1
Quality Problems. If a quality problem occurs, then the batch and production data must be accessible within one calendar day. If the problem occurred due to the product quality, the contracting parties are required to work out an approach to solve the problem within one working day after the problem has occurred. The supplier must ensure that rapid access to resources for defect examination and defect analysis is always possible. The procedure for processing complaints was agreed to and defined as follows: - No later than 1 calendar day after receiving the complaint (or photographs, defective samples), confirmation of receipt must be sent to E+E Elektronik. - No later than 2 calendar days after receiving the returned parts (if necessary for the initial response), an initial response must be sent to E+E Elektronik. Content of the initial response: 8D report, filled out up to and including the point “Immediate measures”. - No later than 14 calendar days after the complaint is issued by E+E Elektronik, a completed 8D report must be received by them. If the Supplier is not able to supply a complete 8D report within this deadline, he must report this to E+E Elektronik by a detailed interim report. This interim report must specify a deadline for submission of the complete 8D report (or for the next interim report). The time between two interim reports may not exceed 14 calendar days. The deadline (of 14 calendar days for submission of the completed 8D report) can only be extended by submitting detailed and clear interim reports. Final defect analysis reports must include specific, plausible and complete information. The 8D report is the default method for reporting. If the Supplier is not able to reach the agreed quality level within the agreed deadline, E+E Elektronik can require the support of an external consultant at the expense of the supplier.
Sample 1
AutoNDA by SimpleDocs
Quality Problems. In the event of a quality problem, access to batch and production data has to be possible within three business days. If the problems are due to the quality of the products, contractual partners are obligated to work out approaches to solutions within one business day after the problem has occurred. Supplier has to ensure that short-term access to resources for fault analysis is possible at any time. The procedure for the handling of complaints is stipulated as follows: - 2 working days at the latest after receipt of <information/parts> (or pictures, defect samples, respectively), acknowledgement of receipt has to be sent to juwi (3D). - 15 working days at the latest after receipt of <information/parts> (if needed for a primary response), primary response has to be sent to juwi. Contents of primary response: 8D-report including section „Immediate Measures“ (5D). - 30 working days at the latest after juwi issued the complaint, a complete 8D-report has to be submitted. If this is not possible, Supplier has to report this together with a detailed interim report. This interim report also has to state when the complete 8D-report (or the next interim report, respectively) will be submitted. The period between two interim reports must not exceed 14 calendar days. This period of time (of 14 calendar days for submitting the complete 8D- report) may only be prolonged on the basis of detailed interim reports Final fault analysis reports have to be meaningful, coherent and complete with regard to contents. The reporting format has to be that of the 8D-report.
Sample 1

Related to Quality Problems

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Product Complaints Subdistributor shall promptly notify Distributor of (but in no event later than 24 hours after receipt), and provide, upon Distributor’s request, reasonable assistance to address and investigate, any complaint or adverse claim about any Product or its use of which Subdistributor becomes aware;

  • Quality All products will be new and unused. All products provided by the Contractor must meet all federal, state, and local standards for quality and safety requirements. Products not meeting the requirements of this section will be deemed unacceptable and returned to the Contractor for credit at no charge to the State.

  • Quality Control A. Controlled Affiliate agrees to use the Licensed Marks and Name only in connection with the licensed services and further agrees to be bound by the conditions regarding quality control shown in attached Exhibit A as they may be amended by BCBSA from time-to-time.

  • Customer Complaints Each party hereby agrees to promptly provide to the other party copies of any written or otherwise documented complaints from customers of Dealer received by such party relating in any way to the Offering (including, but not limited to, the manner in which the Shares are offered by the Dealer Manager or Dealer), the Shares or the Company.

  • Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].

  • Compatibility 1. Any unresolved issue arising from a mutual agreement procedure case otherwise within the scope of the arbitration process provided for in this Article and Articles 25A to 25G shall not be submitted to arbitration if the issue falls within the scope of a case with respect to which an arbitration panel or similar body has previously been set up in accordance with a bilateral or multilateral convention that provides for mandatory binding arbitration of unresolved issues arising from a mutual agreement procedure case.

  • Product Claims You acknowledge that Company, not an App Distributor, is responsible for addressing any claims of yours or any third party relating to the Company application or your possession and/or use of the Company application, including, but not limited to: (i) product liability claims; (ii) any claim that the Company application fails to conform to any applicable legal or regulatory requirement; and (iii) claims arising under consumer protection or similar legislation. (5)

Time is Money Join Law Insider Premium to draft better contracts faster.