PROTECTION OF THE WORKS Sample Clauses

PROTECTION OF THE WORKS. Provide protection of the whole of the works contained in the Bills of Quantities, including casing , casing up, covering or such other means as may be necessary to avoid damage to the satisfaction of the PROJECT MANAGER and remove such protection when no longer required and make good any damage which may nevertheless have been done at completion free of cost to the Government.
Sample 1Sample 2Sample 3See All (8)
AutoNDA by SimpleDocs
PROTECTION OF THE WORKS. 1.7.7 Making good physical loss and repairing damage to the works.
Sample 1Sample 2Sample 3
PROTECTION OF THE WORKS. [11.1] Specific requirements: All work that requires protection during construction must be adequately protected up to practical completion
Sample 1
PROTECTION OF THE WORKS. (a) All finished EPC Works and Road Works shall be protected from damage, including that which could arise from other construction activities.
Sample 1
PROTECTION OF THE WORKS. 15.1 From the commencement of the Works to the date the Works are taken over by the Government, the Contractor shall take full responsibility for the care thereof together with all temporary works and in case any damages, loss or injury shall happen to the Works or to any part thereof or to any temporary works from any cause whatsoever, he shall at his own cost repair and make good the same to the satisfaction of S.O. The Contractor shall also be liable for any damage to the Works occasioned by him in the course of any operations carried during the Defects Liability Period.
Sample 1
PROTECTION OF THE WORKS. 5.1 If urgent action is necessary to protect the Works, and the Subcontractor fails to take the action, in addition to any other remedies available to it, ICG may take the necessary action. If the action was action which the Subcontractor should have taken at the Subcontractor’s cost, the cost incurred will be a debt due from the Subcontractor to ICG. ICG may give the Subcontractor prior written notice of its intention to take the action referred to in this clause 5.1.
Sample 1
PROTECTION OF THE WORKS 
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to PROTECTION OF THE WORKS

  • DESCRIPTION OF THE WORKS Employer’s objectives The scope of the request includes the recommended monthly preventative, quarterly and annual maintenance that needs to be conducted to ensure all areas of the airports are lit and compliant. It will include all the other adhoc request (labor rates) where required upon approval by the maintenance manager. The compliance will be based on the following: • Maintenance as per OEM • Organizational guidelines and codes of practice • OHS act 93 – Occupational Health and Safety • ISO 9001 – Quality management • ISO 14001 – Environmental Management • SANS 10142 – The wiring code • ICAO Annex 14 chapter 5. • ACSA Maintenance Procedure D060 024M This scope entails the maintenance and repair of LV systems and all lighting at Costal airports. In brief, maintenance involves servicing, repairs, and testing of lights and LV systems. This involves carrying out maintenance on electrical equipment such as LV DBs, electrical plant, wiring enclosures and luminaires and associated control systems, portable appliances and other specific electrical equipment, in order to minimize downtime, and ensure that the equipment performs at optimal levels and functions to specification at the specified areas. Servicing - performing routine preventive maintenance as prescribed by the original equipment manufacturer (OEM), ACSA’s planned maintenance routines, and applicable legal and design standards. Repairs – responding to breakdowns, callouts and restoring the equipment to safe working conditions on an as and when basis. Advisory – telephonically guiding airport electricians under emergency situations to ensure systems are safely shutdown or returned to service within stringent times. System Performance Test – Testing equipment performance against the OEM, ACSA, and statutory requirements for compliance and return to service purposes. Extent of the works The Contractor will be fully responsible for meeting all requirements in this document regarding the Works. For each piece of equipment, all work will be carried out to standards as required by the Original Equipment Manufacturer (OEM) as well as any applicable governing law and/or regulations. Where OEM standards differ from those required by this document the more stringent requirement shall apply. The Contractor will be fully responsible for obtaining (and keeping up to date with) said requirements. The proposed minimum scheduled maintenance activities can be found in annex H.

  • PROTECTION OF TEACHERS A. The Board recognizes its responsibility to give all reasonable support and assistance to teachers with respect to the maintenance of control and discipline in the classroom.

  • Protection of the Environment 14.1 The Government and the Contractor recognise that Petroleum Operations will cause some impact on the environment in the Contract Area. Accordingly, in performance of the Contract, the Contractor shall conduct its Petroleum Operations with due regard to concerns with respect to protection of the environment and conservation of natural resources and shall in particular;

  • Protection of Watershed PURCHASER shall take all necessary precautions to prevent damage to stream banks, any stream course, lake, reservoir, or forested wetland within or adjacent to the timber sale area. Definitions of Type F, Type D, and Type N streams contained in the Forest Practices Act apply to this contract. In addition to other protective measures required, PURCHASER shall discontinue all or part of the operations under this contract upon notice from STATE that operations will cause excessive damage to the watershed.

  • Protection of Customer Data The Supplier shall not delete or remove any proprietary notices contained within or relating to the Customer Data. The Supplier shall not store, copy, disclose, or use the Customer Data except as necessary for the performance by the Supplier of its obligations under this Call Off Contract or as otherwise Approved by the Customer. To the extent that the Customer Data is held and/or Processed by the Supplier, the Supplier shall supply that Customer Data to the Customer as requested by the Customer and in the format (if any) specified by the Customer in the Call Off Order Form and, in any event, as specified by the Customer from time to time in writing. The Supplier shall take responsibility for preserving the integrity of Customer Data and preventing the corruption or loss of Customer Data. The Supplier shall perform secure back-ups of all Customer Data and shall ensure that up-to-date back-ups are stored off-site at an Approved location in accordance with any BCDR Plan or otherwise. The Supplier shall ensure that such back-ups are available to the Customer (or to such other person as the Customer may direct) at all times upon request and are delivered to the Customer at no less than six (6) Monthly intervals (or such other intervals as may be agreed in writing between the Parties). The Supplier shall ensure that any system on which the Supplier holds any Customer Data, including back-up data, is a secure system that complies with the Security Policy and the Security Management Plan (if any). If at any time the Supplier suspects or has reason to believe that the Customer Data is corrupted, lost or sufficiently degraded in any way for any reason, then the Supplier shall notify the Customer immediately and inform the Customer of the remedial action the Supplier proposes to take. If the Customer Data is corrupted, lost or sufficiently degraded as a result of a Default so as to be unusable, the Supplier may: require the Supplier (at the Supplier's expense) to restore or procure the restoration of Customer Data to the extent and in accordance with the requirements specified in Call Off Schedule 8 (Business Continuity and Disaster Recovery) or as otherwise required by the Customer, and the Supplier shall do so as soon as practicable but not later than five (5) Working Days from the date of receipt of the Customer’s notice; and/or itself restore or procure the restoration of Customer Data, and shall be repaid by the Supplier any reasonable expenses incurred in doing so to the extent and in accordance with the requirements specified in Call Off Schedule 8 (Business Continuity and Disaster Recovery) or as otherwise required by the Customer. Confidentiality

  • PROTECTION OF WORK 12.1 Subcontractor shall effectually secure and protect the work done hereunder and assume full responsibility for the condition thereof until final acceptance by the OWNER and Contractor. Subcontractor further agrees to provide such protection as is necessary to protect the work and the workmen of Contractor, the OWNER, and other subcontractors from its operations.

  • Preservation, Maintenance, and Protection of the Property Inspections. Borrower will not destroy, damage, or impair the Property, allow the Property to deteriorate, or commit waste on the Property. Whether or not Borrower is residing in the Property, Borrower must maintain the Property in order to prevent the Property from deteriorating or decreasing in value due to its condition. Unless Lender determines pursuant to Section 5 that repair or restoration is not economically feasible, Borrower will promptly repair the Property if damaged to avoid further deterioration or damage. If insurance or condemnation proceeds are paid to Lender in connection with damage to, or the taking of, the Property, Borrower will be responsible for repairing or restoring the Property only if Xxxxxx has released proceeds for such purposes. Lender may disburse proceeds for the repairs and restoration in a single payment or in a series of progress payments as the work is completed, depending on the size of the repair or restoration, the terms of the repair agreement, and whether Borrower is in Default on the Loan. Lender may make such disbursements directly to Borrower, to the person repairing or restoring the Property, or payable jointly to both. If the insurance or condemnation proceeds are not sufficient to repair or restore the Property, Borrower remains obligated to complete such repair or restoration. Lender may make reasonable entries upon and inspections of the Property. If Lender has reasonable cause, Xxxxxx may inspect the interior of the improvements on the Property. Lender will give Borrower notice at the time of or prior to such an interior inspection specifying such reasonable cause.

  • PROTECTION OF WORK AND PROPERTY Contractor shall erect and properly maintain at all times, as required by conditions and progress of the Work, all necessary safeguards, signs, barriers, lights, and security persons for protection of workers and the public, and shall post danger signs warning against hazards created by the Work. In an emergency affecting life and safety of life or of Work or of adjoining property, Contractor, without special instruction or authorization from District, is permitted to act at his discretion to prevent such threatened loss or injury.

  • Protection of Improvements So far as practicable, Purchaser shall protect Specified Roads and other improvements (such as roads, trails, telephone lines, ditches, and fences):

  • Protection of Intellectual Property 1. The Parties shall grant and ensure adequate, effective and non-discriminatory protection of intellectual property rights, and provide for measures for the enforcement of such rights against infringement thereof, counterfeiting and piracy, in accordance with the provisions of this Article, Annex VI and the international agreements referred to therein.

Time is Money Join Law Insider Premium to draft better contracts faster.