Proper Operation and Maintenance Sample Clauses

Proper Operation and Maintenance. The permittee shall, at all times, properly operate and maintain all facilities and systems of treatment and control (and related appurtenances) which are installed or used by the permittee to achieve compliance with the conditions of this permit. Proper operation and maintenance includes the operation of backup or auxiliary facilities or similar systems only when necessary to achieve compliance with the conditions of the permit.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Proper Operation and Maintenance. The DOT shall properly operate and maintain all facilities and systems of treatment and control which are installed or used by the DOT to achieve compliance with the applicability criteria of this MOU and the DOT storm water management plan.
Sample 1Sample 2
Proper Operation and Maintenance. The Industrial User shall at all times properly operate and maintain all facilities and systems of Treatment and control (and related appurtenances) which are installed or used hy the Industrial User to achieve compliance with this Ordinance. Proper operation and maintenance includes but is not limited to: effective performance, adequate funding, adequate operator staffing and training, and adequate laboratory and process control, including appropriate quality assurance procedures. This provision requires the operation of back-up or auxiliary procedures only when necessary to achieve compliance with this Ordinance.
Sample 1
Proper Operation and Maintenance. The Discharger shall at all times properly operate and maintain all facilities and systems of treatment and control (and related appurtenances) which are installed or used by the Discharger to achieve compliance with the conditions of this Order. Proper operation and maintenance also includes laboratory controls and appropriate quality assurance procedures. This provision requires the operation of backup or auxiliary facilities or similar systems that are installed by a Discharger only when necessary to achieve compliance with the conditions of this Order [40 CFR §122.41(e)].
Sample 1
Proper Operation and Maintenance. The Permittee shall at all times properly operate and maintain all facilities and systems of treatment and control (and related appurtenances) which are installed or used by the Permittee to achieve compliance with the conditions of this Permit. Proper operation and maintenance includes but is not limited to: effective performance, adequate funding, adequate operator staffing and training, and adequate laboratory and process controls, including appropriate quality assurance procedures. This provision requires the operation of back-up or auxiliary facilities or similar systems only when necessary to achieve compliance with the conditions of the Permit.
Sample 1
Proper Operation and Maintenance. 1. Need to halt or reduce activity not a defense: It shall not be a defense for a permittee in an enforcement action to plead that it would have been necessary to halt or reduce the permitted activity in order to maintain compliance with the conditions of this permit.
Sample 1
Proper Operation and Maintenance. The Permittee shall keep and maintain an operation and maintenance log on all facilities and systems of treatment and control (and related appurtenances) which are installed or used by the Permittee to achieve compliance with the conditions of this permit. Proper operation and maintenance includes, but is not limited to, effective performance, adequate funding, adequate operator staffing and training and adequate laboratory and process controls, including appropriate quality assurance procedures. This provision requires the operation of back-up or auxiliary facilities or similar systems only when necessary to achieve compliance with the conditions of the permit. Water conservation practices shall be used to reduce total effluent volume. Waste preventative practices shall be used to reduce or eliminate contaminant loading to the municipal sewer system. In addition the following practices shall be used. 1. Chemicals shall be stored in a manner, which will prevent the entry of these solutions into the sanitary sewer, storm sewer system or waters of the State. All liquid chemicals will be stored in a no outlet area approved by the City. Process tanks shall be located in an area capable of containing 105 percent of the volume of the largest tank. This area shall not have an outlet to the City sanitary sewer, storm sewer system or waters of the State. a. Waste chemicals, chemical sludge, paint sludge or other hazardous waste shall be stored in approved containers inside a covered bermed area. The storage area shall be located at least 30 feet from the nearest sewer drain or outlet in order to prevent spills to the sanitary system, storm sewer system or waters of the State. The waste chemicals, chemical sludge, paint sludge or other hazardous waste shall be disposed of according to the regulations of EPA. The Permittee shall install shut-off devices to all drains in any hazardous waste storage areas. b. Chemicals shall be stored and dispensed only in roofed and bermed areas that eliminate potential spills to the sanitary sewer system, storm sewer system or waters of the State. Non-compatible chemicals must be segregated. 2. If appropriate, the Permittee shall obtain a hazardous waste generator number from EPA or the state for proper disposal of hazardous wastes. 3. If the Permittee utilizes a pretreatment system for the purpose of reducing pollutant levels, prior to discharge to the City sewer, a sampling site acceptable to the City, shall be maintained downstrea...
Sample 1
AutoNDA by SimpleDocs

Related to Proper Operation and Maintenance

  • Operation and Maintenance 17.1 O&M obligations of the Concessionaire

  • Construction and Maintenance There are on-going maintenance, renovation and construction projects taking place in and around the residences. The work typically takes place during regular business hours, but may begin earlier or extend into evenings or weekends. On-going construction or renovation projects will continue through midterm and final exam periods. The University will take measures to ensure that prudent construction practices are followed, but there may be noise, dust and temporary interruption of some services. Residents may be required to temporarily or permanently relocate to facilitate construction or renovation to their residence area. There will be no compensation or reduction to your residence fees due to disruption and/or relocation.

  • Operations and Maintenance Pursuant to Section 10.5 of this Agreement, Developer shall pay the reasonable expenses (including overheads) for the operation, maintenance, repair and replacement of Transmission Owner’s Attachment Facilities and incremental operating and maintenance expenses incurred in association with System Upgrade Facilities, if and to the extent provided for under Attachment S. For Transmission Owner’s Attachment Facilities, such expenses are calculated as follows:

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

  • Operation and Maintenance Manuals Receipts for transmittal of Operation and Maintenance Manuals, Brochures and Data to the Design Professional (or Commissioning Agent) as required by Section 6.1.1.5.

  • Planned Maintenance (a) Sellers may designate up to twenty (20) Days of Planned Maintenance on Sellers’ Facilities during each Contract Year. Sellers shall be entitled to reduce (including down to zero (0)) its Gas scheduling under Clause 8 and Exhibit 3 for each Day of Planned Maintenance.

  • Repairs and Maintenance The Tenant shall (a) take good care of the Apartment and all equipment and fixtures in it; (b) promptly make all necessary repairs and replacements whenever the need results from the Tenant's act of neglect or the neglect of Tenant’s family members, guests, visitors or contractors (if consented to by Landlord); (c) keep the Apartment and any other part of the building used by the Tenant as clean and safe as possible; and (d) promptly notify the Landlord when there are conditions which need repair. Landlord shall have a reasonable amount of time to make repairs. Tenant shall be responsible for reimbursing the Landlord for the cost of any repairs that are not "normal wear and tear" repairs, any such costs shall be considered additional rent; (e) shall not attach to, hang from or place anything on the railings of the patio or deck; and ( f ) Tenant agrees not to install any partition walls. No outside contractor is authorized to perform any services at the Apartment or apartment complex unless approved in writing by a representative of the Landlord. If Tenant contracts for any such services without written consent of the Landlord, Tenant shall be wholly responsible for the payment for any such service and shall hold the Landlord harmless against any claim made by a contractor who performs any such service at the request of the Tenant. Tenant shall also be responsible for returning the apartment back to its original condition, or else shall be liable to the Landlord for the costs incurred for the Landlord to do so after Tenant vacates.

  • Repair and Maintenance Except in the case of damage to or destruction of the Leased Premises, the Building, the Outside Areas or the Property caused by an act of God or other peril, in which case the provisions of Article 10 shall control, the parties shall have the following obligations and responsibilities with respect to the repair and maintenance of the Leased Premises, the Building, the Outside Areas, and the Property.

  • Operating and Maintenance Expenses Subject to the provisions herein addressing the use of facilities by others, and except for operations and maintenance expenses associated with modifications made for providing interconnection or transmission service to a third party and such third party pays for such expenses, the Interconnection Customer shall be responsible for all reasonable expenses including overheads, associated with: (1) owning, operating, maintaining, repairing, and replacing the Interconnection Customer’s Interconnection Facilities; and (2) operation, maintenance, repair and replacement of the Participating TO’s Interconnection Facilities.

  • Operating and Maintenance Costs The Participating Generator shall be responsible for all its costs incurred in connection with operating and maintaining the Generating Units identified in Schedule 1 for the purpose of meeting its obligations under this Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.